≥1:
US $3.07340
Buy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country CodeSearch results filter:
Home > Elec-component > IC Chips > Interface - Drivers, Receivers, Transceivers
Description: The DS275S+ is a low-power, single differential line receiver designed to meet the requirements of EIA-422-B and ITU Recommendation V.11. Feature: Low Supply Current: 0.5 mA Low Input
Stock:10000
Minimum:1
Favorite
Description: RS-485/RS-422 Transceiver Features: Low Power Consumption: 0.6mA Typical Supply Current ±15kV ESD Protection on RS-485/RS-422 I/O Pins Hot-Swap Capable Slew-Rate Limited Drivers Reduc
Stock:10000
Minimum:50
Favorite
Stock:10000
Minimum:2
Favorite
Description: The ADM4853ARZ is a low-power, dual-channel, RS-485 transceiver with integrated termination resistors. Features: - High-speed data rates up to 10 Mbps - Low power consumption - Integrate
Stock:10000
Minimum:5
Favorite
ST3232CDR is a low-power, low-voltage, full-duplex, RS-232 transceiver IC from STMicroelectronics. It is available in a small 8-pin SOP package. Description: The ST3232CDR is a low-power, low-voltage
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:2
Favorite
Description: The MAX232CPE+ is a dual driver/receiver that includes a capacitive voltage generator to supply EIA-232 voltage levels from a single 5-V supply. Each receiver converts EIA-232 inputs to 5
Stock:10000
Minimum:5
Favorite
Description: The MAX232D is a dual driver/receiver that includes a capacitive voltage generator to supply TIA/EIA-232-F voltage levels from a single 5-V supply. Each receiver converts TIA/EIA-232-F in
Stock:10000
Minimum:2
Favorite
Description: RS-485/RS-422 Transceiver Feature: ±15kV ESD Protection on RS-485/RS-422 Ports Slew-Rate-Limited Drivers Reduce EMI and Undesirable Overshoot Low Power Consumption: 5μA (MAX)
Stock:10000
Minimum:10
Favorite
Description: RS-485/RS-422 Transceiver, 3.3V, 5V, 10Mbps, SSOP Features: Low-Power Consumption: 2.7mA Max 10Mbps Data Rate ±15kV ESD Protection on RS-485/RS-422 Ports Slew-Rate-Limited Drivers Red
Stock:5000
Minimum:1
Favorite
Description: Low-Voltage, High-Speed, 3-State, Differential Line Receiver Features: Low-Voltage Operation: 2.5V to 5.5V High-Speed Operation: tpd = 5.5ns (typ) Low Input Current: IIN = 0.4μA (max)
Stock:10000
Minimum:2
Favorite
Description: The MAX490CSA is a low-power, dual-channel, RS-485/RS-422 transceiver. It is designed for balanced communication on multipoint bus transmission lines. Features: Low Supply Current: 1
Stock:10000
Minimum:2
Favorite
Description: Dual RS-232 Transceiver with AutoShutdown Plus Features: - Low Supply Current: 0.5mA (Typ) - Low Shutdown Supply Current: 0.01mA (Typ) - AutoShutdown Plus Feature Reduces Supply Current t
Stock:10000
Minimum:3
Favorite
Description: The MAX1490BCPG is a low-power, low-voltage, differential line transceiver with integrated line termination resistors. Features: Low-power, low-voltage operation Integrated line termina
Stock:2000
Minimum:1
Favorite
The MAX3097ECSE+ is a low-power, single-channel, high-speed, low-voltage, RS-485/RS-422 transceiver from Maxim Integrated. It is housed in a 16-pin small outline package (SOP) and operates over a wide
Stock:10000
Minimum:2
Favorite
Description: The DS34C86TMX is a quad differential line receiver designed for EIA/TIA-422-B, ITU-T V.11 and RS-485 applications. Features: - High-speed operation: Data rate up to 10 Mbps - Low power
Stock:10000
Minimum:5
Favorite
Description: The MAX232AEWE+ is a dual driver/receiver that includes a capacitive voltage generator to supply EIA-232 voltage levels from a single 5V supply. The device is intended for short-distance
Stock:10000
Minimum:3
Favorite
Description: The MAX485ESA+T is a low-power transceiver for RS-485 and RS-422 communication. It is designed to meet the requirements of ANSI TIA/EIA-485-A and ITU Recommendation V.11. Features: Lo
Stock:10000
Minimum:5
Favorite
Description: USB1T11AM is a SOP14 package, FSC (Field-Effect Transistor) type device. Features: Low on-resistance Low input capacitance Low input leakage current High-speed switching High-tempera
Stock:10000
Minimum:10
Favorite
Description: The ADM4857 is a low power, low voltage, dual-channel, low-side, MOSFET driver with a logic-level input. Features: -Supply voltage range: 1.8 V to 5.5 V -Low quiescent current: 2.5 μA -H
Stock:10000
Minimum:3
Favorite
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company