≥1:
AU $3.45997
Buy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country CodeSearch results filter:
Home > Elec-component > IC Chips > PMIC - Motor Drivers, Controllers
HTSSOP-28
Texas Instruments
13+
The DRV8841 provides an integrated dual H-bridge motor driver solution for printers, scanners, and other automated equipment applications. The device can be used to drive one or two brushed DC motors, a bipolar stepper motor, or other loads. A simple PWM interface allows easy interfacing to controller circuits. The output driver block consists of N-channel power MOSFETs configured as H-bridges. The DRV8841 an supply up to 2.5-A peak or 1.75-A RMS output current (with proper heat sinking at 24 V and TA = 25°C) per H-bridge. A low-power sleep mode is provided which shuts down internal circuitry to achieve very low quiescent current draw. This sleep mode can be set using a dedicated nSLEEP pin. Internal protection features are provided for overtemperature, overcurrent, and undervoltage. Fault conditions are indicated by a nFAULT pin.
The DRV8841PWPR is a dual full-bridge motor driver from Texas Instruments. It is designed to drive two brushed DC motors with a voltage range of 4.5 V to 36 V. It features a low RDS(on) of 0.3 Ω, a lo
Stock:10000
Minimum:2
Favorite
The A3955SB-T is a DMOS Microstepping Driver with Translator from Allegro MicroSystems. It is a bipolar stepper motor driver IC that is designed to operate bipolar stepper motors in full, half, quarte
Stock:10000
Minimum:2
Favorite
The A3959SLBTR-T is an integrated circuit (IC) designed by Allegro MicroSystems. It is a dual full-bridge motor driver that is designed to drive two DC motors or one bipolar stepper motor. It is packa
Stock:5000
Minimum:1
Favorite
Description: A2919SLBTR-T is an integrated circuit (IC) from Allegro MicroSystems. It is a high-performance, low-cost, full-bridge motor driver with a wide operating voltage range. Features: High-pe
Stock:10000
Minimum:1
Favorite
HTSSOP16
Texas Instruments
1331+
QUAD LOW-SIDE DRIVER IC 1 DRV880 3PWPR Datasheets Search Partnumber : Start with "DRV880 3PWPR " - Total : 63 ( 1/3 Page) NO Part no Electronics Description View Electronic Manufacturer 63 DRV8800 DMOS FULL-BRIDGE MOTOR DRIVERS
Description: DRV8803PWPR is a high-performance integrated motor driver from Texas Instruments. It is designed to drive two brushed DC motors with a peak output current of 1.5A per channel. Features:
Stock:10000
Minimum:1
Favorite
The U211B-M is an integrated circuit (IC) manufactured by Atmel. It is a 16-pin SOP (Small Outline Package) device. The U211B-M is a voltage supervisor IC that is designed to provide a reset signa
Stock:10000
Minimum:1
Favorite
Description: The A3987SLPTR-T is a fully integrated microstepping motor driver with built-in translator for easy operation. It is capable of driving up to 1.2A of current per phase without a heat sink
Stock:10000
Minimum:2
Favorite
QFN32
Allegro
13+
DMOS Microstepping Driver with Translator and Overcurrent Protection
Stock:10000
Minimum:1
Favorite
Description: The TB6600HG is a bipolar stepper motor driver IC from Toshiba America Electronic Components. It is a high-performance, low-voltage driver IC for two-phase bipolar stepper motors. Feat
Stock:10000
Minimum:1
Favorite
Stock:10000
Minimum:1
Favorite
HTSSOP28
Texas Instruments
1323+
STEPPER MOTOR CONTROLLER IC 1 DRV882 5PWPR Datasheets Search Partnumber : Start with "DRV882 5PWPR " - Total : 31 ( 1/2 Page) NO Part no Electronics Description View Electronic Manufacturer 31 DRV8821 DUAL STEPPER MOTOR CONTROLLER/DRIVER
DRV8825PWPR is a high-performance microstepping motor driver with a wide range of features and applications. It is designed to drive bipolar stepper motors in full, half, quarter, eighth, and sixteent
Stock:10000
Minimum:1
Favorite
The A3977SLP is a microstepping motor driver IC with a built-in translator from Allegro MicroSystems. It is designed to operate bipolar stepper motors in full, half, quarter, and eighth-step modes, wi
Stock:10000
Minimum:1
Favorite
Description: The A3979SLPTR-T is an integrated circuit (IC) designed by Allegro MicroSystems, Inc. It is a dual full-bridge motor driver IC with integrated protection features. Features: Integrat
Stock:10000
Minimum:2
Favorite
Description: The A4988SETTR-T is a complete microstepping motor driver with built-in translator for easy operation. It is designed to operate bipolar stepper motors in full, half, quarter, eighth, and
Stock:10000
Minimum:2
Favorite
The A3959SB-T is an integrated circuit (IC) from Allegro Microsystems. It is a full-bridge motor driver IC designed to drive bipolar stepper motors in a microstepping mode. It is capable of driving up
Stock:10000
Minimum:2
Favorite
Stock:5000
Minimum:1
Favorite
The A3906SESTR-T is a monolithic integrated circuit designed for use in a wide range of motor control applications. It is a dual full-bridge motor driver with integrated power MOSFETs, designed to dri
Stock:10000
Minimum:2
Favorite
Description: The A3959SLPTR-T is a monolithic integrated circuit designed to provide bidirectional motor control and drive capability for two brushed DC motors. Features: Low voltage operation: 2.7
Stock:2000
Minimum:1
Favorite
Description: The BD7903FS-E2 is a high-speed, low-power, low-noise, low-distortion, low-offset, low-dropout, low-distortion, low-offset, low-dropout, low-distortion, low-offset, low-dropout, low-disto
Stock:10000
Minimum:2
Favorite
Description: The A3955SLBTR-T is a monolithic integrated circuit designed for use in motion control applications such as stepper motor control. It is a full bridge microstepping driver that is capable
Stock:10000
Minimum:1
Favorite
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company