LB1641

5962-8963001EA : DS78C120 - Dual CMOS Compatible Differential Line Receiver, Package: Cerdip, Pin Nb=16.

AM26S10 : Quadruple Bus Transceivers. Schottky Circuitry for High Speed, Typical Propagation Delay Time. 12 ns Drivers Feature Open-Collector Outputs for Party-Line (Data Bus) Operation Driver Outputs Can Sink 0.8 V Maximum pnp Inputs for Minimal Input Loading Designed to Be Interchangeable With Advanced Micro Devices AM26S10 The is a quadruple bus transceiver utilizing Schottky-diode-clamped.

CLC014 : Serial Digital Interface. CLC014 - Adaptive Cable Equalizer For High-speed Data Recovery, Package: Soic Narrow, Pin Nb=14.

HIP2100 : 100V/2A Peak, Low Cost, High Frequency Half Bridge Driver. 100V/2A Peak, Low Cost, High Frequency Half Bridge Driver The is a high frequency, 100V Half Bridge N-Channel power MOSFET driver IC available in both 8 lead SOIC and 16 lead QFN plastic packages. The low-side and high-side gate drivers are independently controlled and matched to 8ns. This gives the user maximum flexibility in dead-time selection and driver.

ISL38601M-CD : Isl38601m Prism GT Minipci Ieee 802.11g, 802.11b Wlan Nic. The Intersil ISL38601M WLAN NIC (Note is a complete wireless high speed Network Interface Card (NIC). utilizing the Intersil PRISM GT chip set. The is a lower cost alternative to the ISL38000M radio and the ISL38001M radio. It offers improved range compared to the ISL38000M while providing equivalent performance in other categories. It conforms to the IEEE.

LX5107 : Terminator. 9-line Low Capacitance, Upower Scsi Terminator. The is a nine-line active terminator for the SCSI parallel bus. This SCSI standard recommends active termination at both ends of the SCSI bus. During disconnect mode, the LX5107 requires a meager 30µA of supply current while offering only 3.0pF of output capacitance. To enter this low-power mode, the disconnect pin should be driven low thereby disconnecting.

MIC2537 : MIC2537 Quad Usb Bus-powered Peripheral Switch. Quad Power Distribution Switch Final Information The is a cost-effective high-side power switch with four independently controlled channels, optimized for buspowered Universal Serial Bus (USB) applications. Few external components are necessary to satisfy USB requirements. The MIC2537 satisfies the following USB requirements: each switch channel supplies.

PC87366 : 128-pin LPC Superi/o With System Hardware Monitoring, Midi And Game Ports.

PC97338 : Acpi 1.0 And Pc98/99 Compliant Superi/o. The is a fully ACPI 1.0 and PC98/99 compliant, ISA based Super I/O. It is functionally compatible with the PC87338. It includes a Floppy Disk Controller (FDC), two Serial Communication Controllers (SCC) for UART and Infrared support, one IEEE1284 compatible Parallel Port, and two general purpose Chip Select signals for game port support. The device.

PCI6152 : PCI-to-PCI Bridges. (HB1-SE66 Xx) -- The Pci 6152-CC66BC is a 32-bit 66MHz High Performance Pci-to-pci Bridge With Low Power Dissipation And a Small Footprint. It Supports up to Four Secondary Pci Master Devices, is Pci 2.2 Compliant And Compact Pci Hot Swap Friendly. In Addition it Offers Four Gpio Pins And Includes Performance-optimized Retry Architecture..

SCAN928028 : SCAN LVDS Circuits. SCAN928028 - 8 Channel 10:1 Serializer With Ieee 1149.1 And At-speed Bist, Package: Lbga, Pin Nb=196.

SN65076B : Differential Bus Transceivers. Bidirectional Transceiver Designed for Multipoint Transmission in Noisy Environments Such as Automotive Applications 3-State Driver and Receiver Outputs Individual Driver and Receiver Enables Wide Positive and Negative Input/Output Bus Voltage Ranges Driver Output Capability. 10 mA Max Thermal Shutdown Protection Driver Positive and Negative Current.

SN65LVDS33 : . 400-Mbps Signaling Rate1 and 200-Mxfr/s Data Transfer Rate Operates With a Single 3.3-V Supply to 5-V Common-Mode Input Voltage Range Differential Input Thresholds <±50 mV With mV of Hysteresis Over Entire Common-Mode Input Voltage Range Integrated 110- Line Termination Resistors On LVDT Products TSSOP Packaging (33 Only) Complies With TIA/EIA-644.

SN75112D : Non-Standard Line Circuits. ti SN75112, Dual Line Driver. Improved Stability Over Supply Voltage and Temperature Ranges Constant-Current Outputs High Speed Standard Supply Voltages High Output Impedance High Common-Mode Output Voltage Range. 10 V TTL-Input Compatibility Inhibitor Available for Driver Selection Glitch Free During Power Up/Power Down SN75112 and External Circuit Meets or Exceeds the Requirements.

SN75LP185A : Transceiver. Low-power Multiple Rs-232 Drivers And Receivers. Single-Chip TIA/EIA-232-F Interface for IBMTM PC/ATTM Serial Port Designed to Transmit and Receive 4-µs Pulses (Equivalent to 256 kbit/s) Less Than 21-mW Power Consumption Wide Supply-Voltage Range, 15 V Driver Output Slew Rates Are Internally Controlled to 30 V/µs Max Receiver Input Hysteresis, 1000 mV Typ TIA/EIA-232-F Bus-Pin ESD Protection Exceeds:.

SP200 : Transceivers. No. Of TX = 5 ;; No. Of RX = 0 ;; Data Rate (kbps) = 120 ;; Supply Voltage (V) = 5 ;; Typ. Icc Current (mA) = 4 ;; Int. Chrg. Pump = • ;; No. Of Ext. Caps = 4 ;; Nom Cap. Value (µF) = 0.10 ;; = ;; = • ;; = ;; = › Charge Pump Caps CAN Range From .1 to 10 µF ;; Package = 20-Pin Pdip 20-Pin Soic.

SP333 : Multi-protocol Transceivers. No. Of TX = 3 ;; No. Of RX = 5 ;; Data Rate (Mbps) = 5 ;; Supply Voltage (V) = 5 ;; Typ. Icc Current (mA) = 15(no Load) ;; Int. Chrg. Pump = Yes ;; Supported Protocols = RS232, Appletalk ;; Tri-state Ability Dte/dce = 3Tx/3Rx ;; = › Appletalk ;; Esd (HBM) = 2KV ;; Package = 28 Pin Soic.

TB5R2D : ti TB5R2, Quad Pecl Line Receiver. BRF2A, BRS2A, and BRS2B Pin Equivalent to General Trade 26LS32 High Input Impedance Approximately k 4-ns Maximum Propagation Delay TB5R1 Provides 50-mV Hysteresis TB5R2 With -125-mV Threshold Offset for Preferred State Output 7.1 V Common Mode Range Single 5-V ±10% Supply Slew Rate Limited (1 ns min 20%) TB5R2 Output Defaults to Logic 1 When Inputs.

ISO3088 : Isolated 5-V Full & Half-Duplex RS-485 Transceivers The ISO3080, and ISO3086 are isolated full-duplex differential line drivers and receivers while the ISO3082, and ISO3088 are isolated half-duplex differential line transceivers for TIA/EIA 485/422 applications. These devices are ideal for long transmission lines since the ground loop is broken to allow.