≥1:
US $0.68500
Buy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country CodeSearch results filter:
Description: The CD4013BCN is a dual D-type flip-flop with set and reset. Features: Set and reset Clock inhibit Low power consumption High noise immunity High speed operation High
Stock:10000
Minimum:4
Favorite
TSSOP14
PH2
The 74HC74PW is a dual positive edge-trigger D-type Flip-flop with set and reset. It has individual data (nD), clock (nCP), set (nSD\) and reset (nRD\) inputs and complementary nQ and nQ\ outputs. Data at the nD-input, that meets the set-up and hold time requirements on the low-to-high clock transition, is stored in the flip-flop and appears at the nQ output. Schmitt-trigger action in the clock input, makes the circuit highly tolerant to slower clock rise and fall times. Inputs include clamp diodes that enable the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Description: Dual D-Type Flip-Flop with Preset and Clear Features: Wide supply voltage range: 2.0 V to 6.0 V Inputs accept voltages up to 6.0 V Outputs source/sink 24 mA Low power consumption
Stock:10000
Minimum:3
Favorite
Stock:10000
Minimum:4
Favorite
Description: The 74ACTQ18823SSC is a high-speed CMOS octal bus transceiver featuring non-inverting 3-state outputs and is designed for 2.7V to 3.6V VCC operation. Features: - High-speed operation: tp
Stock:5000
Minimum:1
Favorite
TSSOP14
FSC
MR, Active low P-P internal pullup, Active high P-P, -40C to +125C, 5-SOT-23, T/R
Stock:10000
Minimum:3
Favorite
DIP
Texas Instruments
01+
LMC7101 Tiny Low Power Operational Amplifier with Rail-To-Rail Input and Output; Package: SOT-23; No of Pins: 5
Stock:10000
Minimum:1
Favorite
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:1
Favorite
DIP-20
National Semiconductor
Octal D Flip-Flop with 3-STATE Outputs; Package: DIP; No of Pins: 20; Container: Rail
Stock:10000
Minimum:2
Favorite
DIP20
Ns/fsc
Quad Buffer with 3-STATE Outputs; Package: SOIC; No of Pins: 14; Container: Rail
Stock:10000
Minimum:3
Favorite
Description: The DM7474N is a dual negative-edge triggered D-type flip-flop with independent data, set, and reset inputs. Features: High-Speed Performance: tPD = 10 ns (typical) Low Power Cons
Stock:10000
Minimum:2
Favorite
SOP-14
Ns/fsc
1.5 A 280kHz/560kHz Boost Regulators; Package: SOIC-8 Narrow Body; No of Pins: 8; Container: Rail; Qty per Container: 98
Description: The MM74HC74AM is a dual D-type flip-flop with set and reset inputs. It is a high-speed, low-power, dual-in-line CMOS device. Features: High-speed operation Low-power consumption High
Stock:10000
Minimum:3
Favorite
Description: The MM74C74N is a dual D-type flip-flop with individual data, set, reset, and clock inputs and Q and Q outputs. Features: Positive-edge triggered Individual data, set, reset, and cloc
Stock:10000
Minimum:3
Favorite
DIP-14
National Semiconductor
86+
Small Signal Bias Resistor Transistor SC75 PNP 50V; Package: SC-75 SOT-416 3 LEAD; No of Pins: 3; Container: Tape and Reel; Qty per Container: 3000
Description: The MM74HCT74N is a dual D-type flip-flop with individual data, set, reset and clock inputs and complementary outputs. Features: High Speed Operation Low Power Consumption High Noise
Stock:10000
Minimum:4
Favorite
DIP-16
Texas Instruments
500mA, 5V,±2% Tolerance, Voltage Regulator, Ta = 0°C to +125°C; Package: DPAK 4 LEAD Single Gauge Surface Mount; No of Pins: 4; Container: Tape and Reel; Qty per Container: 2500
Description: Dual J-K Flip-Flop Features: - Inputs Include Clocks, Set, Reset, and Direct Clear - Outputs Source/Sink 24 mA - Fanout of 10 LSTTL Loads - Balanced Propagation Delay and Transition Times
Stock:10000
Minimum:5
Favorite
SN74HC175N is a Quad D-type flip-flop IC with a DIP-16 package manufactured by Texas Instruments. It is a high-speed CMOS logic device that is designed for low-power operation. Description: The SN74H
Stock:10000
Minimum:2
Favorite
Description: The MC14013BDG is a dual D-type flip-flop with set and reset. Features: - Low power consumption - Inputs are TTL compatible - Outputs are open collector - Set and reset inputs - Outputs
Stock:10000
Minimum:4
Favorite
Stock:10000
Minimum:2
Favorite
Description: Dual D-Type Flip-Flop with Set and Reset Features: -Wide supply voltage range: 2.0V to 6.0V -High noise immunity -Low power consumption -Typical tpd = 10ns -Inputs accept voltages
Stock:10000
Minimum:13
Favorite
Manufacturer: IDT Description: Octal D-Type Flip-Flop Features: High Speed: tPD = 10 ns (typical) at VCC = 5 V Low Power Consumption: ICC = 4 μA (max) at TA = 25°C Wide Operating Voltage Range: VCC
Stock:10000
Minimum:2
Favorite
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company