IC Chips

74 series Digital Integrated Circuits

CD40 series Digital Integrated Circuits

Optical Couplers

Clock & Calculator ICs

Operational Amplifiers

Power Switch Ics

Driver Ics

Flash Memory

Memory

Audio Special Purpose

Clock/Timing - Application Specific

Clock/Timing - Clock Buffers, Drivers

Clock/Timing - Clock Generators, PLLs, Frequency Synthesizers

Clock/Timing - Delay Lines

Clock/Timing - IC Batteries

Clock/Timing - Programmable Timers and Oscillators

Clock/Timing - Real Time Clocks

Data Acquisition - ADCs/DACs - Special Purpose

Data Acquisition - Analog Front End (AFE)

Data Acquisition - Analog to Digital Converters (ADC)

Data Acquisition - Digital Potentiometers

Data Acquisition - Digital to Analog Converters (DAC)

Data Acquisition - Touch Screen Controllers

Embedded - CPLDs (Complex Programmable Logic Devices)

Embedded - DSP (Digital Signal Processors)

Embedded - FPGAs (Field Programmable Gate Array)

Embedded - FPGAs (Field Programmable Gate Array) with Microcontrollers

Embedded - Microcontroller, Microprocessor, FPGA Modules

Embedded - Microcontrollers

Embedded - Microcontrollers - Application Specific

Embedded - Microprocessors

Embedded - PLDs (Programmable Logic Device)

Embedded - System On Chip (SoC)

Interface - Analog Switches - Special Purpose

Interface - Analog Switches, Multiplexers, Demultiplexers

Interface - CODECs

Interface - Controllers

Interface - Direct Digital Synthesis (DDS)

Interface - Drivers, Receivers, Transceivers

Interface - Encoders, Decoders, Converters

Interface - Filters - Active

Interface - I/O Expanders

Interface - Modems - ICs and Modules

Interface - Modules

Interface - Sensor and Detector Interfaces

Interface - Sensor, Capacitive Touch

Interface - Serializers, Deserializers

Interface - Signal Buffers, Repeaters, Splitters

Interface - Signal Terminators

Interface - Specialized

Interface - Telecom

Interface - UARTs (Universal Asynchronous Receiver Transmitter)

Interface - Voice Record and Playback

Linear - Amplifiers - Audio

Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

Linear - Amplifiers - Special Purpose

Linear - Amplifiers - Video Amps and Modules

Linear - Analog Multipliers, Dividers

Linear - Comparators

Linear - Video Processing

Logic - Buffers, Drivers, Receivers, Transceivers

Logic - Comparators

Logic - Counters, Dividers

Logic - FIFOs Memory

Logic - Flip Flops

Logic - Gates and Inverters

Logic - Gates and Inverters - Multi-Function, Configurable

Logic - Latches

Logic - Multivibrators

Logic - Parity Generators and Checkers

Logic - Shift Registers

Logic - Signal Switches, Multiplexers, Decoders

Logic - Specialty Logic

Logic - Translators, Level Shifters

Logic - Universal Bus Functions

Memory - Batteries

Memory - Configuration Proms for FPGAs

Memory - Controllers

PMIC - AC DC Converters, Offline Switchers

PMIC - Battery Chargers

PMIC - Battery Management

PMIC - Current Regulation/Management

PMIC - Display Drivers

PMIC - Energy Metering

PMIC - Full, Half-Bridge Drivers

PMIC - Gate Drivers

PMIC - Hot Swap Controllers

PMIC - Laser Drivers

PMIC - LED Drivers

PMIC - Lighting, Ballast Controllers

PMIC - Motor Drivers, Controllers

PMIC - OR Controllers, Ideal Diodes

PMIC - PFC (Power Factor Correction)

PMIC - Power Distribution Switches, Load Drivers

PMIC - Power Management - Specialized

PMIC - Power Over Ethernet (PoE) Controllers

PMIC - Power Supply Controllers, Monitors

PMIC - RMS to DC Converters

PMIC - Supervisors

PMIC - Thermal Management

PMIC - V/F and F/V Converters

PMIC - Voltage Reference

PMIC - Voltage Regulators - DC DC Switching Controllers

PMIC - Voltage Regulators - DC DC Switching Regulators

PMIC - Voltage Regulators - Linear

PMIC - Voltage Regulators - Linear + Switching

PMIC - Voltage Regulators - Linear Regulator Controllers

PMIC - Voltage Regulators - Special Purpose

Specialized ICs

Modules

IGBT

IPM

Thyristors

Rectifiers

Power Supply

Smart Power Module

SCR,GTO and Diode

FET

Darlington Transistors

RF Modules

CNC PRODUCTS

ENCODER

Motor

Servo drive & amplifier & Servo

Diode Module

Transistor Module

Switch Relay

PLC

Inverter

Contactor & Breaker

Elevator Board

Industry Control

Transistors

Diodes

Bipolar transistors

Resistors

Carbon Film Resistors

Cement Resistors

Chassis Mount Resistors

Chip Resistor - Surface Mount

Current Sense Resistors

Fusible Chip Resistor

High Precision & Low TCR SMD Resistors

High Voltage Resistor

LED Strip Resistors

MELF Resistor

Metal Alloy Resistors

Metal Film Resistor (TH)

Metal Glaze Resistors

Metal Oxide Film Resistors

Metal Oxide Resistors

NTC Thermistors

PTC Thermistors

Photoresistors

Potentiometers & Variable Resistors

Precision Potentiometer

Resistor Networks & Arrays

Resistor Networks & Arrays (TH)

Ultra Low Resistors (SMD)

Variable Resistors

Varistors

Wirewound Resistors

Capacitors

Aluminum Electrolytic Capacitors - SMD

CL21 Capacitor

Ceramic Disc Capacitors

High Voltage Capacitors

Metallized Polyester Film Capacitor

Multilayer Ceramic Capacitors MLCC - Leaded

Multilayer Ceramic Capacitors MLCC - SMD/SMT

Mylar Capacitor

Niobium Oxide Capacitors

Polyester Film Capacitors

Solid Polymer Electrolytic Capacitor

Supercapacitors & Ultracapacitors

Suppression Capacitors

Tantalum Capacitors

Trimmers, Variable Capacitors

Inductors & Ferrite Beads & Transformers

Antennas

Current Transformers

General Inductors (TH)

HF Inductors

Inductors (SMD)

LINE Filter

Power Inductors

Power Transformer

RJ45 Transformer

Radial Inductor (TH)

The circular inductors

Crystals

49S

49SMD

49U

Ceramic Resonators

DIP Oscillators(XO)

Radial Cylinder Crystals

SAW Resonators

SMD Crystals

SMD Oscillators(XO)

Connectors

AV Connectors

Audio & Video Connectors

Banana and Tip Connectors

Card Edge Connectors

Circular Connectors

Connector - Card Sockets

Connectors

Connectors - Accessories

Connectors - Housings

Contacts

D-Sub Connectors

Ethernet Connectors/Modular Connectors

FFC, FPC (Flat Flexible) Connectors

Fiber Optic Connectors

IC & Component Sockets

LED Light Pipes

Mezzanine Connectors (Board to Board)

PCB Connectors - Headers, Male Pins

PCB Connectors - Headers, Receptacles, Female Sockets

PCB Connectors - Housings

Power Connectors

RF Connectors/Coaxial Connectors

Shunts & Jumpers

Terminal Blocks - Accessories

Terminal Blocks - Barrier Blocks

Terminal Blocks - Din Rail, Channel

Terminal Blocks - Headers, Plugs and Sockets

Terminals

Test Clips

Test Points/Test Rings

USB Connectors

Unspecified Connectors

Screw-type wiring

Spring-type wiring

Pluggable Terminal Blocks

Through-wall Terminal Blocks

Automotive Terminals

Terminal Housings, Insulation Sleeves & Blocks

Quick Disconnect Wire Connectors and Terminals

Spare & Wear Tooling

Automotive Connectors

PCB Connectors

Sign In

3.Enter "account center"->"My inquiries" and check the status of your inquiries

Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.

I agree all UTSOURCE Terms & Conditions,Privacy Statement
Agree Later Submit

Delivery Address

Alternate Text

+ Add Address

Confirm

The new shipping address

*Country/Region :
*Contact :
*Cell Phone:
+

* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.

Country Code
*Address :
*City :
Province/State :
*Province/State :
*Post Code :
Please enter a new 5-digit zip code..
Company :
Cancel
Submit

Data Acquisition - Analog to Digital Converters (ADC)

Filters:
clear
Alternate Text
relate product result :10000 items
Alternate Text Utsource
LTC1609ACSW#PBF

Enlarge

Original parts, guaranteed brand new

LTC1609ACSW#PBF

SOP

Linear

13+

The AD7731 is a complete analog front-end for process control applications. The device has a proprietary programmable gain front end that allows it to accept a range of input signal ranges, including low level signals, directly from a transducer. The sigmadelta architecture of the part consists of an analog modulator and a low pass programmable digital filter, allowing adjustment of filter cutoff, output rate and settling time. The part features three buffered differential programmable gain analog inputs (which can be configured as five pseudo-differential inputs), as well as a differential reference input. The part operates from a single +5 V supply and accepts seven unipolar analog input ranges: 0 to +20 mV, +40 mV, +80 mV, +160 mV, +320 mV, +640 mV and +1.28 V, and seven bipolar ranges: ±20 mV, ±40 mV, ±80 mV, ±160 mV, ±320 mV, ±640 mV and ±1.28 V. The peak-to-peak resolution achievable directly from the part is 16 bits at an 800 Hz output rate. The part can switch between channels with 1 ms settling time and maintain a performance level of 13 bits of peak-to-peak resolution. The serial interface on the part can be configured for three-wire operation and is compatible with microcontrollers and digital signal processors. The AD7731 contains self-calibration and system calibration options and features an offset drift of less than 5 nV/°C and a gain drift of less than 2 ppm/°C. The part is available in a 24-lead plastic DIP, a 24-lead SOIC and 24-lead TSSOP package. Applications Process Control PLCs/DCS Industrial Instrumentation

Utsource Original Store

≥1:

US $36.77603

US $33.09842

≥2:

US $36.77603

US $33.09842

≥5:

US $35.55016

US $31.99514

≥10:

US $35.05981

US $31.55383

≥20:

US $34.81464

US $31.33317

≥30:

US $34.32429

US $30.89186

≥50:

US $34.32429

US $30.89186

≥100:

US $34.07912

US $30.67120

≥500:

US $33.83394

US $30.45055

From: US $33.83394

#PBF Description: The LTC1609ACSW#PBF is a high-speed, low-power CMOS dual 8-bit multiplying digital-to-analog converter (MDAC). Features: Low Power: 2.5mW/Channel Low Noise: 0.5LSB Max Low Cost

Stock:2000

Minimum:1

Favorite

AD7731BRZ

Enlarge

Used and refurbished parts guaranteed can work well

AD7731BRZ

SOP-24

Analog Devices

The AD7731 is a complete analog front-end for process control applications. The device has a proprietary programmable gain front end that allows it to accept a range of input signal ranges, including low level signals, directly from a transducer. The sigmadelta architecture of the part consists of an analog modulator and a low pass programmable digital filter, allowing adjustment of filter cutoff, output rate and settling time. The part features three buffered differential programmable gain analog inputs (which can be configured as five pseudo-differential inputs), as well as a differential reference input. The part operates from a single +5 V supply and accepts seven unipolar analog input ranges: 0 to +20 mV, +40 mV, +80 mV, +160 mV, +320 mV, +640 mV and +1.28 V, and seven bipolar ranges: ±20 mV, ±40 mV, ±80 mV, ±160 mV, ±320 mV, ±640 mV and ±1.28 V. The peak-to-peak resolution achievable directly from the part is 16 bits at an 800 Hz output rate. The part can switch between channels with 1 ms settling time and maintain a performance level of 13 bits of peak-to-peak resolution. The serial interface on the part can be configured for three-wire operation and is compatible with microcontrollers and digital signal processors. The AD7731 contains self-calibration and system calibration options and features an offset drift of less than 5 nV/°C and a gain drift of less than 2 ppm/°C. The part is available in a 24-lead plastic DIP, a 24-lead SOIC and 24-lead TSSOP package. Applications Process Control PLCs/DCS Industrial Instrumentation

Utsource

≥1:

US $22.00275

US $19.80248

≥2:

US $22.00275

US $19.80248

≥5:

US $21.26932

US $19.14239

≥10:

US $20.97596

US $18.87837

≥20:

US $20.82927

US $18.74634

≥30:

US $20.53590

US $18.48231

≥50:

US $20.53590

US $18.48231

≥100:

US $20.38922

US $18.35030

≥500:

US $20.24253

US $18.21828

From: US $20.24253

Description: The AD7731BRZ is a low power, low noise, 24-bit, sigma-delta (Σ-Δ) analog-to-digital converter (ADC) with an on-chip temperature sensor. Features: 24-bit resolution Low power consumpt

Stock:2000

Minimum:1

Favorite

AD7820KN

Enlarge

Original parts, guaranteed brand new

AD7820KN

DIP

Analog Devices

0338/01

The AD7731 is a complete analog front-end for process control applications. The device has a proprietary programmable gain front end that allows it to accept a range of input signal ranges, including low level signals, directly from a transducer. The sigmadelta architecture of the part consists of an analog modulator and a low pass programmable digital filter, allowing adjustment of filter cutoff, output rate and settling time. The part features three buffered differential programmable gain analog inputs (which can be configured as five pseudo-differential inputs), as well as a differential reference input. The part operates from a single +5 V supply and accepts seven unipolar analog input ranges: 0 to +20 mV, +40 mV, +80 mV, +160 mV, +320 mV, +640 mV and +1.28 V, and seven bipolar ranges: ±20 mV, ±40 mV, ±80 mV, ±160 mV, ±320 mV, ±640 mV and ±1.28 V. The peak-to-peak resolution achievable directly from the part is 16 bits at an 800 Hz output rate. The part can switch between channels with 1 ms settling time and maintain a performance level of 13 bits of peak-to-peak resolution. The serial interface on the part can be configured for three-wire operation and is compatible with microcontrollers and digital signal processors. The AD7731 contains self-calibration and system calibration options and features an offset drift of less than 5 nV/°C and a gain drift of less than 2 ppm/°C. The part is available in a 24-lead plastic DIP, a 24-lead SOIC and 24-lead TSSOP package. Applications Process Control PLCs/DCS Industrial Instrumentation

Utsource Original Store

≥1:

US $16.34490

US $14.71041

≥5:

US $15.43685

US $13.89317

≥10:

US $14.98283

US $13.48454

≥20:

US $14.52880

US $13.07592

≥50:

US $14.07478

US $12.66730

≥100:

US $13.89317

US $12.50385

≥200:

US $13.62075

US $12.25868

≥500:

US $13.43914

US $12.09523

≥1000:

US $13.16673

US $11.85005

From: US $13.16673

Description: The AD7820KN is a low power, 8-bit, successive approximation analog-to-digital converter (ADC) with an on-chip track-and-hold amplifier. Features: 8-bit resolution Low power consum

Stock:2000

Minimum:1

Favorite

AD574AKN

Enlarge

Original parts, guaranteed brand new

AD574AKN

DIP-28

ADI

0803+

The AD7731 is a complete analog front-end for process control applications. The device has a proprietary programmable gain front end that allows it to accept a range of input signal ranges, including low level signals, directly from a transducer. The sigmadelta architecture of the part consists of an analog modulator and a low pass programmable digital filter, allowing adjustment of filter cutoff, output rate and settling time. The part features three buffered differential programmable gain analog inputs (which can be configured as five pseudo-differential inputs), as well as a differential reference input. The part operates from a single +5 V supply and accepts seven unipolar analog input ranges: 0 to +20 mV, +40 mV, +80 mV, +160 mV, +320 mV, +640 mV and +1.28 V, and seven bipolar ranges: ±20 mV, ±40 mV, ±80 mV, ±160 mV, ±320 mV, ±640 mV and ±1.28 V. The peak-to-peak resolution achievable directly from the part is 16 bits at an 800 Hz output rate. The part can switch between channels with 1 ms settling time and maintain a performance level of 13 bits of peak-to-peak resolution. The serial interface on the part can be configured for three-wire operation and is compatible with microcontrollers and digital signal processors. The AD7731 contains self-calibration and system calibration options and features an offset drift of less than 5 nV/°C and a gain drift of less than 2 ppm/°C. The part is available in a 24-lead plastic DIP, a 24-lead SOIC and 24-lead TSSOP package. Applications Process Control PLCs/DCS Industrial Instrumentation

Utsource Original Store

≥1:

US $21.37410

US $19.23669

≥5:

US $20.18665

US $18.16799

≥10:

US $19.59293

US $17.63363

≥20:

US $18.99920

US $17.09928

≥50:

US $18.40548

US $16.56493

≥100:

US $18.16799

US $16.35119

≥200:

US $17.81175

US $16.03058

≥500:

US $17.57426

US $15.81683

≥1000:

US $17.21803

US $15.49622

From: US $17.21803

Description: The AD574AKN is a 12-bit, voltage output, digital-to-analog converter (DAC) with a serial interface. Features: 12-bit resolution Voltage output Serial interface Low power

Stock:2000

Minimum:1

Favorite

ADS1240E/1K

Enlarge

Original parts, guaranteed brand new

ADS1240E/1K

SSOP-24

Texas Instruments

1135+

The AD7731 is a complete analog front-end for process control applications. The device has a proprietary programmable gain front end that allows it to accept a range of input signal ranges, including low level signals, directly from a transducer. The sigmadelta architecture of the part consists of an analog modulator and a low pass programmable digital filter, allowing adjustment of filter cutoff, output rate and settling time. The part features three buffered differential programmable gain analog inputs (which can be configured as five pseudo-differential inputs), as well as a differential reference input. The part operates from a single +5 V supply and accepts seven unipolar analog input ranges: 0 to +20 mV, +40 mV, +80 mV, +160 mV, +320 mV, +640 mV and +1.28 V, and seven bipolar ranges: ±20 mV, ±40 mV, ±80 mV, ±160 mV, ±320 mV, ±640 mV and ±1.28 V. The peak-to-peak resolution achievable directly from the part is 16 bits at an 800 Hz output rate. The part can switch between channels with 1 ms settling time and maintain a performance level of 13 bits of peak-to-peak resolution. The serial interface on the part can be configured for three-wire operation and is compatible with microcontrollers and digital signal processors. The AD7731 contains self-calibration and system calibration options and features an offset drift of less than 5 nV/°C and a gain drift of less than 2 ppm/°C. The part is available in a 24-lead plastic DIP, a 24-lead SOIC and 24-lead TSSOP package. Applications Process Control PLCs/DCS Industrial Instrumentation

Utsource Original Store

≥1:

US $7.43204

US $6.68884

≥5:

US $7.06044

US $6.35439

≥10:

US $6.68884

US $6.01995

≥20:

US $6.50304

US $5.85273

≥50:

US $6.31723

US $5.68551

≥100:

US $6.13143

US $5.51829

≥200:

US $5.94563

US $5.35107

≥500:

US $5.87131

US $5.28418

≥1000:

US $5.75983

US $5.18385

From: US $5.75983

Description: The ADS1240E/1K is a 24-bit, low-power, low-noise, sigma-delta (Σ-Δ) analog-to-digital converter (ADC) from Texas Instruments. Features: 24-bit resolution Low power consumption: 1.2 m

Stock:5000

Minimum:1

Favorite

LTC2301CMS#PBF

Enlarge

Original parts, guaranteed brand new

LTC2301CMS#PBF

MSOP

Linear

13+

The AD7731 is a complete analog front-end for process control applications. The device has a proprietary programmable gain front end that allows it to accept a range of input signal ranges, including low level signals, directly from a transducer. The sigmadelta architecture of the part consists of an analog modulator and a low pass programmable digital filter, allowing adjustment of filter cutoff, output rate and settling time. The part features three buffered differential programmable gain analog inputs (which can be configured as five pseudo-differential inputs), as well as a differential reference input. The part operates from a single +5 V supply and accepts seven unipolar analog input ranges: 0 to +20 mV, +40 mV, +80 mV, +160 mV, +320 mV, +640 mV and +1.28 V, and seven bipolar ranges: ±20 mV, ±40 mV, ±80 mV, ±160 mV, ±320 mV, ±640 mV and ±1.28 V. The peak-to-peak resolution achievable directly from the part is 16 bits at an 800 Hz output rate. The part can switch between channels with 1 ms settling time and maintain a performance level of 13 bits of peak-to-peak resolution. The serial interface on the part can be configured for three-wire operation and is compatible with microcontrollers and digital signal processors. The AD7731 contains self-calibration and system calibration options and features an offset drift of less than 5 nV/°C and a gain drift of less than 2 ppm/°C. The part is available in a 24-lead plastic DIP, a 24-lead SOIC and 24-lead TSSOP package. Applications Process Control PLCs/DCS Industrial Instrumentation

Utsource Original Store

≥1:

US $3.87374

US $3.48637

≥5:

US $3.68005

US $3.31205

≥10:

US $3.48637

US $3.13773

≥20:

US $3.38952

US $3.05057

≥50:

US $3.29268

US $2.96341

≥100:

US $3.19584

US $2.87625

≥200:

US $3.09899

US $2.78909

≥500:

US $3.06026

US $2.75423

≥1000:

US $3.00215

US $2.70193

From: US $3.00215

Stock:10000

Minimum:1

Favorite

ADC108S022CIMT

Enlarge

Used and refurbished parts guaranteed can work well

ADC108S022CIMT

TSSOP16

National Semiconductor

12+

8-Channel, 50 kSPS to 200 kSPS, 10-Bit A/D Converter

Utsource

≥1:

US $3.90450

US $3.51405

≥5:

US $2.60300

US $2.34270

≥10:

US $2.34270

US $2.10843

≥20:

US $2.27762

US $2.04986

≥50:

US $2.21255

US $1.99129

≥100:

US $2.14748

US $1.93273

≥200:

US $2.08240

US $1.87416

≥500:

US $2.05637

US $1.85073

≥1000:

US $2.01732

US $1.81559

From: US $2.01732

Stock:10000

Minimum:2

Favorite

LTC2226CUH#PBF

Enlarge

Original parts, guaranteed brand new

LTC2226CUH#PBF

QFN

Linear

13+

The AD7731 is a complete analog front-end for process control applications. The device has a proprietary programmable gain front end that allows it to accept a range of input signal ranges, including low level signals, directly from a transducer. The sigmadelta architecture of the part consists of an analog modulator and a low pass programmable digital filter, allowing adjustment of filter cutoff, output rate and settling time. The part features three buffered differential programmable gain analog inputs (which can be configured as five pseudo-differential inputs), as well as a differential reference input. The part operates from a single +5 V supply and accepts seven unipolar analog input ranges: 0 to +20 mV, +40 mV, +80 mV, +160 mV, +320 mV, +640 mV and +1.28 V, and seven bipolar ranges: ±20 mV, ±40 mV, ±80 mV, ±160 mV, ±320 mV, ±640 mV and ±1.28 V. The peak-to-peak resolution achievable directly from the part is 16 bits at an 800 Hz output rate. The part can switch between channels with 1 ms settling time and maintain a performance level of 13 bits of peak-to-peak resolution. The serial interface on the part can be configured for three-wire operation and is compatible with microcontrollers and digital signal processors. The AD7731 contains self-calibration and system calibration options and features an offset drift of less than 5 nV/°C and a gain drift of less than 2 ppm/°C. The part is available in a 24-lead plastic DIP, a 24-lead SOIC and 24-lead TSSOP package. Applications Process Control PLCs/DCS Industrial Instrumentation

Utsource Original Store

≥1:

US $12.78335

US $11.50501

≥5:

US $12.07316

US $10.86584

≥10:

US $11.71807

US $10.54626

≥20:

US $11.36297

US $10.22668

≥50:

US $11.00788

US $9.90709

≥100:

US $10.86585

US $9.77926

≥200:

US $10.65279

US $9.58751

≥500:

US $10.51075

US $9.45968

≥1000:

US $10.29770

US $9.26793

From: US $10.29770

Description: Low Noise, Low Power, 16-Bit, 500ksps, 2-Channel, Simultaneous Sampling SAR ADC Features: 16-Bit Resolution 500ksps Simultaneous Sampling Rate Low Power: 500μA at 500ksps Low Noise:

Stock:5000

Minimum:1

Favorite

LTC2497IUHF#PBF

Enlarge

Original parts, guaranteed brand new

LTC2497IUHF#PBF

QFN

Linear

13+

The AD7731 is a complete analog front-end for process control applications. The device has a proprietary programmable gain front end that allows it to accept a range of input signal ranges, including low level signals, directly from a transducer. The sigmadelta architecture of the part consists of an analog modulator and a low pass programmable digital filter, allowing adjustment of filter cutoff, output rate and settling time. The part features three buffered differential programmable gain analog inputs (which can be configured as five pseudo-differential inputs), as well as a differential reference input. The part operates from a single +5 V supply and accepts seven unipolar analog input ranges: 0 to +20 mV, +40 mV, +80 mV, +160 mV, +320 mV, +640 mV and +1.28 V, and seven bipolar ranges: ±20 mV, ±40 mV, ±80 mV, ±160 mV, ±320 mV, ±640 mV and ±1.28 V. The peak-to-peak resolution achievable directly from the part is 16 bits at an 800 Hz output rate. The part can switch between channels with 1 ms settling time and maintain a performance level of 13 bits of peak-to-peak resolution. The serial interface on the part can be configured for three-wire operation and is compatible with microcontrollers and digital signal processors. The AD7731 contains self-calibration and system calibration options and features an offset drift of less than 5 nV/°C and a gain drift of less than 2 ppm/°C. The part is available in a 24-lead plastic DIP, a 24-lead SOIC and 24-lead TSSOP package. Applications Process Control PLCs/DCS Industrial Instrumentation

Utsource Original Store

≥1:

US $6.27644

US $5.64880

≥5:

US $5.96262

US $5.36636

≥10:

US $5.64880

US $5.08392

≥20:

US $5.49189

US $4.94270

≥50:

US $5.33498

US $4.80148

≥100:

US $5.17806

US $4.66026

≥200:

US $5.02115

US $4.51904

≥500:

US $4.95839

US $4.46255

≥1000:

US $4.86424

US $4.37782

From: US $4.86424

Stock:10000

Minimum:1

Favorite

LTC1418CG#PBF

Enlarge

Original parts, guaranteed brand new

LTC1418CG#PBF

SSOP

Linear

13+

The AD7731 is a complete analog front-end for process control applications. The device has a proprietary programmable gain front end that allows it to accept a range of input signal ranges, including low level signals, directly from a transducer. The sigmadelta architecture of the part consists of an analog modulator and a low pass programmable digital filter, allowing adjustment of filter cutoff, output rate and settling time. The part features three buffered differential programmable gain analog inputs (which can be configured as five pseudo-differential inputs), as well as a differential reference input. The part operates from a single +5 V supply and accepts seven unipolar analog input ranges: 0 to +20 mV, +40 mV, +80 mV, +160 mV, +320 mV, +640 mV and +1.28 V, and seven bipolar ranges: ±20 mV, ±40 mV, ±80 mV, ±160 mV, ±320 mV, ±640 mV and ±1.28 V. The peak-to-peak resolution achievable directly from the part is 16 bits at an 800 Hz output rate. The part can switch between channels with 1 ms settling time and maintain a performance level of 13 bits of peak-to-peak resolution. The serial interface on the part can be configured for three-wire operation and is compatible with microcontrollers and digital signal processors. The AD7731 contains self-calibration and system calibration options and features an offset drift of less than 5 nV/°C and a gain drift of less than 2 ppm/°C. The part is available in a 24-lead plastic DIP, a 24-lead SOIC and 24-lead TSSOP package. Applications Process Control PLCs/DCS Industrial Instrumentation

Utsource Original Store

≥1:

US $13.90134

US $12.51120

≥5:

US $13.12904

US $11.81614

≥10:

US $12.74289

US $11.46860

≥20:

US $12.35674

US $11.12107

≥50:

US $11.97060

US $10.77354

≥100:

US $11.81614

US $10.63452

≥200:

US $11.58445

US $10.42600

≥500:

US $11.42999

US $10.28699

≥1000:

US $11.19830

US $10.07847

From: US $11.19830

#PBF Description: The LTC1418CG#PBF is a low power, low noise, high accuracy, 8-channel, 12-bit analog-to-digital converter (ADC) with an integrated sample-and-hold amplifier. Features: Low Power:

Stock:5000

Minimum:1

Favorite

ADC10064CIWM

Enlarge

Used and refurbished parts guaranteed can work well

ADC10064CIWM

SOP-28

National Semiconductor

10-Bit 600 ns A/D Converter with Input Multiplexer and Sample/Hold

Utsource

≥1:

US $2.09550

US $1.88595

≥5:

US $1.39700

US $1.25730

≥10:

US $1.25730

US $1.13157

≥20:

US $1.22238

US $1.10014

≥50:

US $1.18745

US $1.06871

≥100:

US $1.15252

US $1.03727

≥200:

US $1.11760

US $1.00584

≥500:

US $1.10363

US $0.99327

≥1000:

US $1.08268

US $0.97441

From: US $1.08268

Stock:10000

Minimum:2

Favorite

AD574AKD

Enlarge

Original parts, guaranteed brand new

AD574AKD

DIP

Analog Devices

96+

The AD7731 is a complete analog front-end for process control applications. The device has a proprietary programmable gain front end that allows it to accept a range of input signal ranges, including low level signals, directly from a transducer. The sigmadelta architecture of the part consists of an analog modulator and a low pass programmable digital filter, allowing adjustment of filter cutoff, output rate and settling time. The part features three buffered differential programmable gain analog inputs (which can be configured as five pseudo-differential inputs), as well as a differential reference input. The part operates from a single +5 V supply and accepts seven unipolar analog input ranges: 0 to +20 mV, +40 mV, +80 mV, +160 mV, +320 mV, +640 mV and +1.28 V, and seven bipolar ranges: ±20 mV, ±40 mV, ±80 mV, ±160 mV, ±320 mV, ±640 mV and ±1.28 V. The peak-to-peak resolution achievable directly from the part is 16 bits at an 800 Hz output rate. The part can switch between channels with 1 ms settling time and maintain a performance level of 13 bits of peak-to-peak resolution. The serial interface on the part can be configured for three-wire operation and is compatible with microcontrollers and digital signal processors. The AD7731 contains self-calibration and system calibration options and features an offset drift of less than 5 nV/°C and a gain drift of less than 2 ppm/°C. The part is available in a 24-lead plastic DIP, a 24-lead SOIC and 24-lead TSSOP package. Applications Process Control PLCs/DCS Industrial Instrumentation

Utsource Original Store

≥1:

US $39.81450

US $35.83305

≥2:

US $39.81450

US $35.83305

≥5:

US $38.48735

US $34.63862

≥10:

US $37.95649

US $34.16084

≥20:

US $37.69106

US $33.92195

≥30:

US $37.16020

US $33.44418

≥50:

US $37.16020

US $33.44418

≥100:

US $36.89477

US $33.20529

≥500:

US $36.62934

US $32.96641

From: US $36.62934

Stock:2000

Minimum:1

Favorite

LTC1864LACMS8#PBF

Enlarge

Original parts, guaranteed brand new

LTC1864LACMS8#PBF

MSOP

Linear

13+

The AD7731 is a complete analog front-end for process control applications. The device has a proprietary programmable gain front end that allows it to accept a range of input signal ranges, including low level signals, directly from a transducer. The sigmadelta architecture of the part consists of an analog modulator and a low pass programmable digital filter, allowing adjustment of filter cutoff, output rate and settling time. The part features three buffered differential programmable gain analog inputs (which can be configured as five pseudo-differential inputs), as well as a differential reference input. The part operates from a single +5 V supply and accepts seven unipolar analog input ranges: 0 to +20 mV, +40 mV, +80 mV, +160 mV, +320 mV, +640 mV and +1.28 V, and seven bipolar ranges: ±20 mV, ±40 mV, ±80 mV, ±160 mV, ±320 mV, ±640 mV and ±1.28 V. The peak-to-peak resolution achievable directly from the part is 16 bits at an 800 Hz output rate. The part can switch between channels with 1 ms settling time and maintain a performance level of 13 bits of peak-to-peak resolution. The serial interface on the part can be configured for three-wire operation and is compatible with microcontrollers and digital signal processors. The AD7731 contains self-calibration and system calibration options and features an offset drift of less than 5 nV/°C and a gain drift of less than 2 ppm/°C. The part is available in a 24-lead plastic DIP, a 24-lead SOIC and 24-lead TSSOP package. Applications Process Control PLCs/DCS Industrial Instrumentation

Utsource Original Store

≥1:

US $12.34040

US $11.10636

≥5:

US $11.72338

US $10.55104

≥10:

US $11.10636

US $9.99572

≥20:

US $10.79785

US $9.71807

≥50:

US $10.48934

US $9.44040

≥100:

US $10.18083

US $9.16275

≥200:

US $9.87232

US $8.88509

≥500:

US $9.74892

US $8.77402

≥1000:

US $9.56381

US $8.60743

From: US $9.56381

#PBF Description: The LTC1864LACMS8#PBF is a low noise, low power, 8-channel, 12-bit, simultaneous sampling, successive approximation analog-to-digital converter (ADC) with an SPI-compatible serial i

Stock:5000

Minimum:1

Favorite

MAX190BCNG+

Enlarge

Original parts, guaranteed brand new

MAX190BCNG+

DIP24

Maxim Integrated

16+

The AD7731 is a complete analog front-end for process control applications. The device has a proprietary programmable gain front end that allows it to accept a range of input signal ranges, including low level signals, directly from a transducer. The sigmadelta architecture of the part consists of an analog modulator and a low pass programmable digital filter, allowing adjustment of filter cutoff, output rate and settling time. The part features three buffered differential programmable gain analog inputs (which can be configured as five pseudo-differential inputs), as well as a differential reference input. The part operates from a single +5 V supply and accepts seven unipolar analog input ranges: 0 to +20 mV, +40 mV, +80 mV, +160 mV, +320 mV, +640 mV and +1.28 V, and seven bipolar ranges: ±20 mV, ±40 mV, ±80 mV, ±160 mV, ±320 mV, ±640 mV and ±1.28 V. The peak-to-peak resolution achievable directly from the part is 16 bits at an 800 Hz output rate. The part can switch between channels with 1 ms settling time and maintain a performance level of 13 bits of peak-to-peak resolution. The serial interface on the part can be configured for three-wire operation and is compatible with microcontrollers and digital signal processors. The AD7731 contains self-calibration and system calibration options and features an offset drift of less than 5 nV/°C and a gain drift of less than 2 ppm/°C. The part is available in a 24-lead plastic DIP, a 24-lead SOIC and 24-lead TSSOP package. Applications Process Control PLCs/DCS Industrial Instrumentation

Utsource Original Store

≥1:

US $17.28927

US $15.56034

≥50:

US $16.95679

US $15.26111

≥100:

US $16.62430

US $14.96187

From: US $16.62430

Description: 8-Channel, 12-Bit, Serial ADC with Internal Reference Features: 8-Channel, 12-Bit, Serial ADC with Internal Reference Single +5V Supply Low Power Consumption: 2.5mW/Channel Low Cost

Stock:2000

Minimum:1

Favorite

MAX111BCWE+

Enlarge

Original parts, guaranteed brand new

MAX111BCWE+

SOP16

Maxim Integrated

13+

The AD7731 is a complete analog front-end for process control applications. The device has a proprietary programmable gain front end that allows it to accept a range of input signal ranges, including low level signals, directly from a transducer. The sigmadelta architecture of the part consists of an analog modulator and a low pass programmable digital filter, allowing adjustment of filter cutoff, output rate and settling time. The part features three buffered differential programmable gain analog inputs (which can be configured as five pseudo-differential inputs), as well as a differential reference input. The part operates from a single +5 V supply and accepts seven unipolar analog input ranges: 0 to +20 mV, +40 mV, +80 mV, +160 mV, +320 mV, +640 mV and +1.28 V, and seven bipolar ranges: ±20 mV, ±40 mV, ±80 mV, ±160 mV, ±320 mV, ±640 mV and ±1.28 V. The peak-to-peak resolution achievable directly from the part is 16 bits at an 800 Hz output rate. The part can switch between channels with 1 ms settling time and maintain a performance level of 13 bits of peak-to-peak resolution. The serial interface on the part can be configured for three-wire operation and is compatible with microcontrollers and digital signal processors. The AD7731 contains self-calibration and system calibration options and features an offset drift of less than 5 nV/°C and a gain drift of less than 2 ppm/°C. The part is available in a 24-lead plastic DIP, a 24-lead SOIC and 24-lead TSSOP package. Applications Process Control PLCs/DCS Industrial Instrumentation

Utsource Original Store

≥1:

US $5.85958

US $5.27362

≥50:

US $5.69529

US $5.12576

≥100:

US $5.47624

US $4.92862

From: US $5.47624

Description: 8-Channel, 8-Bit, Serial, A/D Converter with Multiplexer Features: 8-Channel, 8-Bit Resolution Multiplexer with 8 Single-Ended or 4 Differential Inputs 0V to 5V Input Range Serial In

Stock:10000

Minimum:1

Favorite

LTC2151IUJ-14#PBF

Enlarge

Original parts, guaranteed brand new

LTC2151IUJ-14#PBF

QFN

Linear

13+

The AD7731 is a complete analog front-end for process control applications. The device has a proprietary programmable gain front end that allows it to accept a range of input signal ranges, including low level signals, directly from a transducer. The sigmadelta architecture of the part consists of an analog modulator and a low pass programmable digital filter, allowing adjustment of filter cutoff, output rate and settling time. The part features three buffered differential programmable gain analog inputs (which can be configured as five pseudo-differential inputs), as well as a differential reference input. The part operates from a single +5 V supply and accepts seven unipolar analog input ranges: 0 to +20 mV, +40 mV, +80 mV, +160 mV, +320 mV, +640 mV and +1.28 V, and seven bipolar ranges: ±20 mV, ±40 mV, ±80 mV, ±160 mV, ±320 mV, ±640 mV and ±1.28 V. The peak-to-peak resolution achievable directly from the part is 16 bits at an 800 Hz output rate. The part can switch between channels with 1 ms settling time and maintain a performance level of 13 bits of peak-to-peak resolution. The serial interface on the part can be configured for three-wire operation and is compatible with microcontrollers and digital signal processors. The AD7731 contains self-calibration and system calibration options and features an offset drift of less than 5 nV/°C and a gain drift of less than 2 ppm/°C. The part is available in a 24-lead plastic DIP, a 24-lead SOIC and 24-lead TSSOP package. Applications Process Control PLCs/DCS Industrial Instrumentation

Utsource Original Store

≥1:

US $110.52421

US $99.47179

≥2:

US $110.52421

US $99.47179

≥5:

US $103.15593

US $92.84034

≥10:

US $103.15593

US $92.84034

≥20:

US $103.15593

US $92.84034

≥30:

US $103.15593

US $92.84034

≥50:

US $103.15593

US $92.84034

≥100:

US $102.41910

US $92.17719

≥500:

US $101.68228

US $91.51405

From: US $101.68228

The LTC2151IUJ-14#PBF is a high-speed, low-power, 14-bit, 1.2 GSPS A/D converter from Linear Technology. It features a wide input bandwidth of DC to 500 MHz, a low power consumption of only 1.2 W, and

Stock:2000

Minimum:1

Favorite

CS5513-BSZ

Enlarge

Used and refurbished parts guaranteed can work well

CS5513-BSZ

SOP-8

Cirrus

0613

16-bit and 20-bit, 8-pin Sigma-Delta ADC

Utsource

≥1:

US $8.19600

US $7.37640

≥5:

US $7.78620

US $7.00758

≥10:

US $7.37640

US $6.63876

≥20:

US $7.17150

US $6.45435

≥50:

US $6.96660

US $6.26994

≥100:

US $6.76170

US $6.08553

≥200:

US $6.55680

US $5.90112

≥500:

US $6.47484

US $5.82735

≥1000:

US $6.35190

US $5.71671

From: US $6.35190

Stock:5000

Minimum:1

Favorite

AD574AJN

Enlarge

Original parts, guaranteed brand new

AD574AJN

DIP-28

ADI

0521+

The AD7731 is a complete analog front-end for process control applications. The device has a proprietary programmable gain front end that allows it to accept a range of input signal ranges, including low level signals, directly from a transducer. The sigmadelta architecture of the part consists of an analog modulator and a low pass programmable digital filter, allowing adjustment of filter cutoff, output rate and settling time. The part features three buffered differential programmable gain analog inputs (which can be configured as five pseudo-differential inputs), as well as a differential reference input. The part operates from a single +5 V supply and accepts seven unipolar analog input ranges: 0 to +20 mV, +40 mV, +80 mV, +160 mV, +320 mV, +640 mV and +1.28 V, and seven bipolar ranges: ±20 mV, ±40 mV, ±80 mV, ±160 mV, ±320 mV, ±640 mV and ±1.28 V. The peak-to-peak resolution achievable directly from the part is 16 bits at an 800 Hz output rate. The part can switch between channels with 1 ms settling time and maintain a performance level of 13 bits of peak-to-peak resolution. The serial interface on the part can be configured for three-wire operation and is compatible with microcontrollers and digital signal processors. The AD7731 contains self-calibration and system calibration options and features an offset drift of less than 5 nV/°C and a gain drift of less than 2 ppm/°C. The part is available in a 24-lead plastic DIP, a 24-lead SOIC and 24-lead TSSOP package. Applications Process Control PLCs/DCS Industrial Instrumentation

Utsource Original Store

≥1:

US $21.37410

US $19.23669

≥5:

US $20.18665

US $18.16799

≥10:

US $19.59293

US $17.63363

≥20:

US $18.99920

US $17.09928

≥50:

US $18.40548

US $16.56493

≥100:

US $18.16799

US $16.35119

≥200:

US $17.81175

US $16.03058

≥500:

US $17.57426

US $15.81683

≥1000:

US $17.21803

US $15.49622

From: US $17.21803

Description: The AD574AJN is a precision 8-bit successive approximation analog-to-digital converter (ADC) with an on-chip track-and-hold amplifier. Features: 8-bit resolution On-chip track-and-hold

Stock:2000

Minimum:1

Favorite

AD7714YNZ

Enlarge

Used and refurbished parts guaranteed can work well

AD7714YNZ

24-DIP (0.300", 7.62mm)

Analog Devices

24 Bit Analog to Digital Converter 3, 5 Input 1 Sigma-Delta 24-PDIP

Utsource

≥1:

US $15.08760

US $13.57884

≥5:

US $14.24940

US $12.82446

≥10:

US $13.83030

US $12.44727

≥20:

US $13.41120

US $12.07008

≥50:

US $12.99210

US $11.69289

≥100:

US $12.82446

US $11.54201

≥200:

US $12.57300

US $11.31570

≥500:

US $12.40536

US $11.16482

≥1000:

US $12.15390

US $10.93851

From: US $12.15390

Stock:2000

Minimum:1

Favorite

LTC1605ISW#PBF

Enlarge

Original parts, guaranteed brand new

LTC1605ISW#PBF

SOP

Linear

13+

The AD7731 is a complete analog front-end for process control applications. The device has a proprietary programmable gain front end that allows it to accept a range of input signal ranges, including low level signals, directly from a transducer. The sigmadelta architecture of the part consists of an analog modulator and a low pass programmable digital filter, allowing adjustment of filter cutoff, output rate and settling time. The part features three buffered differential programmable gain analog inputs (which can be configured as five pseudo-differential inputs), as well as a differential reference input. The part operates from a single +5 V supply and accepts seven unipolar analog input ranges: 0 to +20 mV, +40 mV, +80 mV, +160 mV, +320 mV, +640 mV and +1.28 V, and seven bipolar ranges: ±20 mV, ±40 mV, ±80 mV, ±160 mV, ±320 mV, ±640 mV and ±1.28 V. The peak-to-peak resolution achievable directly from the part is 16 bits at an 800 Hz output rate. The part can switch between channels with 1 ms settling time and maintain a performance level of 13 bits of peak-to-peak resolution. The serial interface on the part can be configured for three-wire operation and is compatible with microcontrollers and digital signal processors. The AD7731 contains self-calibration and system calibration options and features an offset drift of less than 5 nV/°C and a gain drift of less than 2 ppm/°C. The part is available in a 24-lead plastic DIP, a 24-lead SOIC and 24-lead TSSOP package. Applications Process Control PLCs/DCS Industrial Instrumentation

Utsource Original Store

≥1:

US $26.78520

US $24.10668

≥2:

US $26.78520

US $24.10668

≥5:

US $25.89237

US $23.30313

≥10:

US $25.53523

US $22.98171

≥20:

US $25.35666

US $22.82099

≥30:

US $24.99952

US $22.49957

≥50:

US $24.99952

US $22.49957

≥100:

US $24.82096

US $22.33886

≥500:

US $24.64239

US $22.17815

From: US $24.64239

#PBF Description: The LTC1605ISW#PBF is a low power, low noise, rail-to-rail output, single-supply, CMOS operational amplifier. Features: - Low power: 1.3mA/amplifier - Low noise: 0.9nV/√Hz - Rail-t

Stock:2000

Minimum:1

Favorite

Alternate Text
Alternate Text

Currency:

Alternate Text Alternate Text Alternate Text

Product New Used

Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company

Alternate Text Stock

Non-Stock

Non-Stock

Toll-Free Call

(888) 766 5577 USA & Canada

+52 5515436027
+52 5515436028 Mexico

+49 6931090199 Germany

+55 21 3609 8727 Brazil

(800) 137235 Italy

(900) 649657 Spain

Whatsapp

+1 (312) 899-4831 USA

+49 15217848563 Germany

+52 55 7637 4368 Mexico

Email

sales@utsource.com

GLOBAL PAYMENTS

Global logistics

footShip
Copyright © 2022 Power by UTSOURCE INTERNATIONAL LIMITED ISO/IEC 20000-1:2011,ISO/IEC 27001:2013 鄂ICP备2021003526号-1