≥1:
US $0.85080
Buy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country CodeSearch results filter:
SOP-20
FSC
04+
The MM74HC573 high speed octal D-type latches utilize advanced silicon-gate P-well CMOS technology. They possess the high noise immunity and low power consumption of standard CMOS integrated circuits, as well as the ability to drive 15 LS-TTL loads. Due to the large output drive capability and the 3-STATE feature, these devices are ideally suited for interfacing with bus lines in a bus organized system. When the LATCH ENABLE(LE) input is HIGH, the Q outputs will follow the D inputs. When the LATCH ENABLE goes LOW, data at the D inputs will be retained at the outputs until LATCH ENABLE returns HIGH again. When a HIGH logic level is applied to the OUTPUT CONTROL OC input, all outputs go to a HIGH impedance state, regardless of what signals are present at the other inputs and the state of the storage elements. The 74HC logic family is speed, function and pinout compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.
Description: The MM74HC573WM is a high-speed CMOS 8-bit register fabricated with silicon gate C2MOS technology. Features: High-speed operation Low power dissipation Low input current High noise im
Stock:10000
Minimum:3
Favorite
SOP20
Texas Instruments
02+
OCTAL TRANSPARENT D-TYPE LATCHES WITH 3-STATE OUTPUTS
Stock:10000
Minimum:3
Favorite
Stock:10000
Minimum:1
Favorite
SOP20
Texas Instruments
The TPIC6273DW is a monolithic high-voltage high-current power logic octal D Latch with DMOS transistor outputs designed for use in systems that require relatively high load power. The device contains a built-in voltage clamp on the outputs for inductive transient protection. Power driver applications include relays, solenoids and other medium-current or high-voltage loads. The TPIC6273 contains eight positive-edge-triggered D-type flip-flops with a direct clear input. Each flip-flop features an open-drain power DMOS transistor output. When clear (CLR\) is high, information at the D inputs meeting the setup time requirements is transferred to the DRAIN outputs on the positive-going edge of the clock pulse. clock triggering occurs at a particular voltage level and is not directly related to the transition time of the positive-going pulse. When the clock input (CLK) is at either the high or low level, the D input signal has no effect at the output.
Stock:5000
Minimum:1
Favorite
Description: The SN74F573N is a 20-pin DIP (dual in-line package) from Texas Instruments. It is a 5-V CMOS Octal D-Type Flip-Flop with 3-State Outputs. Features: High-Voltage Type (20V Rating) Outp
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:2
Favorite
Description: The DM74S373N is a high-speed, low-power, advanced 4-bit static RAM. Features: - High-speed access time of 10 ns - Low power consumption - Advanced 4-bit static RAM - TTL compatible inpu
Stock:10000
Minimum:2
Favorite
DIP-16
National Semiconductor
CABLE ASSEMBLY; LEAD-FREE SOLDER; SMA MALE TO SMA MALE RIGHT ANGLE; 50 OHM, RG188A/U COAX
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:1
Favorite
DIP-20
National Semiconductor
Octal Transparent Latch with 3-STATE Outputs; Package: DIP; No of Pins: 20; Container: Rail
Description: Octal D-Type Flip-Flop with 3-State Outputs Features: High-Speed Operation: tPD = 10 ns (typical) at VCC = 5.0 V Low Power Consumption: ICC = 4 μA (maximum) at TA = 25°C Outputs S
Stock:10000
Minimum:2
Favorite
The DM74LS259N is a 16-pin DIP (dual in-line package) integrated circuit (IC) manufactured by National Semiconductor. It is a programmable 8-bit addressable latch with three-state outputs. Features:
Stock:10000
Minimum:2
Favorite
Description: The 74ACT841SCX is a high-speed octal buffer/line driver with 3-state outputs. Features: High-Speed Performance: tPD = 4.5 ns (typical) at VCC = 5.0 V Outputs Source/Sink 24 mA
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:3
Favorite
SOP-20
FSC
07+
Octal D-Type Latch with 3-STATE Outputs; Package: SOIC-Wide; No of Pins: 20; Container: Rail
Description: The 74VHCT573AM is a high-speed CMOS logic octal D-type flip-flop with 3-state outputs. Features: High-speed CMOS logic Octal D-type flip-flop 3-state outputs Low power consumption
Stock:10000
Minimum:2
Favorite
DIP-20
Texas Instruments
OCTAL D-TYPE TRANSPARENT LATCHES AND EDGE-TRIGGERED FLIP-FLOPS
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:2
Favorite
Description: The CD4099BE is a quad 2-input exclusive-OR gate integrated circuit manufactured by Texas Instruments. Features: Four independent 2-input exclusive-OR gates Inputs accept voltages
Stock:10000
Minimum:3
Favorite
Description: Quad 2-Input Positive-NAND Gates Features: Inputs Include Clamp Diodes Outputs Source/Sink 24 mA Fanout of 10 LSTTL Loads Low Power Consumption, 80 mW Typ High Noise Immunity C
Stock:10000
Minimum:2
Favorite
Description: The 74ACT16373DLR is a 16-bit D-type flip-flop with 3-state outputs from Texas Instruments. Features: - High-speed performance: tPD = 8.5 ns (typ) - Low power consumption: ICC = 4.0 μA (
Stock:10000
Minimum:2
Favorite
SOP20
Ns/fsc
97+
3-STATE Octal D-Type Transparent Latches and Edge-Triggered Flip-Flops
Stock:10000
Minimum:4
Favorite
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company