ADT7468ARQZ
SOP
Analog Devices
05+
IC REMOTE THERMAL CTRLR 24QSOP
Buy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country CodeSearch results filter:
Home > Elec-component > IC Chips > PMIC - Thermal Management
Stock:10
Minimum:10
Favorite
Stock:1000
Minimum:10
Favorite
DIP-14
Analog Devices
90+
Monolithic Thermocouple Amplifiers with Cold Junction Compensation
The AD595CQ is a thermocouple cold junction compensator (CJC) from Analog Devices. It is a monolithic integrated circuit that provides a temperature-compensated voltage output proportional to the temp
Stock:33566
Minimum:1
Favorite
CDIP-14
Analog Devices
02+
Monolithic Thermocouple Amplifiers with Cold Junction Compensation
Stock:33950
Minimum:1
Favorite
SOIC8
Analog Devices
1152+
Monolithic Thermocouple Amplifiers with Cold Junction Compensation
Stock:37948
Minimum:1
Favorite
Stock:35
Minimum:10
Favorite
CDIP-14
Analog Devices
96+
Monolithic Thermocouple Amplifiers with Cold Junction Compensation
The AD595AQ is a monolithic integrated circuit temperature transducer manufactured by Analog Devices. It is a complete thermocouple-to-digital converter that provides a linear output voltage proportio
Stock:33846
Minimum:1
Favorite
Stock:10
Minimum:10
Favorite
DIP
Analog Devices
06+/Pb
Monolithic Thermocouple Amplifier with Cold Junction Compensation Pretrimmed for Type K Thermocouples; Package: Bottom-Brazed CerDIP; No of Pins: 14; Temperature Range: Industrial
Description: The AD595ADZ is a thermocouple amplifier that converts a low-level thermocouple signal into a linear voltage output. Features: Low Cost Wide Operating Temperature Range: -40°C to +85°C
Stock:33951
Minimum:1
Favorite
Stock:130
Minimum:10
Favorite
DIP-14
Analog Devices
N/A
Monolithic Thermocouple Amplifiers with Cold Junction Compensation
The AD594AQ is a precision integrated circuit temperature transducer from Analog Devices Inc. It is a monolithic, 14-pin DIP packaged IC which utilizes a band-gap junction to provide a precisely scale
Stock:33918
Minimum:1
Favorite
Stock:20
Minimum:10
Favorite
The AD595AQ is a monolithic integrated circuit temperature transducer manufactured by Analog Devices. It is a complete thermocouple-to-digital converter that provides a linearized output in the form o
Stock:33840
Minimum:1
Favorite
Minimum:10
Favorite
Minimum:10
Favorite
Stock:10
Minimum:10
Favorite
Stock:20
Minimum:10
Favorite
DIP-14
ADI
2011+
The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a thermocouple signal. Pin-strapping options allow it to be used as a linear amplifier-compensator or as a switched output setpoint controller using either fixed or remote setpoint control. It can be used to amplify its compensation voltage directly, thereby converting it to a stand-alone Celsius transducer with a low impedance voltage output. The AD594/AD595 includes a thermocouple failure alarm that indicates if one or both thermocouple leads become open. The alarm output has a flexible format which includes TTL drive capability. The AD594/AD595 can be powered from a single ended supply (including +5 V) and by including a negative supply, temperatures below 0°C can be measured. To minimize self-heating, an unloaded AD594/AD595 will typically operate with a total supply current 160 μA, but is also capable of delivering in excess of ±5 mA to a load. The AD594 is precalibrated by laser wafer trimming to match the characteristic of type J (iron-constantan) thermocouples and the AD595 is laser trimmed for type K (chromel-alumel) inputs. The temperature transducer voltages and gain control resistors are available at the package pins so that the circuit can be recalibrated for the thermocouple types by the addition of two or three resistors. These terminals also allow more precise calibration for both thermocouple and thermometer applications. The AD594/AD595 is available in two performance grades. The C and the A versions have calibration accuracies of ±1°C and ±3°C, respectively. Both are designed to be used from 0°C to +50°C, and are available in 14-pin, hermetically sealed, side-brazed ceramic DIPs as well as low cost cerdip packages.
Description: The AD595CDZ is a thermocouple cold junction compensator (CJC) with a linearized output. It is designed to provide a linear output voltage proportional to the temperature of a thermocoupl
Stock:33945
Minimum:1
Favorite
DIP-14
Analog Devices
N/A
Monolithic Thermocouple Amplifiers with Cold Junction Compensation
The AD595AD is a monolithic integrated circuit temperature transducer. It converts a temperature input into an output current proportional to the temperature. It is designed to operate with thermocoup
Stock:33949
Minimum:1
Favorite
20-SSOP (0.209", 5.30mm Width)
Maxim Integrated
Temp Monitoring System (Sensor) External Sensor SPI Output 20-SSOP
Description: RTD-to-Digital Converter Feature: ±0.1°C Accuracy from -200°C to +850°C 0.2°C Resolution 0.1°C Cold-Junction Compensation 0.1°C/°C Cold-Junction Compensation 0.2°C/°C Cold-Jun
Stock:33849
Minimum:1
Favorite
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company