≥1:
US $0.68500
Buy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country CodeSearch results filter:
Home > Elec-component > IC Chips > Interface - Analog Switches, Multiplexers, Demultiplexers
SOT108
PH2
The 74HC4066D is a quad single pole single throw analogue switch in 14 pin SOIC package. This analogue switch features two input/output terminals (nY and nZ) and an active HIGH enable input (nE). When nE is LOW, the analogue switch is turned off. Inputs include clamp diodes. This enables use of current limiting resistors to interface inputs to voltages in excess of VCC.
The 74HC4066D,653 is a quad bilateral switch manufactured by NXP Semiconductors. It is a four-channel analog switch designed to handle analog signals up to 5.5V. Description: The 74HC4066D,653 is a q
Stock:10000
Minimum:4
Favorite
DIP-28
Analog Devices
06+
The ADG406, ADG407, and ADG426 are monolithic CMOS analog multiplexers. The ADG406 and ADG426 switch one of sixteen inputs to a common output as determined by the 4-bit binary address lines: A0, A1, A2, and A3. The ADG426 has on-chip address and control latches that facilitate microprocessor interfacing. The ADG407 switches one of eight differential inputs to a common differential output as determined by the 3-bit binary address lines A0, A1 and A2. An EN input on all devices is used to enable or disable the device. When disabled, all channels are switched off. The ADG406/ADG407/ADG426 are designed on an enhanced LC2MOS process that provides low power dissipation yet gives high switching speed and low on resistance. These features make the parts suitable for high speed data acquisition systems and audio signal switching. Low power dissipation makes the parts suitable for battery powered systems. Each channel conducts equally well in both directions when on and has an input signal range which extends to the supplies. In the off condition, signal levels up to the supplies are blocked. All channels exhibit break-before-make switching action preventing momentary shorting when switching channels. Inherent in the design is low charge injection for minimum transients when switching the digital inputs.
Description: The ADG406BNZ is a high-speed, low-voltage, CMOS quad SPST switch. Features: - Low voltage operation: 1.8 V to 5.5 V - Low on-resistance: RON = 10 Ω (max) - Low power consumption: ICC =
Stock:10000
Minimum:1
Favorite
SOT109
PH3
The HEF4051BT is an 8-channel Analog Multiplexer/Demultiplexer with three address inputs (S1 to S3), an active low enable input (E\), eight independent inputs/outputs (Y0 to Y7) and a common input/output (Z). The device contains eight bidirectional analog switches, each with one side connected to an independent input/output (Y0 to Y7) and the other side connected to a common input/output (Z). The analog inputs/outputs (Y0 to Y7 and Z) can swing between VDD as a positive limit and VEE as a negative limit. Unused inputs must be connected to VDD, VSS or another input. For operation as a digital multiplexer/demultiplexer, VEE is connected to VSS (typically ground).
Description: The HEF4051BT is a CMOS analog multiplexer/demultiplexer with low ON-resistance and low power consumption. Features: Low ON-resistance Low power consumption High speed switching High
Stock:10000
Minimum:3
Favorite
SOP-16
Analog Devices
08+
LC2MOS, ±15 V, 8 Channel High Performance Analog Multiplexer
Description: 8-Channel Multiplexer/Demultiplexer Features: Low On-Resistance: 8.5 Ω (Max) Low Off-Leakage Current: 0.1 nA (Max) Low On-Resistance Match Between Channels: 0.5 Ω (Max) Low Voltage Op
Stock:10000
Minimum:2
Favorite
SOIC-16
SIX
Multiplexer IC; Leaded Process Compatible:Yes; Peak Reflow Compatible 260 C:Yes RoHS Compliant: Yes
Description: The DG409DY-T1-E3 is a single-pole double-throw (SPDT) analog switch designed for use in analog signal routing applications. Features: Low On-Resistance: 0.4 Ω (max) Low Off-Leakage Cu
Stock:10000
Minimum:2
Favorite
SOP-16
PH3
Triple 2-channel analogue multiplexer/demultiplexer - Description: Triple 2-Channel Analog Multiplexer/Demultiplexer ; Logic switching levels: CMOS ; Number of pins: 16 ; Power dissipation considerations: Low Power or Automotive Applications ; Propagation delay: 5@15V ns; Voltage: 4.5-15.5 V; Package: SOT109-1 SO16; Container: Reel Pack, SMD, 13", CECC
Stock:10000
Minimum:12
Favorite
DIP-16
Vishay Siliconix
Multiplexer IC; Multiplexer Type:Analog; No. of Channels:8; Package/Case:16-DIP; IC Generic Number:408; Leaded Process Compatible:Yes; Leakage Current:1uA; On-Resistance, Rdson:100ohm; Mounting Type:Through Hole; No. of Pins:16 RoHS Compliant: Yes
Stock:10000
Minimum:1
Favorite
Description: Quad SPST CMOS Analog Switch Features: Low On Resistance: RON = 0.5 Ω (max) Low Power Consumption: 1.5 μA (max) Low Charge Injection: 10 pC (max) Low Crosstalk: –90 dB (max)
Stock:10000
Minimum:2
Favorite
Description: The DG403DJ-E3 is a quad SPST (single-pole single-throw) analog switch designed for use in applications requiring low on-resistance and low power consumption. Features: Low on-resistan
Stock:10000
Minimum:2
Favorite
Description: The MAX335CWG is a low-power, single-supply, 8-bit comparator with an open-drain output. Features: Low-power operation: 1.3μA (typ) Single-supply operation: 2.7V to 5.5V Open-drain out
Stock:10000
Minimum:1
Favorite
Stock:10000
Minimum:3
Favorite
SOP-16
Intersil
05+
Low-Voltage, Single and Dual Supply, 8 to 1 Multiplexer, Dual 4 to 1 Multiplexer and a Triple SPDT Analog Switches
The ISL84053IB is a low-voltage, low-power, single-supply, quad SPST analog switch manufactured by Intersil. It is available in a 16-pin SOP package. The switch features low on-resistance of 0.5Ω a
Stock:10000
Minimum:2
Favorite
Description: Dual 4-Channel Multiplexer/Demultiplexer Features: Low ON Resistance: 80 Ω (Typ) Low OFF Leakage Current: 0.1 μA (Max) Low Power Consumption: 5 μA (Max) High Speed: tpd = 8 ns (T
Stock:10000
Minimum:4
Favorite
The DG403DJ is a quad SPST CMOS analog switch manufactured by Harris. It is a 16-pin DIP package and is designed to switch analog signals up to 10V. The DG403DJ is designed to provide low on-resista
Stock:10000
Minimum:2
Favorite
SOP16
SIX
Analog Switch / Multiplexer Mux IC; Analog Switch Function:Analog Switch; Package/Case:16-SOIC; Leaded Process Compatible:Yes; On Resistance, Rdson:45ohm; Peak Reflow Compatible 260 C:Yes; Supply Voltage Max:12V RoHS Compliant: Yes
Description: Quad SPST CMOS Analog Switch Features: - Low On-Resistance: 0.5Ω (max) - Low Power Consumption: 0.5μA (max) - Low Charge Injection: 0.5pC (max) - Low Crosstalk: -75dB (max) -
Stock:10000
Minimum:2
Favorite
Package Type: SOP20 Manufacturer: MAX Description: The MAX333ACWP is a low-power, single-supply, dual comparator with an open-drain output. Features: Low-Power Consumption: 1.3 μA Max Low-Voltage
Stock:10000
Minimum:1
Favorite
DIP
Maxim Integrated
05+
Low-Voltage, High-Speed, Quad, SPST CMOS Analog Switches
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:2
Favorite
SOP16
Analog Devices
Circular Connector; MIL SPEC:MIL-DTL-38999 Series I; Body Material:Metal; Series:LJT; No. of Contacts:6; Connector Shell Size:17; Connecting Termination:Crimp; Circular Shell Style:Straight Plug; Body Style:Straight RoHS Compliant: No
Description: The ADG201AKR is a high-speed, low-power, quad CMOS analog multiplexer/switch. Features: Low On Resistance: 5 Ω (max) Low Off Leakage: 0.1 nA (max) Low Power Consumption: 0.5 mW
Stock:10000
Minimum:2
Favorite
DIP-16
Fsc/ns
Single 8-Channel Analog Multiplexer/Demultiplexer; Package: DIP; No of Pins: 16; Container: Rail
Description: CMOS 8-Channel Multiplexer/Demultiplexer Features: Low Off Isolation: 0.1 pF (Typ) Low On Resistance: 80 Ω (Typ) High Off Resistance: 10 MΩ (Typ) Low Power Consumption: 1 μA (Max) H
Stock:10000
Minimum:5
Favorite
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company