≥1:
US $1.24320
Buy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country CodeSearch results filter:
Home > Elec-component > IC Chips > Interface - Drivers, Receivers, Transceivers
Description: The AM26LS31PC is a quad differential line receiver designed to meet the requirements of EIA Standard RS-422. Features: - Inputs accept signals up to ±30V - High noise immunity - Hi
Stock:10000
Minimum:2
Favorite
DIP-16
Texas Instruments
01+
Quadruple Differential Line Receiver 16-PDIP 0 to 70
SN75ALS193N is a 16-pin DIP (dual in-line package) from Texas Instruments. It is a 4-bit synchronous binary up/down counter. Description: The SN75ALS193N is a 4-bit synchronous binary up/down counter
Stock:10000
Minimum:2
Favorite
Description: Quad Line Receiver Features: - Quad differential line receivers - High noise immunity - High speed performance - Low power dissipation - TTL compatible inputs - Outputs source/sink 24mA -
Stock:10000
Minimum:3
Favorite
SN75ALS174DWR is a SOP-20 package from Texas Instruments. It is a Quadruple Positive-Edge-Triggered D-Type Flip-Flop. Description: The SN75ALS174DWR is a quadruple positive-edge-triggered D-type flip
Stock:10000
Minimum:2
Favorite
SSOP-28
Intersil/harris
04+
LINE TRANSCEIVER|CMOS|4 DRIVER|5 RCVR|SSOP|28PIN|PLASTIC
Stock:10000
Minimum:2
Favorite
Description: The MAX485CPA is a low-power transceiver for RS-485 and RS-422 communication. It is designed to meet the requirements of both half-duplex and full-duplex communication. Features: Low-p
Stock:10000
Minimum:12
Favorite
Stock:10000
Minimum:2
Favorite
Description: The MC1489P is a dual line receiver designed for use in balanced data transmission systems. Features: - Low power consumption - High common-mode rejection ratio - High input impedance -
Stock:10000
Minimum:3
Favorite
Description: MAX222CPN is a dual operational amplifier (op amp) with a power supply voltage range of 4.5V to 16V. It features low power consumption, low input bias current, and high output current. F
Stock:10000
Minimum:2
Favorite
Description: MAX202ECWE is a dual RS-232 line driver/receiver designed for data communication over twisted-pair cables. Features: Operates From a Single +5V Supply Low Supply Current: 5.5mA Typ
Stock:10000
Minimum:2
Favorite
The MC1489AN is a dual line receiver manufactured by Texas Instruments (TI) and Motorola (MOTOROLA). It is a 14-pin DIP (Dual Inline Package) integrated circuit (IC) designed to receive two separate l
Stock:10000
Minimum:3
Favorite
SOP-24
Intersil
04+
+/- 15kV ESD Protected, +3V to +5.5V, Low Power, 250kbps, RS-232 Transmitters/Receivers
Stock:10000
Minimum:1
Favorite
SSOP24
Intersil
04+
+/-15kV, ESD-Protected, +5V Powered,RS-232 Transmitters/Receivers
Stock:10000
Minimum:1
Favorite
Description: The DS1489AM is a dual-channel, non-inverting, octal bus transceiver with 3-state outputs. Features: - Low power consumption - High speed - High noise immunity - Low input and output lea
Stock:10000
Minimum:4
Favorite
Description: MAX236ENG is a low-power, dual-driver/receiver designed for RS-232 and V.28/V.24 communications interfaces. Features: - Low power consumption - Low-cost - Low-voltage operation
Stock:10000
Minimum:1
Favorite
SOP-8
National Semiconductor
RES,Wirewound,0.22Ohms,5% Tol,-90,90ppm-TC,2515-Case
The DS89C21TM is a high-speed, low-power 8-bit microcontroller with 8K bytes of on-chip ROM and 128 bytes of on-chip RAM. Features: 8K bytes of on-chip ROM 128 bytes of on-chip RAM 8-bit CPU
Stock:10000
Minimum:2
Favorite
Description: MCZ33897EF is a low-power, high-performance 8-bit microcontroller from NXP USA Inc. Features: - 8-bit CPU core - Up to 32KB of Flash memory - Up to 2KB of RAM - Up to 16 I/O pins - Up t
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:2
Favorite
DIP-16
PHI
Negative Voltage Hot Swap Controller; Package: SO; No of Pins: 8; Temperature Range: 0°C to +70°C
Description: The AM26LS32CN is a quad differential line receiver manufactured by Texas Instruments. It is a 16-pin DIP (dual in-line package) integrated circuit designed to receive signals from a vari
Stock:10000
Minimum:2
Favorite
The SN75C188N is a Quadruple Differential Line Driver manufactured by Texas Instruments. It is a 14-pin DIP package that is designed to drive four differential lines in a balanced mode. Description:
Stock:10000
Minimum:2
Favorite
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company