AD537KD
DIP
Analog Devices
00+
IC V/F CONV 14-CDIP
Buy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country CodeSearch results filter:
Home > Elec-component > IC Chips > PMIC - V/F and F/V Converters
Stock:210
Minimum:1
Favorite
CAN-10
Analog Devices
96+
The AD537 is a monolithic V-F converter consisting of an input amplifier, a precision oscillator system, an accurate internal reference generator and a high current output stage. Only a single external RC network is required to set up any full-scale (F.S.) frequency up to 100 kHz and any F.S. input voltage up to ±30 V. Linearity error is as low as ±0.05% for 10 kHz F.S., and operation is guaranteed over an 80 dB dynamic range. The overall temperature coefficient (excluding the effects of external components) is typically ±30 ppm/°C. The AD537 operates from a single supply of 5 V to 36 V and consumes only 1.2 mA quiescent current. A temperature-proportional output, scaled to 1.00 mV/K, enables the circuit to be used as a reliable temperature-to-frequency converter; in combination with the fixed reference output of 1.00 V, offset scales such as 0°C or 0°F can be generated. The low drift (1μV/°C typ) input amplifier allows operation directly from small signals (e.g., thermocouples or strain gages) while offering a high (250 M(Ohm) input resistance. Unlike most V-F converters, the AD537 provides a square-wave output, and can drive up to 12 TTL loads, LEDs, very long cables, etc. The excellent temperature characteristics and long-term stability of the AD537 are guaranteed by the primary bandgap reference generator and the low T.C. silicon chromium thin film resistors used throughout. The device is available in either a TO-116 ceramic DIP or a TO-100 metal can; both are hermetically sealed packages. The AD537 is available in three performance/temperature grades; the J and K grades are specified for operation over the 0°C to +70°C range while the AD537S is specified for operation over the extended temperature range, -55°C to +125°C.
AD537JH is a monolithic integrated circuit from Analog Devices. It is a precision, low-cost, low-power, single-supply, 8-bit analog-to-digital converter (ADC). Description: The AD537JH is an 8-bit, l
Stock:2000
Minimum:1
Favorite
MSOP8
ADI
2013+
3 V/5 V Low Power, Synchronous Voltage-to-Frequency Converter
Description: 24-Bit, Sigma-Delta ADC with On-Chip Reference Features: 24-Bit Sigma-Delta ADC On-Chip Reference Low Noise: 0.5 μV RMS Low Power: 1.2 mW at 3 V Low Cost: $1.50 in 10,000 Quantity S
Stock:10000
Minimum:2
Favorite
Description: The AD650JN is a low power, low cost, chopper-stabilized, monolithic instrumentation amplifier. Features: * Low power: 5 mW * Low offset voltage: 0.5 mV * Low offset drift: 0.1 μV/°C * L
Favorite
Description: The AD652KP is a low power, low cost, monolithic, temperature compensated, voltage-to-frequency converter. Features: Low power: 5 mW max Low cost Monolithic construction Tempe
Stock:5000
Minimum:1
Favorite
Stock:510
Minimum:1
Favorite
Stock:3011
Minimum:1
Favorite
14-SOIC (0.154", 3.90mm Width)
Texas Instruments
Volt to Frequency and Frequency to Volt Converter IC 100kHz ±0.05% 14-SOIC
Favorite
Stock:310
Minimum:1
Favorite
Stock:195
Minimum:1
Favorite
Stock:10000
Minimum:2
Favorite
PLCC-20
Analog Devices
Voltage to Frequency Converter IC 2MHz ±0.02% 20-PLCC (9x9)
Stock:2000
Minimum:1
Favorite
Stock:10000
Minimum:1
Favorite
Stock:310
Minimum:3
Favorite
Stock:130
Minimum:5
Favorite
Stock:510
Minimum:1
Favorite
Stock:170
Minimum:1
Favorite
PDIP-14
Analog Devices
O614
Voltage-to-Frequency and Frequency-to-Voltage Converter
Stock:5000
Minimum:1
Favorite
Description: The AD650KNZ is a low power, high accuracy, low drift, precision voltage reference in a 14-pin dual-in-line (DIP) package. Features: * Low power consumption: 2.5 mW * High accuracy: 0.1%
Stock:5000
Minimum:1
Favorite
Description: The AD650SD is a low power, precision, monolithic, voltage-to-frequency converter. Features: Low Supply Current: 1.2 mA Low Input Offset Voltage: 0.5 mV Low Input Bias Current: 0
Stock:5000
Minimum:1
Favorite
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company