≥1:
US $1.09600
Buy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country CodeSearch results filter:
Home > Elec-component > IC Chips > Logic - Buffers, Drivers, Receivers, Transceivers
SOP-16
Texas Instruments
CD4502B consists of six inverter/buffers with 3-state outputs. A logic "1" on the OUTPUT DISABLE input produces a high-impedance state in all six outputs. This feature permits common busing of the outputs, thus simplifying system design. A Logic "1" on the INHIBIT input switches all six outputs to logic "0" if the OUTPUT DISABLE input is a logic "0". This device is capable of driving two standard TTL loads, which is equivalent to six times the JEDEC "B"-series IOL standard. The CD4502B types are supplied in 16-lead hermetic dual-in-line ceramic packages (F3A suffix), 16-lead dual-in-line plastic packages (E suffix), 16-lead small-outline packages (NSR suffix), and 16-lead thin shrink small-outline packages (PW and PWR suffixes).
Stock:10000
Minimum:3
Favorite
TSSOP-20
FSC
Octal Buffer/Line Driver with 3-STATE Outputs; Package: TSSOP; No of Pins: 20; Container: Tape & Reel
Description: Octal Buffer/Line Driver with 3-State Outputs Features: - Low power consumption - High speed operation - High noise immunity - Outputs source/sink 24 mA - Outputs can be wired ORed - ESD
Stock:10000
Minimum:5
Favorite
SOP-20
Texas Instruments
Transceiver, Non-Inverting 1 Element 8 Bit per Element Push-Pull Output 20-SOIC
Description: The SN74HCT245DWRE4 is a high-speed octal bus transceiver with 3-state outputs. Features: High-speed operation: tpd = 8.0 ns (typical) Low power consumption: ICC = 4 μA (max) Outputs
Stock:10000
Minimum:3
Favorite
Stock:10000
Minimum:3
Favorite
DIP-20
Texas Instruments
OCTAL BUFFERS AND LINE DRIVERS WITH OPEN-COLLECTOR OUTPUTS
Description: The SN74AS760N is a 20-pin DIP (dual in-line package) device from Texas Instruments (TI). It is a high-speed, low-power, quad 2-input multiplexer with 3-state outputs. Features: * Low po
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:4
Favorite
SOP14
FSC
Quad Buffer with 3-STATE Outputs; Package: SOIC; No of Pins: 14; Container: Rail
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:2
Favorite
SOP-20
FSC
0815+
Octal 3-STATE Buffer; Package: SOP; No of Pins: 20; Container: Tape & Reel
Description: The MM74HC244SJX is a high-speed Si-gate CMOS device that is designed to provide high-speed logic operations. It is a triple 8-bit buffer/line driver with 3-state outputs. Features: Hi
Stock:10000
Minimum:2
Favorite
SSOP-56
FSC
Non-Inverting Line Driver with 3-STATE Outputs; Package: SSOP; No of Pins: 56; Container: Rail
Stock:5000
Minimum:1
Favorite
TSSOP-14
Texas Instruments
Buffer, Non-Inverting 4 Element 1 Bit per Element Push-Pull Output 14-TSSOP
Description: The SN74LV4T125PWR is a low-voltage Quad Bus Buffer Gate with 3-state outputs in a 14-pin TSSOP package. Features: Low-voltage operation: 1.65 V to 3.6 V Low power consumption Outputs
Stock:10000
Minimum:3
Favorite
DIP-14
NXP Usa
Buffer, Non-Inverting 4 Element 1 Bit per Element Push-Pull Output 14-DIP
Description: The 74HC125N is a high-speed Si-gate CMOS device and is pin compatible with low power Schottky TTL (LSTTL). Features: High speed: tpd = 8.5 ns (typ.) at VCC = 5 V Low power dissipation
Stock:10000
Minimum:2
Favorite
SOP-20
Texas Instruments
07/
Octal Buffers/Drivers With 3-State Outputs 20-SOIC -40 to 85
Description: The SN74ABT244ADWRG4 is a high-speed octal buffer/line driver with 3-state outputs. Features: High-speed operation Outputs source/sink 24 mA Outputs can be wired-ANDed Outputs can b
Stock:10000
Minimum:3
Favorite
DIP-20
STM
OCTAL BUS BUFFER WITH 3 STATE OUTPUTS HC540: INVERTED - HC541 NON INVERTED
Description: The M74HC541B1R is a high-speed CMOS 8-bit buffer/line driver with 3-state outputs. Features: - High-speed operation: tpd = 8.0 ns (typical) at VCC = 5 V - Low power dissipation: ICC = 4
Stock:10000
Minimum:2
Favorite
SSOP-48
Texas Instruments
74ACT Family, Buffer/Driver, Texas Instruments Advanced CMOS Logic Operating Voltage: 4.5 to 5.5 Compatibility: Input TTL, Output CMOS
Stock:10000
Minimum:1
Favorite
TSSOP20
Texas Instruments
Buffer, Inverting 2 Element 4 Bit per Element Push-Pull Output 20-TSSOP
Description: The SN74HCT240PW is an octal buffer/line driver with 3-state outputs from Texas Instruments. Features: - High-speed operation: tpd = 8 ns (typical) - Low power consumption: ICC = 4 μA (m
Stock:10000
Minimum:2
Favorite
Description: The 74AC245MTC is a high-speed octal bus transceiver with 3-state outputs. It is designed to provide bidirectional level translation between two buses. Features: - High-speed performance
Stock:10000
Minimum:3
Favorite
SOT-353
Nexperia Usa
The 74LVC1G126GW is a non-inverting Buffer/Line Driver with 3-state output. The 3-state output is controlled by the output enable input (OE). A Low-level at pin OE causes the output to assume a high-impedance OFF-state. The input can be driven from either 3.3/5V devices. This feature allows the use of this device in a mixed 3.3 and 5V environment. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down.
Description: The 74LVC1G126GW,125 is a single-pole single-throw (SPST) analog switch. It is a low-voltage CMOS device that operates from a single 1.65V to 3.6V supply. Features: Low-voltage oper
Stock:10000
Minimum:5
Favorite
Stock:10000
Minimum:4
Favorite
SN74ACT245NS is a octal bus transceiver with 3-state outputs from Texas Instruments. It is a 20-pin small-outline package (SOP20). Description: The SN74ACT245NS is an octal bus transceiver with 3-sta
Stock:10000
Minimum:4
Favorite
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company