≥1:
R$43.54428
Olá! Login ou Registre-se agora
APP Manual de dados Transmissão ao vivoComprar(0)
Inquérito(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Adicionar endereço
Novo endereço de transporte de carga
* Por favor, preencha o número do telefone celular corretamente para ter certeza de que você pode receber as informações de rastreamento a tempo.
Código do paísFiltro de resultados de pesquisa:
Página inicial > Componentes Eletrônicos > Chips de IC > Linear - Multiplicadores Analógicos, Divisores
Estoque:33950
Mínimo:1
Favorito
CAN-10
Analog Devices
The AD532 is the first pretrimmed single chip monolithic multiplier/divider. It guarantees a maximum multiplying error of ±1.0% and a ±10 V output voltage without the need for any external trimming resistors or output op amp. Because the AD532 is internally trimmed, its simplicity of use provides design engineers with an attractive alternative to modular multipliers, and its monolithic construction provides significant advantages in size, reliability and economy. Further, the AD532 can be used as a direct replacement for other IC multipliers that require external trim networks (such as the AD530).
Estoque:33951
Mínimo:1
Favorito
CDIP-18
Analog Devices
96+
The AD538 is a monolithic real-time computational circuit which provides precision analog multiplication, division, and exponentiation. The combination of low input and output offset voltages and excellent linearity results in accurate computation over an unusually wide input dynamic range. Laser wafer trimming makes multiplication and division with errors as low as 0.25% of reading possible, while typical output offsets of 100 microV or less add to the overall off-the-shelf performance level. Real-time analog signal processing is further enhanced by the device's 400 kHz bandwidth. The AD538's overall transfer function is Vo=Vy(Vz/Vx)m. Programming a particular function is via pin strapping. No external components are required for one-quadrant (positive input) multiplication and division. Two-quadrant (bipolar numerator) division is possible with the use of external level shifting and scaling resistors. The desired scale factor for both multiplication and division can be set using the on-chip +2 V or +10 V references, or controlled externally to provide simultaneous multiplication and division. Exponentiation with an M value from 0.2 to 5 can be implemented with the addition of one or two external resistors. Direct log ratio computation is possible by utilizing only the log ratio and output sections of the chip. Access to the multiple summing junctions adds further to the AD538's flexibility. Finally, a wide power-supply range of ±4.5 V to ±18 V allows operation from standard ±5 V, ± 12 V and ± 15 V supplies. The AD538 is available in two accuracy grades (A and B) over the industrial (-25°C to +85°C) temperature range and one grade (S) over the military (-55°C to +125°C) temperature range. The device is packaged in an 18-pin TO-118 hermetic size-brazed ceramic DIP. A-grade chips are also available.
Estoque:33950
Mínimo:1
Favorito
DIP14
Analog Devices
Dual 14-bit 125MSPS ADC with serialized LVDS output 48-VQFN -40 to 85
Estoque:33951
Mínimo:1
Favorito
Estoque:37987
Mínimo:1
Favorito
Estoque:33951
Mínimo:1
Favorito
Estoque:33902
Mínimo:1
Favorito
Estoque:33931
Mínimo:1
Favorito
Estoque:33950
Mínimo:1
Favorito
Estoque:38334
Mínimo:1
Favorito
Estoque:33951
Mínimo:1
Favorito
Estoque:33951
Mínimo:1
Favorito
Estoque:33951
Mínimo:1
Favorito
Estoque:33951
Mínimo:1
Favorito
Estoque:33951
Mínimo:1
Favorito
Estoque:37953
Mínimo:1
Favorito
Estoque:33951
Mínimo:1
Favorito
Estoque:33948
Mínimo:1
Favorito
Estoque:33947
Mínimo:1
Favorito
Especialistas em produção interrompida, podemos fornecer um grande número de componentes eletrônicos que foram interrompidos e são difíceis de encontrar, para facilitar a empresa de manutenção