≥1:
€3.34916
Ciao! Accesso O Registra immediatamente
APP Libretto dei dati Trasmissione in diretta 290K likes UtsourceAcquista(0)
Richiesta di prezzo (0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Aggiungi l'indirizzo
Nuovo indirizzo di spedizione
* Si prega di inserire correttamente il numero di cellulare per assicurarsi di poter ricevere le informazioni di tracciamento in tempo.
Codice paeseRisultati del filtro di ricerca:
Home page > Componenti Elettronici > Chip circuito integrato > PMIC - Gestione termica
SSOP16
Analog Devices
Circular Connector; No. of Contacts:32; Series:LJT07R; Body Material:Aluminum; Connecting Termination:Crimp; Connector Shell Size:19; Circular Contact Gender:Socket; Circular Shell Style:Jam Nut Receptacle; Insert Arrangement:19-32
Stock:10000
Minimo:1
Preferito
Stock:10
Minimo:10
Preferito
Stock:1000
Minimo:10
Preferito
Stock:2000
Minimo:1
Preferito
DIP-14
Analog Devices
90+
Monolithic Thermocouple Amplifiers with Cold Junction Compensation
The AD595CQ is a thermocouple cold junction compensator (CJC) from Analog Devices. It is a monolithic integrated circuit that provides a temperature-compensated voltage output proportional to the temp
Stock:2000
Minimo:1
Preferito
Stock:35
Minimo:10
Preferito
CDIP-14
Analog Devices
96+
Monolithic Thermocouple Amplifiers with Cold Junction Compensation
The AD595AQ is a monolithic integrated circuit temperature transducer manufactured by Analog Devices. It is a complete thermocouple-to-digital converter that provides a linear output voltage proportio
Stock:2000
Minimo:1
Preferito
TO-100
Analog Devices
AD595...AD597 Thermocouple Amplifiers, Analog Devices The AD594/595/596/597 series of type J/K thermocouple amplifiers are a combination of an instrumentation amplifier and thermocouple cold junction compensator roviding an output of 10mV/°C. AD594 for type J thermocouples, optimised operating temperature range 0°C to 50°C AD595 for type K thermocouples, optimised operating temperature range 0°C to 50°C AD596 for type J thermocouples, optimised operating temperature range 25°C to 100°C AD597 for type K thermocouples, optimised operating temperature range 25°C to 100°C All versions have a measurement range equal to the full range of the relevant thermocouple type.
Stock:5000
Minimo:1
Preferito
Stock:10
Minimo:10
Preferito
Stock:130
Minimo:10
Preferito
DIP-14
Analog Devices
N/A
Monolithic Thermocouple Amplifiers with Cold Junction Compensation
The AD594AQ is a precision integrated circuit temperature transducer from Analog Devices Inc. It is a monolithic, 14-pin DIP packaged IC which utilizes a band-gap junction to provide a precisely scale
Stock:5000
Minimo:1
Preferito
Stock:20
Minimo:10
Preferito
The AD595AQ is a monolithic integrated circuit temperature transducer manufactured by Analog Devices. It is a complete thermocouple-to-digital converter that provides a linearized output in the form o
Stock:2000
Minimo:1
Preferito
Preferito
Description: Temperature Sensor and Fan-Speed Controller Features: Monitors and Controls Up to Three Fans Fan-Speed Control Outputs Programmable Temperature Hysteresis Programmable Tempera
Stock:10000
Minimo:2
Preferito
Preferito
Stock:10
Minimo:10
Preferito
Stock:20
Minimo:10
Preferito
DIP-14
ADI
2011+
The AD594/AD595 is a complete instrumentation amplifier and thermocouple cold junction compensator on a monolithic chip. It combines an ice point reference with a precalibrated amplifier to produce a high level (10 mV/°C) output directly from a thermocouple signal. Pin-strapping options allow it to be used as a linear amplifier-compensator or as a switched output setpoint controller using either fixed or remote setpoint control. It can be used to amplify its compensation voltage directly, thereby converting it to a stand-alone Celsius transducer with a low impedance voltage output. The AD594/AD595 includes a thermocouple failure alarm that indicates if one or both thermocouple leads become open. The alarm output has a flexible format which includes TTL drive capability. The AD594/AD595 can be powered from a single ended supply (including +5 V) and by including a negative supply, temperatures below 0°C can be measured. To minimize self-heating, an unloaded AD594/AD595 will typically operate with a total supply current 160 μA, but is also capable of delivering in excess of ±5 mA to a load. The AD594 is precalibrated by laser wafer trimming to match the characteristic of type J (iron-constantan) thermocouples and the AD595 is laser trimmed for type K (chromel-alumel) inputs. The temperature transducer voltages and gain control resistors are available at the package pins so that the circuit can be recalibrated for the thermocouple types by the addition of two or three resistors. These terminals also allow more precise calibration for both thermocouple and thermometer applications. The AD594/AD595 is available in two performance grades. The C and the A versions have calibration accuracies of ±1°C and ±3°C, respectively. Both are designed to be used from 0°C to +50°C, and are available in 14-pin, hermetically sealed, side-brazed ceramic DIPs as well as low cost cerdip packages.
Description: The AD595CDZ is a thermocouple cold junction compensator (CJC) with a linearized output. It is designed to provide a linear output voltage proportional to the temperature of a thermocoupl
Stock:2000
Minimo:1
Preferito
DIP-14
Analog Devices
N/A
Monolithic Thermocouple Amplifiers with Cold Junction Compensation
The AD595AD is a monolithic integrated circuit temperature transducer. It converts a temperature input into an output current proportional to the temperature. It is designed to operate with thermocoup
Stock:2000
Minimo:1
Preferito
Ferma gli esperti di produzione, siamo in grado di fornire un gran numero di componenti elettronici che sono stati interrotti e che sono difficili da trovare, per facilitare la società di manutenzione