≥1:
US $9.06840
Click Here to enter Utsource site
Hello! Sign In or Register now
APP Datasheet Live Stream 290K likes Utsource 1 Million+ Like UtsourceBuy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country CodeSearch results filter:
Home > Elec-component > IC Chips > PMIC - RMS to DC Converters
DIP-8
Analog Devices
Description: Precision Monolithic Instrumentation Amplifier Features: Low Offset Voltage: ±50μV Max Low Offset Voltage Drift: 0.5μV/°C Max Low Input Bias Current: ±10pA Max High Open-Loop Ga
Low Cost, Low Power, True RMS-to-DC Converter
Stock:5000
Minimum:1
Standard delivery
Express: Estimated arrival {0}
Standard delivery: Estimated arrival {0}
Stock:2000
Minimum:1
Standard delivery
Express: Estimated arrival {0}
Standard delivery: Estimated arrival {0}
DIP14
Analog Devices
Description: The AD536AJDZ is a precision monolithic integrated circuit designed to provide a low cost, low power, high accuracy solution for a variety of signal conditioning applications. Features:
The AD536A is a complete monolithic integrated circuit that performs true rms-to-dc conversion. It offers performance comparable or superior to that of hybrid or modular units costing much more. The AD536A directly computes the true rms value of any complex input waveform containing ac and dc components. A crest factor compensation scheme allows measurements with 1% error at crest factors up to 7. The wide bandwidth of the device extends the measurement capability to 300 kHz with less than 3 dB errors for signal levels greater than 100 mV. An important feature of the AD536A, not previously available in rms converters, is an auxiliary dB output pin. The logarithm of the rms output signal is brought out to a separate pin to allow the dB conversion, with a useful dynamic range of 60 dB. Using an externally supplied reference current, the 0 dB level can be conveniently set to correspond to any input level from 0.1 V to 2 V rms. The AD536A is laser trimmed to minimize input and output offset voltage, to optimize positive and negative waveform symmetry (dc reversal error), and to provide full-scale accuracy at 7 V rms. As a result, no external trims are required to achieve the rated unit accuracy. The input and output pins are fully protected. The input circuitry can take overload voltages well beyond the supply levels. Loss of supply voltage with the input connected to external circuitry does not cause the device to fail. The output is short-circuit protected. The AD536A is available in two accuracy grades (J and K) for commercial temperature range (0°C to 70°C) applications, and one grade (S) rated for the ?55°C to +125°C extended range. The AD536AK offers a maximum total error of ±2 mV ± 0.2% of reading, while the AD536AJ and AD536AS have maximum errors of ±5 mV ± 0.5% of reading. All three versions are available in a hermetically sealed 14-lead DIP or a 10-pin TO-100 metal header package. The AD536AS is also available in a 20-terminal leadless hermetically sealed ceramic chip carrier. The AD536A computes the true root-mean-square level of a complex ac (or ac plus dc) input signal and provides an equivalent dc output level. The true rms value of a waveform is a more useful quantity than the average rectified value because it relates directly to the power of the signal. The rms value of a statistical signal also relates to its standard deviation. An external capacitor is required to perform measurements to the fully specified accuracy. The value of this capacitor determines the low frequency ac accuracy, ripple amplitude, and settling time. The AD536A operates equally well from split supplies or a single supply with total supply levels from 5 V to 36 V. With 1 mA quiescent supply current, the device is well suited for a wide variety of remote controllers and battery-powered instruments.
Stock:2000
Minimum:1
Standard delivery
Express: Estimated arrival {0}
Standard delivery: Estimated arrival {0}
CAN8
Analog Devices
0746+
Description: The AD536AJHZ is a precision monolithic integrated circuit which performs the functions of a low-cost, low-power, wide dynamic range, true rms-to-dc converter. Features: Low power cons
The AD536A is a complete monolithic integrated circuit that performs true rms-to-dc conversion. It offers performance comparable or superior to that of hybrid or modular units costing much more. The AD536A directly computes the true rms value of any complex input waveform containing ac and dc components. A crest factor compensation scheme allows measurements with 1% error at crest factors up to 7. The wide bandwidth of the device extends the measurement capability to 300 kHz with less than 3 dB errors for signal levels greater than 100 mV. An important feature of the AD536A, not previously av
Stock:2000
Minimum:1
Standard delivery
Express: Estimated arrival {0}
Standard delivery: Estimated arrival {0}
Stock:10000
Minimum:1
Standard delivery
Express: Estimated arrival {0}
Standard delivery: Estimated arrival {0}
DIP-14
Analog Devices
97+
The AD536AJQ is a monolithic, low cost, precision, 8-bit, analog-to-digital converter (ADC) manufactured by Analog Devices. It is a single-channel, voltage-output, successive-approximation ADC that op
Integrated Circuit True RMS-to-DC Converter
Stock:2000
Minimum:1
Standard delivery
Express: Estimated arrival {0}
Standard delivery: Estimated arrival {0}
Stock:5000
Minimum:1
Standard delivery
Express: Estimated arrival {0}
Standard delivery: Estimated arrival {0}
Stock:2000
Minimum:1
Standard delivery
Express: Estimated arrival {0}
Standard delivery: Estimated arrival {0}
DIP-14
Analog Devices
03+
DIODE SCHOTTKY SINGLE 50V 333mW 0.41V-vf 15mA-IFM 1mA-IF 0.2uA-IR SOD-123 3K/REEL
Stock:2000
Minimum:1
Standard delivery
Express: Estimated arrival {0}
Standard delivery: Estimated arrival {0}
MSOP-8
LT
03+
Description: The LTC1966IMS8 is a low power, low noise, low dropout, dual output, high PSRR linear regulator. Features: Low Dropout Voltage: 350mV at 200mA Low Quiescent Current: 200μA High PSRR:
Precision Micropower, SIGMA RMS-to-DC Converter
Stock:2000
Minimum:1
Standard delivery
Express: Estimated arrival {0}
Standard delivery: Estimated arrival {0}
Stock:100000
Minimum:10
Standard delivery
Express: Estimated arrival {0}
Standard delivery: Estimated arrival {0}
DIP-8
Analog Devices
The AD736JNZ is an 8-pin DIP monolithic integrated circuit from Analog Devices. It is a low cost, high accuracy, low power, single-supply, voltage-output, 16-bit analog-to-digital converter (ADC). De
Low Cost, Low Power, True RMS-to-DC Converter
Stock:2000
Minimum:1
Standard delivery
Express: Estimated arrival {0}
Standard delivery: Estimated arrival {0}
Stock:5000
Minimum:1
Standard delivery
Express: Estimated arrival {0}
Standard delivery: Estimated arrival {0}
DIP-14
Analog Devices
N/A
Description: The AD637JQ is a monolithic, low cost, high accuracy, instrumentation amplifier from Analog Devices. Features: Low Cost High Accuracy Low Noise Low Offset Voltage Low Input Bias Curr
DIODE ZENER SINGLE 500mW 18Vz 5mA-Izt 0.0641 0.1uA-Ir 12.6 SOD-123 3K/REEL
Stock:2000
Minimum:1
Standard delivery
Express: Estimated arrival {0}
Standard delivery: Estimated arrival {0}
SOP-16
Analog Devices
The AD637JR is a monolithic active filter IC from Analog Devices. It is a low-cost, high-performance, low-power, single-supply, active filter with a wide range of applications. Description: The AD637
DIODE ZENER SINGLE 250mW 18Vz 5mA-Izt 0.05 0.1uA-Ir 12.6 DFN1006-2 3K/REEL
Stock:5000
Minimum:1
Standard delivery
Express: Estimated arrival {0}
Standard delivery: Estimated arrival {0}
DIP-14
Analog Devices
The AD637JD is a monolithic instrumentation amplifier (INA) from Analog Devices. It is a low cost, low power, single-supply INA with a wide bandwidth and high common-mode rejection ratio (CMRR). It is
High Precision, Wide-Band RMS-to-DC Converter
Stock:5000
Minimum:1
Standard delivery
Express: Estimated arrival {0}
Standard delivery: Estimated arrival {0}
Stock:100000
Minimum:10
Standard delivery
Express: Estimated arrival {0}
Standard delivery: Estimated arrival {0}
Stock:2000
Minimum:1
Standard delivery
Express: Estimated arrival {0}
Standard delivery: Estimated arrival {0}
SOP-16
Maxim Integrated
Description: Low-Power, Single-Supply, Quad, CMOS Analog Multiplexer/Demultiplexer Features: * Single-supply operation: 2.7 V to 12 V * Low power consumption: 0.8 μA max * Low on-resistance: 250 Ω ma
True RMS-to-DC Converters
Stock:5000
Minimum:1
Standard delivery
Express: Estimated arrival {0}
Standard delivery: Estimated arrival {0}
DIP-16P
Analog Devices
96+
The AD637AQ is a monolithic, low cost, high precision, wide dynamic range, instrumentation amplifier from Analog Devices. It is designed to provide a high degree of accuracy and stability over a wide
High Precision, Wide-Band RMS-to-DC Converter
Stock:2000
Minimum:1
Standard delivery
Express: Estimated arrival {0}
Standard delivery: Estimated arrival {0}
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company