≥1:
US $2.26050
Buy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country CodeSearch results filter:
Home > Elec-component > IC Chips > PMIC - Motor Drivers, Controllers
HTSSOP-28
Texas Instruments
13+
The DRV8841 provides an integrated dual H-bridge motor driver solution for printers, scanners, and other automated equipment applications. The device can be used to drive one or two brushed DC motors, a bipolar stepper motor, or other loads. A simple PWM interface allows easy interfacing to controller circuits. The output driver block consists of N-channel power MOSFETs configured as H-bridges. The DRV8841 an supply up to 2.5-A peak or 1.75-A RMS output current (with proper heat sinking at 24 V and TA = 25°C) per H-bridge. A low-power sleep mode is provided which shuts down internal circuitry to achieve very low quiescent current draw. This sleep mode can be set using a dedicated nSLEEP pin. Internal protection features are provided for overtemperature, overcurrent, and undervoltage. Fault conditions are indicated by a nFAULT pin.
The DRV8841PWPR is a dual full-bridge motor driver from Texas Instruments. It is designed to drive two brushed DC motors with a voltage range of 4.5 V to 36 V. It features a low RDS(on) of 0.3 Ω, a lo
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:1
Favorite
Description: The MPC17533EVEL is a 16-pin TSOP (Thin Small Outline Package) from Freescale Semiconductor. It is a low-power, low-voltage, low-cost, high-performance 8-bit microcontroller. Features:
Stock:10000
Minimum:1
Favorite
Stock:2000
Minimum:1
Favorite
QFN32
Allegro
13+
DMOS Microstepping Driver with Translator and Overcurrent Protection
Stock:10000
Minimum:1
Favorite
Stock:10000
Minimum:2
Favorite
Description: STMicroelectronics L9958 is a high-side power switch IC with integrated protection features. Features: High-side power switch Over-current protection Over-temperature protection Short
Stock:5000
Minimum:1
Favorite
Description: The A3953SLBTR is a high-performance, high-efficiency, full-bridge motor driver IC. Features: High-efficiency full-bridge driver Maximum output current up to 1.2A Internal thermal shu
Stock:10000
Minimum:2
Favorite
Description: The TA8428K is a bipolar integrated circuit designed for use in audio power amplifiers. Features: Low distortion Low noise High output power High efficiency Low power consum
Stock:10000
Minimum:2
Favorite
Description: The L6228N is a monolithic integrated circuit in a 24-pin DIP package. It is a dual full bridge driver designed for use in motion control applications. Features: - Low RDS(on) output sta
Stock:10000
Minimum:2
Favorite
Description: The A4973SLBTR-T is a fully integrated microstepping motor driver with built-in translator for easy operation. It is designed to operate bipolar stepper motors in full, half, quarter, and
Stock:10000
Minimum:2
Favorite
Description: The L6226PD is a high voltage, high current, three-phase motor driver IC from STMicroelectronics. Features: High voltage operation up to 600V High peak current up to 4A Three-phase m
Stock:5000
Minimum:1
Favorite
The A3977SLP is a microstepping motor driver IC with a built-in translator from Allegro MicroSystems. It is designed to operate bipolar stepper motors in full, half, quarter, and eighth-step modes, wi
Stock:10000
Minimum:1
Favorite
Description: The NJM3517D2 is a low noise, dual operational amplifier integrated circuit from JRC Japan. Features: Low noise: 4.5nV/√Hz at 1kHz Low power consumption: 4.2mA/channel Low distortio
Stock:10000
Minimum:1
Favorite
Stock:10000
Minimum:1
Favorite
Description: The TEA3718DP is a monolithic integrated circuit designed for use in the protection of power supplies and motor control circuits. Features: * Overvoltage protection * Undervoltage protec
Stock:10000
Minimum:2
Favorite
TSSOP-24
Allegro
NA
DMOS Microstepping Driver with Translator and Overcurrent Protection
Description: A4982SLPTR-T is a dual full-bridge motor driver IC from Allegro MicroSystems. It is designed to drive two DC motors with a wide range of current and voltage levels. Features: Dual full-
Stock:2000
Minimum:1
Favorite
Description: The L293E is a quadruple high-current half-H driver. Features: Output current up to 600mA Output clamp diodes for inductive transient suppression Thermal shutdown circuitry Separate l
Stock:10000
Minimum:2
Favorite
HTSSOP5
Texas Instruments
11+
Three Phase Pre-Driver with Dual Current Shunt Amplifiers and Buck Regulator – Hardware Controlled
Description: The DRV8302DCA is a three-phase, low-side gate driver with integrated MOSFETs and current sensing. It is designed to drive brushless DC (BLDC) motors in applications such as fans, pumps,
Stock:2000
Minimum:1
Favorite
Description: L6225PD is a high-side power switch designed for automotive applications. It is a monolithic integrated circuit in a HSOP20 package. Features: - High-side power switch - Low RDS(on) - Ov
Stock:2000
Minimum:1
Favorite
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company