Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ アドレスの追加
新運送先
*追跡情報を時間内に受信できるように、携帯電話番号を正しく入力してください。
国コード
お気に入り
Utsource certified used parts
Utsource認定済みの中古部品は、次の保証を提供します。
1. Utsourceは、外観検査(外観に深刻な損傷がない)を含む商品を検査し、資格のある正直なサプライヤーを選択し、98%の資格率を保証します。
2.一部の部品は機械でテストされています。
3. Utsource認定部品は、60日以内であれば無条件で返品および返金できます。
製品の説明
SmartSocket 256k
このサイトで使用されているすべての製品名、商標、ブランド、ロゴは、それぞれの所有者の財産です。 これらの名前、商標、ブランド、およびロゴを使用した製品の描写、説明、または販売は、識別のみを目的としており、権利所有者との提携または許可を示すことを意図したものではありません。
Description
The DS1213C SmartSocket is a 28-pin, 600 mil DIP socket with a built-in CMOS controller circuit and an embedded lithium energy source. It accepts a 32K x 8 JEDEC bytewide CMOS static RAM. When the socket is mated with a CMOS RAM, it provides a complete solution o problems associated with memory volatility. The SmartSocket monitors incoming VCC for an out-of- tolerance condition. When such a condition occurs, the internal lithium energy source is automatically switched on and write protection is unconditionally enabled to prevent data corruption.
Using the SmartSocket saves printed circuit board space since the SRAM/SmartSocket combination occupies no more area than the memory alone. The SmartSocket uses only Pins 20 and 28 for RAM control. All other pins are passed straight through. See the DS1213B SmartSocket data sheet for technical details.
DS1213C description
The DS1213C SmartSocket is a 28-pin, 600mil dual in-line package socket with a built-in Complementary Metal Oxide Semiconductor (CMOS) controller circuit and an embedded lithium energy source which is manufactured by Maxim integrated company. It allows a 32k x 8 JEDEC byte wide CMOS static RAM. When the socket DSC1213C is mated with a CMOS RAM, it provides a comprehensive solution of problems associated with memory volatility. This device monitors the incoming Vcc for an out-of-tolerance condition. When a condition like that happens, the internal lithium energy source is automatically going to the switching ON condition and write protection is unconditionally enabled to avoid the corruption of data.
DS1213C Pin Configuration
When we are using the DSC1213C SmartSocket, it saves the space in the printed circuit board since the SRAM/SmartSocket combination inhabits no more area than the memory alone. The DSC123C SmartSocket takes only Pins 20 and 28 for the controlling of RAM. All the other remaining pins are passed straight through.
DS1213C Features
Some of the key features of this device are given below.
· Standard 32k x 8 CMOS static RAMs are accepted.
· Embedded lithium energy cell which will keep RAM data
· Self-contained circuitry which safeguards the data
· With the proper RAM selection data retention time will be greater than 10 years.
· Fully optimized gas-tight socket contacts
· Operating temperature range 0℃ to 70℃
Function of DS1213C
The SmartSocket DS1213C performs five circuit functions necessary for implementing battery backup on a CMOS memory. The first function is the device has a switch that is provided to direct power from the battery or Vcc supply, depending on which is greater. This switch has a voltage drop which will not exceed 0.2V. The second function is power fail detection at input voltages less than 4.75V.DS1213C constantly monitors the Vcc supply. When Vcc falls below 4.75V, a precision comparator detects the condition and inhibits the enabling of the RAM chip.
The third function accomplishes write protection by holding the chip enable signal to the memory to within 0.2V of Vcc or battery supply. If the chip enables signal is active at the time power fail detection occurs, write protection is delayed until after the memory cycle is complete to avoid corruption of data. During nominal power supply conditions, the memory chip enables signal will be passed through to the socket receptacle with a maximum propagation delay of 20 nanoseconds.
The SmartSocket’s fourth function is to check battery status and warn of potential data loss. Each time that Vcc power is restored to the SmartSocket, the battery voltage is compared with a precision comparator. If the battery supply is below 2.0V, the second memory cycle is inhibited. Battery status can therefore be determined by performing a read cycle after powerup to any location in the memory recording the contents of that memory location. A subsequent write cycle can then be executed to the same memory location changing the data. If the next read cycle fails to verify the written data, the contents of the memory are questionable because the battery may not have retained it.
The fifth function is battery redundancy. In many applications data integrity is paramount. The DS1213C has internal batteries. During the battery backup time the battery with the highest voltage is selected for use. If one battery dies, the other automatically takes over. The switch between batteries is transparent to the user. A battery status warning occurs only if both batteries are less than 2.0V. Each of the two lithium cells contains 35mA per hour capacity.
DS1213C Applications
The DS1213C SmartSocket is outdated now, this can be replaced mostly using a pin-compatible, equivalent-density 5V NV SRAM DS1230 module. Below are some of its applications.
· Motor vehicle crash boxes
· Data logging applications
· Some medical equipment’s and high-end servers which needs to store data
5V NV SRAMDS1230 Which replaces DS1213C
データシートの最初の 3 ページのプレビュー
同じメーカーの部品番号
同じカテゴリ
Japan からの 44 件のバイヤーレビュー
Kenneth Harris
Length of registration:7 years
I recently tested the Utsource DS1213C integrated circuit and was very pleased with the results. The circuit was easy to install and worked flawlessly. The circuit was well designed and provided reliable performance. I was also impressed with the quality of the components and the overall build quality of the circuit. I would highly recommend this product to anyone looking for a reliable and cost-e
0
0
もとに戻す0
03/17/2023
欧州決済方法
アジア決済方法
アメリカア決済方法
国際決済方法
注文
支払い
送料
ギフトクーポン/プラスサービス
戻る
返品は通常、荷物の配達日から60日以内に完了すると受け付けられます。
欠陥(不適合製品の第三者品質報告書を提供してください)
返送料金は前払いする必要があります。 代金引換貨物は受け付けません。
保証ポリシー
すべてのUTSOURCEの購入には、60日間の返金返品ポリシーに加えて、製造上の欠陥に対する90日間のUTSOURCE保証があります。この保証は、不適切な顧客の組み立て、顧客による指示に従わないこと、製品の変更によって欠陥が生じたアイテムには適用されません。 、過失または不適切な操作。
DS1213C
DS1213Cには世界中にいくつかのブランドがあり、地域の違いや買収によりDS1213Cの別名が付けられる場合があります。 DS1213Cは次の名前でも知られています。
購入オプション
在庫状態: 5000
最小数量: 1
合計額:
単価:1845
UTSOURCE
国:
United States
速達:(FEDEX, UPS, DHL, TNT)¥28405以上のご注文で、最初の0.5kg配送料無料。超過分は別途請求。
Judy顧客管理者
sales@utsource.com
(888) 766 5577
+86 15302769052
+1 (312)899-4831
(whatsapp only)
いつでも最高のサービスを提供する、専用のカスタマーサービス。
3 セラーの選択
生産の専門家を停止し、生産を停止し、見つけるのが難しい多数の電子部品を提供し、メンテナンス会社を促進することができます
Reply to
submit