¡Hola! Acceder o Registrarse
APP Manual de datos Transmisión en vivo 290K likes UtsourceComprar(0)
Pida su cotización(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Añadir dirección
Nueva dirección de transporte
* Por favor, complete el número de teléfono celular correctamente para asegurarse de que puede recibir la información de seguimiento a tiempo.
Código de país
Favorita
Utsource certified used parts
Las piezas usadas certificadas por Utsource ofrecen las siguientes garantías:
1. Utsource inspeccionará los productos, incluida la inspección de apariencia (sin daños serios en la apariencia), seleccionará proveedores calificados y honestos, y asegurará una tasa de calificación del 98%.
2. Algunas partes son probadas por la máquina.
3. Las piezas certificadas de Utsource pueden devolverse y reembolsarse incondicionalmente dentro de los 60 días.
Descripción de producto
This 8-bit noninverting bus transceiver uses two separate configurable power-supply rails. The SN74AVC8T245 is optimized to operate with VCCA/VCCB set at 1.4 V to 3.6 V. The device is operational with VCCA/VCCB as low as 1.2 V. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.2 V to 3.6 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, and 3.3-V voltage nodes.
The SN74AVC8T245 is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the outputs so the buses are effectively isolated.
The SN74AVC8T245 is designed so that the control pins (DIR and OE) are supplied by VCCA.
The SN74AVC8T245 solution is compatible with a single-supply system and can be replaced later with a ’245 function, with minimal printed circuit board redesign.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, thus preventing damaging current backflow through the device when it is powered down.
The VCC isolation feature ensures that if either VCC input is at GND, both ports are in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE shall be tied to VCC through a pullup resistor
the minimum value of the resistor is determined by the current-sinking capability of the driver.
Título
8-Bit Dual-Supply Bus Transceiver with Configurable Voltage-Level Shifting and 3-State Outputs
Todos los nombres de productos, marcas registradas, marcas y logotipos utilizados en este sitio son propiedad de sus respectivos dueños. La representación, descripción o venta de productos con estos nombres, marcas comerciales, marcas y logotipos es solo para fines de identificación y no pretende indicar ninguna afiliación o autorización por parte de ningún titular de derechos.
Vista previa de las 3 primeras páginas de la ficha técnica
Vista previa del documento
SN74AVC8T245 8-Bit Dual-Supply Bus Transceiver With Configurable Voltage Translation and 3-State Outputs
ESD Protection Exceeds JESD 8000-V Human-Body Model 200-V Machine Model 1000-V Charged-Device Model (C101)
Control Inputs VIH/VIL Levels Are Referenced to VCCA VoltageVCC Isolation Feature If Either VCC Input Is at GND, All I/O Ports Are in the High-Impedance State
Ioff Supports Partial Power-Down Mode Operation Fully Configurable Dual-Rail Design Allows EachPort to Operate Over the Full to 3.6-V Power-Supply Range I/Os Are 4.6-V Tolerant Maximum Data Rates 170 Mbps (VCCA V or VCCB 320 Mbps (VCCA 1.8 V and VCCB 1.8 V)
This 8-bit noninverting bus transceiver uses two separate configurable power-supply rails. The SN74AVC8T245 is optimized to operate with VCCA/VCCB set 3.6 V. The device is operational with VCCA/VCCB as low 1.2 V. The A port is designed to track VCCA. VCCA accepts any supply voltage from 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 3.6 V. This allows for universal low-voltage bidirectional translation between any of the 1.8-V, 2.5-V, and 3.3-V voltage nodes.
The SN74AVC8T245 is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the outputs so the buses are effectively isolated.
The SN74AVC8T245 is designed so that the control pins (DIR and OE) are supplied by VCCA.The SN74AVC8T245 solution is compatible with a single-supply system and can be replaced later with a '245 function, with minimal printed circuit board redesign.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, thus preventing damaging current backflow through the device when it is powered down.
The VCC isolation feature ensures that if either VCC input is at GND, both ports are in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE shall be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA.
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.Changed MAX value for Operating free-air temperature, TA from: 85°C to: : 5 Added values for +125°C in Electrical Characteristics and all Switching Characteristics tables : 6 Added Documentation Support section, Receiving Notification of Documentation Updates, and Community
Added Pin Configuration and Functions section, ESD Rating table, Feature Description section, Device Functional Modes, Application and Implementation section, Power Supply Recommendations section, Layout section, Device and Documentation Support section, and Mechanical, Packaging, and Orderable Information section : 1
DESCRIPTIONAlgún número de pieza del mismo fabricante
Misma categoría
457 reseñas de compradores de Mexico
Rene Barrios Garcia
Length of registration:6 years
Very satisfied with
0
0
Responder0
12/22/2017
ING. JAVIER ORTIZ GARCIA
Length of registration:8 years
todo bien
0
0
Responder0
04/06/2017
pedr ortiz
Length of registration:12 years
EXELENTE SERICIO
0
0
Responder0
03/15/2017
alexsander chi
Length of registration:9 years
device good
0
0
Responder0
01/03/2017
Miguel Sanchez
Length of registration:7 years
Works perfect!
0
0
Responder0
12/14/2016
Gabriel de la Torre Rivera
Length of registration:1 years
llego bien y dentro del plazo esperado Gracias
0
0
Responder0
10/19/2016
Ing. Campos
Length of registration:11 years
Todo Ok.
0
0
Responder0
10/07/2016
ESAU ANDRACA RIVERA.
Length of registration:10 years
thanks
0
0
Responder0
09/18/2016
alonso arellano
Length of registration:7 years
exelente producto
0
0
Responder0
09/18/2016
Jose Antonio Cruz Cruz
Length of registration:9 years
ok
0
0
Responder0
09/01/2016
Método de pago europeo
Método de pago asiático
Método de pago americano
Método de pago internacional
Pedido
Pago
Transporte de mercancía
Cupón Regalo/Servicio Plus
Retorno de mercancías
Normalmente se aceptan devoluciones cuando se completan dentro de los 60 días a partir de la fecha de entrega del paquete.
Defectuoso (proporcione un informe de calidad de terceros de productos no conformes)
Los gastos de devolución deben ser prepagos; No aceptaremos envíos contra reembolso.
Politica de garantía
Todas las compras de UTSOURCE tienen una política de devolución de dinero de 60 días, más una garantía de UTSOURCE de 90 días contra cualquier defecto de fabricación. Esta garantía no se aplicará a ningún artículo donde los defectos hayan sido causados por un montaje incorrecto del cliente, el incumplimiento del cliente de seguir las instrucciones, la modificación del producto , operación negligente o inadecuada.
SN74AVC8T245PW
SN74AVC8T245PW tiene varias marcas en todo el mundo que pueden tener nombres alternativos para SN74AVC8T245PW debido a diferencias o adquisiciones regionales. SN74AVC8T245PW también se conoce con los siguientes nombres:
OPCIONES DE COMPRA
País:
United States
Correo Express: (FEDEX, UPS, DHL, TNT)Envío gratuito para los primeros 0.5kg para pedidos superiores a Mex $3384.51,cargos adicionales por peso superior
JudyGerente de personalización
sales@utsource.com
(888) 766 5577
+86 15302769052
+1 (312)899-4831
(whatsapp only)
Su dedicado servicio al cliente, brindándole el mejor servicio en cualquier momento.
Detener a los expertos en producción, podemos proporcionar una gran cantidad de componentes electrónicos que se han detenido y que son difíciles de encontrar para facilitar la empresa de mantenimiento.
Reply to
submit