≥1:
Mex $102.76329
Comprar(0)
Pide Su Cotización(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Añadir dirección
Nueva dirección de transporte
* Por favor, complete el número de teléfono celular correctamente para asegurarse de que puede recibir la información de seguimiento a tiempo.
Código de paísFiltro de resultados de busqueda:
Inicio > Componentes Electrónicos > Chips IC > Logico-Traductores, cambiadores de nivel.
Depósito:33951
Mínimo:1
Favorita
Depósito:33951
Mínimo:1
Favorita
Depósito:33951
Mínimo:2
Favorita
TSSOP-24
Texas Instruments
10+
This 8-bit noninverting bus transceiver uses two separate configurable power-supply rails. The SN74AVC8T245 is optimized to operate with VCCA/VCCB set at 1.4 V to 3.6 V. The device is operational with VCCA/VCCB as low as 1.2 V. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.2 V to 3.6 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, and 3.3-V voltage nodes. The SN74AVC8T245 is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the outputs so the buses are effectively isolated. The SN74AVC8T245 is designed so that the control pins (DIR and OE) are supplied by VCCA. The SN74AVC8T245 solution is compatible with a single-supply system and can be replaced later with a ’245 function, with minimal printed circuit board redesign. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, thus preventing damaging current backflow through the device when it is powered down. The VCC isolation feature ensures that if either VCC input is at GND, both ports are in the high-impedance state. To ensure the high-impedance state during power up or power down, OE shall be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Depósito:10000
Mínimo:5
Favorita
Depósito:33951
Mínimo:7
Favorita
Depósito:10000
Mínimo:3
Favorita
VSOP-8
Texas Instruments
2012PB
2-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR WITH AUTO DIRECTION SENSING AND ±15-kV ESD PROTECTION
Depósito:50
Mínimo:1
Favorita
Depósito:10000
Mínimo:1
Favorita
Depósito:9999
Mínimo:1
Favorita
Depósito:10000
Mínimo:2
Favorita
Depósito:10000
Mínimo:1
Favorita
Depósito:33951
Mínimo:2
Favorita
Depósito:33951
Mínimo:3
Favorita
Depósito:33951
Mínimo:2
Favorita
Depósito:33951
Mínimo:2
Favorita
Depósito:33951
Mínimo:4
Favorita
Depósito:10000
Mínimo:5
Favorita
Depósito:10000
Mínimo:3
Favorita
Detener a los expertos en producción, podemos proporcionar una gran cantidad de componentes electrónicos que se han detenido y que son difíciles de encontrar para facilitar la empresa de mantenimiento.