Declaration: The output power of the module is not only affected by the load capacity of the module, but also affected by various factors such as the front power supply and the rear load. The following data are measured by professional equipment without considering other factors. The power module is a kind of electronic components, please buy it carefully without electronic professional knowledge.
Module parameters
Module property: Non-isolated booster module
Module size: length 65MM* height 23MM*(width 56.5mm including heat sink)
Input mode: IN+ input positive stage, IN- input negative pole
Output mode: OUT+ output positive stage, OUT- output negative pole
Connection: no welding, terminal
Input voltage: 10-32V
Output voltage :(1) continuously adjustable (12-35v) the store's default delivery voltage is 19V
(2) Fixed output (optional between 12-35V). Please tell the shopkeeper when you buy.
Output current: 6A(MAX)
Input current: 10A(MAX) (more than 10A, please strengthen the heat dissipation)
Output power: natural cooling 100W (MAX), fan 150W (MAX)
Easily drive 65W 90W laptop including dual core
The temperature of the laptop module with 12V battery and ordinary 19V 3.42a is about 45 degrees
Conversion efficiency: 94% (measured when 16V input and 19V 2.5a output) (for reference only)
Working temperature: industrial grade (-40 ° C to +85 ° C) (If the ambient temperature exceeds 40 ° C, please reduce the power, or add a fan)
Full load temperature rise: 45℃
No load current: typical 25mA
Short circuit protection: none (please add an overcurrent protector to the input)
Input reverse protection: none, in series diode in input
Range of application
1) DIY an output adjustable on-board power supply. You only need to connect your 12V power supply in the input, and you can adjust the output voltage freely and continuously (14-35V), but the output voltage should not be lower than the input voltage.
2) Universal on-board notebook power supply. The input is connected to your 12V power supply, and the output can be adjusted to the voltage of your laptop.
3) Booster charger, you can use 12V power to charge the battery higher than 12V, such as 24V battery.
4) Power your electronic devices, as long as the voltage is adjusted to the voltage you need and the current does not exceed the rated current, it can work normally.
Grade 5) before the system power supply, input when you doing a project for 10 to 18 v, and your system board and will need about 24 v power supply and the power is large, using ordinary DC - DC module power is too small, that you choose this module we will be your best choice, can get a job, don't need to debug direct easily achieve efficient high-power booster.
Required
