74LCX541MTC
TSSOP-20
FSC
Low Voltage Octal Buffer/Line Driver with 5V Tolerant Inputs and Outputs; Package: TSSOP; No of Pins: 20; Container: Rail
Buy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country CodeSearch results filter:
Home > Elec-component > IC Chips > Logic - Buffers, Drivers, Receivers, Transceivers
TSSOP-20
FSC
Low Voltage Octal Buffer/Line Driver with 5V Tolerant Inputs and Outputs; Package: TSSOP; No of Pins: 20; Container: Rail
Stock:10000
Minimum:8
Favorite
TSSOP48
FS4
The LVT162244 and LVTH162244 contain sixteen non-inverting buffers with 3-STATE outputs designed to be employed as a memory and address driver, clock driver, or bus oriented transmitter/receiver. The device is nibble controlled. Individual 3-STATE control inputs can be shorted together for 8-bit or 16-bit operation. The LVT162244 and LVTH162244 are designed with equivalent 25ohm series resistance in both the HIGH and LOW states of the output. This design reduces line noise in applications such as memory address drivers, clock drivers, and bus transceivers/transmitters. The LVTH162244 data inputs include bushold, eliminating the need for external pull-up resistors to hold unused inputs. These buffers and line drivers are designed for low-voltage (3.3V) VCC applications, but with the capability to provide a TTL interface to a 5V environment. The LVT162244 and LVTH162244 are fabricated with an advanced BiCMOS technology to achieve high speed operation similar to 5V ABT while maintaining a low power dissipation.
Description: 74LVTH162244MTX is a 16-bit buffer/line driver with 3-state outputs in a 48-pin TSSOP package. Features: 16-bit buffer/line driver 3-state outputs Low voltage (2.7V to 3.6V) High spe
Stock:10000
Minimum:2
Favorite
TSSOP-20
FSC
Octal Buffer/Line Driver with 3-STATE Outputs; Package: TSSOP; No of Pins: 20; Container: Tape & Reel
Description: Octal Buffer/Line Driver with 3-State Outputs Features: - Low power consumption - High speed operation - High noise immunity - Outputs source/sink 24 mA - Outputs can be wired ORed - ESD
Stock:10000
Minimum:5
Favorite
TSSOP-20
FSC
Low Voltage Octal Buffer/Line Driver with 5V Tolerant Inputs and Outputs; Package: TSSOP; No of Pins: 20; Container: Rail
Stock:10000
Minimum:2
Favorite
Description: The NC7WZ16P6X is a low-power, high-speed CMOS logic device. It is a single inverter with Schmitt-trigger input. Features: Low Power Consumption: 1.5μA (max) High Speed: tpd = 3.
Stock:10000
Minimum:2
Favorite
SOP14
FSC
Quad Buffer with 3-STATE Outputs; Package: SOIC; No of Pins: 14; Container: Rail
Stock:10000
Minimum:2
Favorite
TSSOP-3
PH3
Quad buffer/line driver; 3-state - Description: Quad Buffer/Line Driver with Active LOW Output Enable; TTL Enabled 3-State ; Logic switching levels: TTL ; Number of pins: 14 ; Output drive capability: +/- 6 mA ; Power dissipation considerations: Low Power ; Propagation delay: 12 ns; Voltage: 4.5-5.5V; Package: SOT402-1 TSSOP14; Container: Reel Pack, SMD, 13"
Stock:10000
Minimum:3
Favorite
SOP-20
PH3
Octal buffer/line driver; 3-state - Description: Buffer/Line Driver; Non-Inverting 3-State ; Logic switching levels: CMOS ; Number of pins: 20 ; Output drive capability: +/- 8 mA ; Power dissipation considerations: Low Power or Battery Applications ; Propagation delay: 3.5@5V ns; Voltage: 2.0-5.5 V; Package: SOT163-1 SO20; Container: Tape reel smd
Description: The 74AHC244D,118 is a high-speed Si-gate CMOS device and is pin and functionally compatible with the 74HC244. Features: High-speed Si-gate CMOS technology Low power dissipation High
Stock:10000
Minimum:2
Favorite
SSOP-56
FSC
Non-Inverting Line Driver with 3-STATE Outputs; Package: SSOP; No of Pins: 56; Container: Rail
Stock:5000
Minimum:1
Favorite
DIP-20
STM
OCTAL BUS BUFFER WITH 3 STATE OUTPUTS HC540: INVERTED - HC541 NON INVERTED
Description: The M74HC541B1R is a high-speed CMOS 8-bit buffer/line driver with 3-state outputs. Features: - High-speed operation: tpd = 8.0 ns (typical) at VCC = 5 V - Low power dissipation: ICC = 4
Stock:10000
Minimum:2
Favorite
TSSOP-20
PH3
Octal buffer/line driver with 5 V tolerant inputs/outputs 3-state - Description: 3.3V Buffer/Line Driver; Non-Inverting 3-State ; Logic switching levels: TTL ; Number of pins: 20 ; Output drive capability: +/- 24 mA ; Power dissipation considerations: Low Power or Battery Applications ; Propagation delay: 2.8 @ 3.3V ns; Voltage: 1.2-3.6; Package: SOT360-1 TSSOP20; Container: Reel Pack, SMD, 13"
Stock:10000
Minimum:3
Favorite
Description: The MC74HC245ADWG is a high-speed CMOS logic octal bus transceiver fabricated with silicon gate C2MOS technology. Features: * High speed operation: tPD = 8.0 ns (typ.) at VCC = 5 V * Low
Stock:10000
Minimum:2
Favorite
Description: The SN74F541DWR is a high-speed octal buffer/line driver with 3-state outputs in a SOP-20P package. It is designed to be employed as a memory address driver, clock driver, or bus-oriented
Stock:10000
Minimum:2
Favorite
DIP-20
Texas Instruments
01+
1A, 6V,±2% Tolerance, Voltage Regulator, Ta = 0°C to +125°C; Package: TO-220, SINGLE GAUGE; No of Pins: 3; Container: Rail; Qty per Container: 50
Stock:10000
Minimum:2
Favorite
SOP-24
FSC
8-Bit Dual Supply Translating Transceiver with 3-STATE Outputs; Package: SOIC-Wide; No of Pins: 24; Container: Rail
Description: Octal Bus Transceiver with 3-State Outputs Features: Low Voltage (2.7 V to 3.6 V) VCC Operation High Speed (tPD = 8.5 ns) Typical VOLP (Output Ground Bounce) < 0.8 V at VCC = 3.3
Stock:10000
Minimum:2
Favorite
SOIC-16
On Semiconductor
Quad Noninverting Buffer, 3 State; Package: SOIC 14 LEAD; No of Pins: 14; Container: Tape and Reel; Qty per Container: 2500
Stock:10000
Minimum:3
Favorite
TSSOP20
FSC
Low Voltage Octal Bidirectional Transceiver with 3-STATE Inputs/Outputs; Package: TSSOP; No of Pins: 20; Container: Tape & Reel
Description: The 74LVT245MTCX is a low voltage octal bus transceiver with 3-state outputs. It is designed for low voltage (2.5V to 3.6V) VCC operation. Features: Low voltage operation: 2.5V to 3.6V
Stock:10000
Minimum:2
Favorite
SOP-20
PH3
Octal buffer, line driver; 3-state - Description: Octal Buffer/Line Driver; Non-Inverting 3-State ; Logic switching levels: CMOS ; Number of pins: 20 ; Output drive capability: +/- 7.8 mA ; Power dissipation considerations: Low Power or Battery Applications ; Propagation delay: 9@5V ns; Voltage: 2.0-6.0 V; Package: SOT163-1 SO20; Container: Reel Pack, SMD, 13", CECC
The 74HC244D is a high-speed CMOS logic octal buffer/line driver with 3-state outputs. It is designed to be used with 3.3V or 5V power supplies. Description: The 74HC244D is an octal buffer/line driv
Stock:10000
Minimum:4
Favorite
SOP-20
FSC
Octal 3-STATE Buffers; Package: SOIC-Wide; No of Pins: 20; Container: Tape & Reel
Stock:10000
Minimum:4
Favorite
SOT360
PH2
Octal bus transceiver with direction pin with 5 V tolerant inputs/outputs 3-state - Description: 3.3V Transceiver with Direction Pin; Non-Inverting 3-State ; Logic switching levels: TTL ; Number of pins: 20 ; Output drive capability: +/- 24 mA ; Power dissipation considerations: Low Power or Battery Applications ; Propagation delay: 2.9 @ 3.3V ns; Voltage: 1.2-3.6; Package: SOT360-1 TSSOP20; Container: Reel Pack, SMD, 13"
Description: The 74LVC245APW is a high-speed octal bus transceiver with 3-state outputs in a SOT360 package. Features: High-speed operation: tpd = 6.5 ns (typical) at VCC = 5 V Low power dissipati
Stock:10000
Minimum:4
Favorite
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company