Schnittstelle - Treiber, Empfänger, Transceiver

Description: The MAX3209EEUU is a low-power, single-channel, rail-to-rail input/output (RRIO) operational amplifier (op amp) with a shutdown mode. It operates from a single 2.7V to 5.5V supply and is

DS1489AM is a dual-channel, non-inverting, octal bus transceiver manufactured by Dallas Semiconductor. It is available in a small-outline package (SOP) and is designed for use in applications requirin

Description: The DS275S+ is a low-power, single differential line receiver designed to meet the requirements of EIA-422-B and ITU Recommendation V.11. Feature: Low Supply Current: 0.5 mA Low Input

ST3232CDR is a low-power, low-voltage, full-duplex, RS-232 transceiver IC from STMicroelectronics. It is available in a small 8-pin SOP package. Description: The ST3232CDR is a low-power, low-voltage

Description: Low-Power, Slew-Rate-Limited, RS-485/RS-422 Transceivers Features: Low-Power Shutdown Mode: 200μA (Typ) Slew-Rate Limited for Error-Free Data Transmission at High Data Rates ±15k

Description: Low Power, Half Duplex, RS-232 Transceiver Features: - Low power consumption - Low EMI - Low voltage operation - Half-duplex operation - High data rate - Low standby current - Low propaga

Description: RS-485/RS-422 Transceiver Features: - Low Power Consumption: 200μA Typical - Slew-Rate Limited for Error-Free Data Transmission - High Data Rates: 10Mbps - Differential Inputs and Output

Description: The MAX232CPE+ is a dual driver/receiver that includes a capacitive voltage generator to supply EIA-232 voltage levels from a single 5-V supply. Each receiver converts EIA-232 inputs to 5

Description: RS-485/RS-422 Transceiver Feature: ±15kV ESD Protection on RS-485/RS-422 Ports Slew-Rate-Limited Drivers Reduce EMI and Undesirable Overshoot Low Power Consumption: 5μA (MAX)

Description: Low-Voltage, High-Speed, 3-State, Differential Line Receiver Features: Low-Voltage Operation: 2.5V to 5.5V High-Speed Operation: tpd = 5.5ns (typ) Low Input Current: IIN = 0.4μA (max)

Description: The MAX483CPA+ is a low-power, low-voltage, quad-driver/receiver designed for RS-485 and RS-422 communication. Features: Low-power consumption: 4.5mA (typ) Low-voltage operation: 3V t

Description: Low-Power, Slew-Rate-Limited, RS-485/RS-422 Transceivers Features: - Low-Power Shutdown Mode: <1μA - Slew-Rate Limited for Error-Free Data Transmission: 0.5V/μs - High-Impedance Inputs an

Description: The MAX490CSA is a low-power, dual-channel, RS-485/RS-422 transceiver. It is designed for balanced communication on multipoint bus transmission lines. Features: Low Supply Current: 1

Description: The MAX3071EESA+T is a low-power, single-channel, low-voltage differential signaling (LVDS) line driver and receiver pair with integrated termination resistors. Features: Low-Power, Si

The MAX3097ECSE+ is a low-power, single-channel, high-speed, low-voltage, RS-485/RS-422 transceiver from Maxim Integrated. It is housed in a 16-pin small outline package (SOP) and operates over a wide

Description: The MAX485ESA+T is a low-power transceiver for RS-485 and RS-422 communication. It is designed to meet the requirements of ANSI TIA/EIA-485-A and ITU Recommendation V.11. Features: Lo

Description: USB1T11AM is a SOP14 package, FSC (Field-Effect Transistor) type device. Features: Low on-resistance Low input capacitance Low input leakage current High-speed switching High-tempera

Description: RS-232 Transceiver, 3.3V, 0.1μF, TSSOP Features: Low Supply Current: 5.5mA Low Shutdown Current: 0.1μA ±15kV ESD Protection on All Pins 3.3V Supply Operation ±5V Tolerant Inputs 0.1