RC4559P

Unity-Gain Bandwidth. 3 MHz Min Slew Rate. 1.5 V/ns Min Low Equivalent Input Noise Voltage

No Frequency Compensation Required No Latch Up Wide Common-Mode Voltage Range Low Power Consumption Designed to be Interchangeable with

The D packages are available taped and reeled. Add the suffix R to the device type when ordering. (i.e.,RC4559DR)

description

The is a dual high-performance operational amplifier. The high common-mode input voltage and the absence of latch-up make this amplifier ideal for low-noise signal applications such as audio preamplifiers and signal conditioners. This amplifier features a guaranteed dynamic performance and output drive capability that far exceeds that of the general-purpose type amplifiers.

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)

Supply voltage VCC+ (see Note 18 V Supply voltage VCC - (see Note -18 V Differential input voltage (see Note 30 V Input voltage (any input, see Notes 1 and 15 V Duration of output short-circuit to ground, one amplifier at a time (see Note 4). unlimited Continuous total dissipation. 500 mW Operating free-air temperature range. to 70°C Storage temperature range. to 125°C Lead temperature mm (1/16 inch) from case for 10 seconds. 260°C

NOTES: 1. All voltage values, unless otherwise noted, are with respect to the zero reference level (ground) of the supply voltages where the zero reference level is the midpoint between VCC+ and VCC-.

2. Differential voltages are at the noninverting input terminal with respect to the inverting input terminal. 3. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 volts, whichever is less. 4. Temperature and/or supply voltages must be limited to ensure that the dissipation rating is not exceeded.

electrical characteristics at specified free-air temperature, VCC+ 15 V, VCC- -15 V
Input voltage range Maximum peak output voltlage swing

Maximum output-swing bandwidth Unity-gain bandwidth Input resistance Common-mode rejection ratio Supply voltage sensitivity (VIO/VCC)

Equivalent input noise voltage (closed loop)

All characteristics are specified under open-loop operation, unless otherwise noted. Full range operating free-air temperature range to 70°C.

Status Package Type Package Pins Package Eco Plan

(1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device.

(2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based flame retardants must also meet the <=1000ppm threshold requirement.

(3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.

(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.

(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a will appear on a device. If a line is indented then is a continuation of the previous line and the two combined represent the entire Device Marking for that device.

(6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width.

Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and