≥1:
R$186.46814
Olá! Login ou Registre-se agora
APP Manual de dados Transmissão ao vivo 290K likes UtsourceComprar(0)
Inquérito(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Adicionar endereço
Novo endereço de transporte de carga
* Por favor, preencha o número do telefone celular corretamente para ter certeza de que você pode receber as informações de rastreamento a tempo.
Código do paísFiltro de resultados de pesquisa:
Página inicial > Componentes Eletrônicos > Chips de IC > Aquisição de Dados - Conversores Analógico para Digital (ADC)
SOP
Linear
13+
The TLC549IP is a CMOS Analog-to-digital Converter (ADC) integrated circuits built around an 8-bit switched-capacitor successive-approximation ADC. This device is designed for serial interface with a microprocessor or peripheral through a 3-state data output and an analog input. The ADC uses only the input/output clock input along with the chip select input for data control. The maximum I/O CLOCK input frequency of the ADC is 1.11MHz. Operation of the ADC is very similar to that of the more complex TLC540 and TLC541 devices, however this provides an on-chip system clock that operates typically at 4MHz and requires no external components. The on-chip system clock allows internal device operation to proceed independently of serial input/output data timing and permits manipulation of the TLC548 as desired for a wide range of software and hardware requirements.
#PBF Description: The LTC1609ACSW#PBF is a high-speed, low-power CMOS dual 8-bit multiplying digital-to-analog converter (MDAC). Features: Low Power: 2.5mW/Channel Low Noise: 0.5LSB Max Low Cost
Estoque:2000
Mínimo:1
Favorito
DIP-8
Texas Instruments
The TLC549IP is a CMOS Analog-to-digital Converter (ADC) integrated circuits built around an 8-bit switched-capacitor successive-approximation ADC. This device is designed for serial interface with a microprocessor or peripheral through a 3-state data output and an analog input. The ADC uses only the input/output clock input along with the chip select input for data control. The maximum I/O CLOCK input frequency of the ADC is 1.11MHz. Operation of the ADC is very similar to that of the more complex TLC540 and TLC541 devices, however this provides an on-chip system clock that operates typically at 4MHz and requires no external components. The on-chip system clock allows internal device operation to proceed independently of serial input/output data timing and permits manipulation of the TLC548 as desired for a wide range of software and hardware requirements.
The TLC549IP is an 8-pin digital-to-analog converter (DAC) manufactured by Texas Instruments. It is a monolithic integrated circuit designed to provide a voltage output that is proportional to an 8-bi
Estoque:10000
Mínimo:1
Favorito
CDIP28
National Semiconductor
ADC1241 - Self Calibrating 12-Bit Plus Sign Microp-compatible A/D Converter With Sample-and-Hold, Package: Cerdip, Pin Nb=28
Description: The ADC1241CIJ is a 12-bit, high speed, successive approximation analog-to-digital converter (ADC) from Texas Instruments. Features: - 12-bit resolution - Up to 1.5MSPS conversion rate -
Estoque:2000
Mínimo:1
Favorito
DIP
Analog Devices
0338/01
The TLC549IP is a CMOS Analog-to-digital Converter (ADC) integrated circuits built around an 8-bit switched-capacitor successive-approximation ADC. This device is designed for serial interface with a microprocessor or peripheral through a 3-state data output and an analog input. The ADC uses only the input/output clock input along with the chip select input for data control. The maximum I/O CLOCK input frequency of the ADC is 1.11MHz. Operation of the ADC is very similar to that of the more complex TLC540 and TLC541 devices, however this provides an on-chip system clock that operates typically at 4MHz and requires no external components. The on-chip system clock allows internal device operation to proceed independently of serial input/output data timing and permits manipulation of the TLC548 as desired for a wide range of software and hardware requirements.
Description: The AD7820KN is a low power, 8-bit, successive approximation analog-to-digital converter (ADC) with an on-chip track-and-hold amplifier. Features: 8-bit resolution Low power consum
Estoque:2000
Mínimo:1
Favorito
DIP-28
ADI
0803+
The TLC549IP is a CMOS Analog-to-digital Converter (ADC) integrated circuits built around an 8-bit switched-capacitor successive-approximation ADC. This device is designed for serial interface with a microprocessor or peripheral through a 3-state data output and an analog input. The ADC uses only the input/output clock input along with the chip select input for data control. The maximum I/O CLOCK input frequency of the ADC is 1.11MHz. Operation of the ADC is very similar to that of the more complex TLC540 and TLC541 devices, however this provides an on-chip system clock that operates typically at 4MHz and requires no external components. The on-chip system clock allows internal device operation to proceed independently of serial input/output data timing and permits manipulation of the TLC548 as desired for a wide range of software and hardware requirements.
Description: The AD574AKN is a 12-bit, voltage output, digital-to-analog converter (DAC) with a serial interface. Features: 12-bit resolution Voltage output Serial interface Low power
Estoque:2000
Mínimo:1
Favorito
SSOP-24
Texas Instruments
1135+
The TLC549IP is a CMOS Analog-to-digital Converter (ADC) integrated circuits built around an 8-bit switched-capacitor successive-approximation ADC. This device is designed for serial interface with a microprocessor or peripheral through a 3-state data output and an analog input. The ADC uses only the input/output clock input along with the chip select input for data control. The maximum I/O CLOCK input frequency of the ADC is 1.11MHz. Operation of the ADC is very similar to that of the more complex TLC540 and TLC541 devices, however this provides an on-chip system clock that operates typically at 4MHz and requires no external components. The on-chip system clock allows internal device operation to proceed independently of serial input/output data timing and permits manipulation of the TLC548 as desired for a wide range of software and hardware requirements.
Description: The ADS1240E/1K is a 24-bit, low-power, low-noise, sigma-delta (Σ-Δ) analog-to-digital converter (ADC) from Texas Instruments. Features: 24-bit resolution Low power consumption: 1.2 m
Estoque:5000
Mínimo:1
Favorito
MSOP
Linear
13+
The TLC549IP is a CMOS Analog-to-digital Converter (ADC) integrated circuits built around an 8-bit switched-capacitor successive-approximation ADC. This device is designed for serial interface with a microprocessor or peripheral through a 3-state data output and an analog input. The ADC uses only the input/output clock input along with the chip select input for data control. The maximum I/O CLOCK input frequency of the ADC is 1.11MHz. Operation of the ADC is very similar to that of the more complex TLC540 and TLC541 devices, however this provides an on-chip system clock that operates typically at 4MHz and requires no external components. The on-chip system clock allows internal device operation to proceed independently of serial input/output data timing and permits manipulation of the TLC548 as desired for a wide range of software and hardware requirements.
Estoque:10000
Mínimo:1
Favorito
QFN
Linear
13+
The TLC549IP is a CMOS Analog-to-digital Converter (ADC) integrated circuits built around an 8-bit switched-capacitor successive-approximation ADC. This device is designed for serial interface with a microprocessor or peripheral through a 3-state data output and an analog input. The ADC uses only the input/output clock input along with the chip select input for data control. The maximum I/O CLOCK input frequency of the ADC is 1.11MHz. Operation of the ADC is very similar to that of the more complex TLC540 and TLC541 devices, however this provides an on-chip system clock that operates typically at 4MHz and requires no external components. The on-chip system clock allows internal device operation to proceed independently of serial input/output data timing and permits manipulation of the TLC548 as desired for a wide range of software and hardware requirements.
Description: Low Noise, Low Power, 16-Bit, 500ksps, 2-Channel, Simultaneous Sampling SAR ADC Features: 16-Bit Resolution 500ksps Simultaneous Sampling Rate Low Power: 500μA at 500ksps Low Noise:
Estoque:5000
Mínimo:1
Favorito
QFN
Linear
13+
The TLC549IP is a CMOS Analog-to-digital Converter (ADC) integrated circuits built around an 8-bit switched-capacitor successive-approximation ADC. This device is designed for serial interface with a microprocessor or peripheral through a 3-state data output and an analog input. The ADC uses only the input/output clock input along with the chip select input for data control. The maximum I/O CLOCK input frequency of the ADC is 1.11MHz. Operation of the ADC is very similar to that of the more complex TLC540 and TLC541 devices, however this provides an on-chip system clock that operates typically at 4MHz and requires no external components. The on-chip system clock allows internal device operation to proceed independently of serial input/output data timing and permits manipulation of the TLC548 as desired for a wide range of software and hardware requirements.
Estoque:10000
Mínimo:1
Favorito
SSOP
Linear
13+
The TLC549IP is a CMOS Analog-to-digital Converter (ADC) integrated circuits built around an 8-bit switched-capacitor successive-approximation ADC. This device is designed for serial interface with a microprocessor or peripheral through a 3-state data output and an analog input. The ADC uses only the input/output clock input along with the chip select input for data control. The maximum I/O CLOCK input frequency of the ADC is 1.11MHz. Operation of the ADC is very similar to that of the more complex TLC540 and TLC541 devices, however this provides an on-chip system clock that operates typically at 4MHz and requires no external components. The on-chip system clock allows internal device operation to proceed independently of serial input/output data timing and permits manipulation of the TLC548 as desired for a wide range of software and hardware requirements.
#PBF Description: The LTC1418CG#PBF is a low power, low noise, high accuracy, 8-channel, 12-bit analog-to-digital converter (ADC) with an integrated sample-and-hold amplifier. Features: Low Power:
Estoque:2000
Mínimo:1
Favorito
DIP
Analog Devices
96+
The TLC549IP is a CMOS Analog-to-digital Converter (ADC) integrated circuits built around an 8-bit switched-capacitor successive-approximation ADC. This device is designed for serial interface with a microprocessor or peripheral through a 3-state data output and an analog input. The ADC uses only the input/output clock input along with the chip select input for data control. The maximum I/O CLOCK input frequency of the ADC is 1.11MHz. Operation of the ADC is very similar to that of the more complex TLC540 and TLC541 devices, however this provides an on-chip system clock that operates typically at 4MHz and requires no external components. The on-chip system clock allows internal device operation to proceed independently of serial input/output data timing and permits manipulation of the TLC548 as desired for a wide range of software and hardware requirements.
Estoque:2000
Mínimo:1
Favorito
MSOP
Linear
13+
The TLC549IP is a CMOS Analog-to-digital Converter (ADC) integrated circuits built around an 8-bit switched-capacitor successive-approximation ADC. This device is designed for serial interface with a microprocessor or peripheral through a 3-state data output and an analog input. The ADC uses only the input/output clock input along with the chip select input for data control. The maximum I/O CLOCK input frequency of the ADC is 1.11MHz. Operation of the ADC is very similar to that of the more complex TLC540 and TLC541 devices, however this provides an on-chip system clock that operates typically at 4MHz and requires no external components. The on-chip system clock allows internal device operation to proceed independently of serial input/output data timing and permits manipulation of the TLC548 as desired for a wide range of software and hardware requirements.
#PBF Description: The LTC1864LACMS8#PBF is a low noise, low power, 8-channel, 12-bit, simultaneous sampling, successive approximation analog-to-digital converter (ADC) with an SPI-compatible serial i
Estoque:5000
Mínimo:1
Favorito
Estoque:10000
Mínimo:1
Favorito
DIP24
Maxim Integrated
16+
The TLC549IP is a CMOS Analog-to-digital Converter (ADC) integrated circuits built around an 8-bit switched-capacitor successive-approximation ADC. This device is designed for serial interface with a microprocessor or peripheral through a 3-state data output and an analog input. The ADC uses only the input/output clock input along with the chip select input for data control. The maximum I/O CLOCK input frequency of the ADC is 1.11MHz. Operation of the ADC is very similar to that of the more complex TLC540 and TLC541 devices, however this provides an on-chip system clock that operates typically at 4MHz and requires no external components. The on-chip system clock allows internal device operation to proceed independently of serial input/output data timing and permits manipulation of the TLC548 as desired for a wide range of software and hardware requirements.
Description: 8-Channel, 12-Bit, Serial ADC with Internal Reference Features: 8-Channel, 12-Bit, Serial ADC with Internal Reference Single +5V Supply Low Power Consumption: 2.5mW/Channel Low Cost
Estoque:2000
Mínimo:1
Favorito
SOP16
Maxim Integrated
13+
The TLC549IP is a CMOS Analog-to-digital Converter (ADC) integrated circuits built around an 8-bit switched-capacitor successive-approximation ADC. This device is designed for serial interface with a microprocessor or peripheral through a 3-state data output and an analog input. The ADC uses only the input/output clock input along with the chip select input for data control. The maximum I/O CLOCK input frequency of the ADC is 1.11MHz. Operation of the ADC is very similar to that of the more complex TLC540 and TLC541 devices, however this provides an on-chip system clock that operates typically at 4MHz and requires no external components. The on-chip system clock allows internal device operation to proceed independently of serial input/output data timing and permits manipulation of the TLC548 as desired for a wide range of software and hardware requirements.
Description: 8-Channel, 8-Bit, Serial, A/D Converter with Multiplexer Features: 8-Channel, 8-Bit Resolution Multiplexer with 8 Single-Ended or 4 Differential Inputs 0V to 5V Input Range Serial In
Estoque:10000
Mínimo:1
Favorito
LQFP64
Analog Devices
0742/
Dual 14-Bit, 20/40/65 MSPS, 3 V Analog-to-Digital Converter; Package: LQFP 7x7mm; No of Pins: 64; Temperature Range: Industrial
Estoque:2000
Mínimo:1
Favorito
QFN
Linear
13+
The TLC549IP is a CMOS Analog-to-digital Converter (ADC) integrated circuits built around an 8-bit switched-capacitor successive-approximation ADC. This device is designed for serial interface with a microprocessor or peripheral through a 3-state data output and an analog input. The ADC uses only the input/output clock input along with the chip select input for data control. The maximum I/O CLOCK input frequency of the ADC is 1.11MHz. Operation of the ADC is very similar to that of the more complex TLC540 and TLC541 devices, however this provides an on-chip system clock that operates typically at 4MHz and requires no external components. The on-chip system clock allows internal device operation to proceed independently of serial input/output data timing and permits manipulation of the TLC548 as desired for a wide range of software and hardware requirements.
The LTC2151IUJ-14#PBF is a high-speed, low-power, 14-bit, 1.2 GSPS A/D converter from Linear Technology. It features a wide input bandwidth of DC to 500 MHz, a low power consumption of only 1.2 W, and
Estoque:2000
Mínimo:1
Favorito
Description: The AD7715AR-5 is a low power, low noise, 24-bit sigma-delta (Σ-Δ) analog-to-digital converter (ADC) with on-chip programmable gain amplifier (PGA) and reference. Features: 24-bit reso
Estoque:10000
Mínimo:1
Favorito
DIP-28
ADI
0521+
The TLC549IP is a CMOS Analog-to-digital Converter (ADC) integrated circuits built around an 8-bit switched-capacitor successive-approximation ADC. This device is designed for serial interface with a microprocessor or peripheral through a 3-state data output and an analog input. The ADC uses only the input/output clock input along with the chip select input for data control. The maximum I/O CLOCK input frequency of the ADC is 1.11MHz. Operation of the ADC is very similar to that of the more complex TLC540 and TLC541 devices, however this provides an on-chip system clock that operates typically at 4MHz and requires no external components. The on-chip system clock allows internal device operation to proceed independently of serial input/output data timing and permits manipulation of the TLC548 as desired for a wide range of software and hardware requirements.
Description: The AD574AJN is a precision 8-bit successive approximation analog-to-digital converter (ADC) with an on-chip track-and-hold amplifier. Features: 8-bit resolution On-chip track-and-hold
Estoque:2000
Mínimo:1
Favorito
SOP
Linear
13+
The TLC549IP is a CMOS Analog-to-digital Converter (ADC) integrated circuits built around an 8-bit switched-capacitor successive-approximation ADC. This device is designed for serial interface with a microprocessor or peripheral through a 3-state data output and an analog input. The ADC uses only the input/output clock input along with the chip select input for data control. The maximum I/O CLOCK input frequency of the ADC is 1.11MHz. Operation of the ADC is very similar to that of the more complex TLC540 and TLC541 devices, however this provides an on-chip system clock that operates typically at 4MHz and requires no external components. The on-chip system clock allows internal device operation to proceed independently of serial input/output data timing and permits manipulation of the TLC548 as desired for a wide range of software and hardware requirements.
#PBF Description: The LTC1605ISW#PBF is a low power, low noise, rail-to-rail output, single-supply, CMOS operational amplifier. Features: - Low power: 1.3mA/amplifier - Low noise: 0.9nV/√Hz - Rail-t
Estoque:2000
Mínimo:1
Favorito
Especialistas em produção interrompida, podemos fornecer um grande número de componentes eletrônicos que foram interrompidos e são difíceis de encontrar, para facilitar a empresa de manutenção