≥1:
S$16.18017
Buy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country CodeSearch results filter:
Home > Elec-component > IC Chips > Data Acquisition - Digital to Analog Converters (DAC)
CDIP-16
Analog Devices
03+
The AD558 DACPORT? is a complete voltage-output 8-bit digital-to-analog converter, including output amplifier, full microprocessor interface and precision voltage reference on a single monolithic chip. No external components or trims are required to interface, with full accuracy, an 8-bit data bus to an analog system. The performance and versatility of the DACPORT is a result of several recently-developed monolithic bipolar technologies. The complete microprocessor interface and control logic is implemented with integrated injection logic (I2 L), an extremely dense and low power logic structure that is process-compatible with linear bipolar fabrication. The internal precision voltage reference is the patented low voltage bandgap circuit which permits full-accuracy performance on a single +5 V to +15 V power supply. Thin-film silicon-chromium resistors provide the stability required for guaranteed monotonic operation over the entire operating temperature range (all grades), while recent advances in laser-wafer-trimming of these thin-film resistors permit absolute calibration at the factory to within ±1 LSB; thus no user-trims for gain or offset are required. A new circuit design provides voltage settling to ±1/2 LSB for a full-scale step in 800 ns. The AD558 is available in four performance grades. The AD558J and K are specified for use over the 0°C to +70°C temperature range, while the AD558S and T grades are specified for -55°C to +125°C operation. The "J" and "K" grades are available either in 16-pin plastic (N) or hermetic ceramic (D) DIPS. They are also available in 20-pin JEDEC standard PLCC packages. The "S" and "T" grades are available in the 16-pin hermetic ceramic DIP package. DACPORT is a registered trademark of Analog Devices, Inc.
Description: The AD558SD is a monolithic, low power, high accuracy, quad voltage-output, 12-bit digital-to-analog converter (DAC). Features: Low Power: 1.5 mW/Channel at +5 V High Accuracy: 0.02% Ma
Stock:5000
Minimum:1
Favorite
SOP-16
Texas Instruments
2.7-V TO 5.5-V 12-BIT 3-mS QUADRUPLE DIGITAL-TO-ANALOG CONVERTERS WITH POWER DOWN
Stock:2000
Minimum:1
Favorite
DIP-20
Maxim Integrated
9638/9632
Low-Power, Quad, 12-Bit Voltage-Output DAC with Serial Interface
Stock:2000
Minimum:1
Favorite
The AD7245JN is a monolithic, low power, 8-bit, successive approximation analog-to-digital converter (ADC) manufactured by Analog Devices. It is available in a 24-pin PDIP package. Features: * 8-bit
Stock:5000
Minimum:1
Favorite
Stock:2000
Minimum:1
Favorite
Description: The AD7524JN is a low power, quad 8-bit voltage output digital-to-analog converter (DAC) with an on-chip precision voltage reference. Features: - 8-bit resolution - Low power consumption
Stock:10000
Minimum:2
Favorite
Stock:5000
Minimum:1
Favorite
MSOP8
Analog Devices
06+
12-bit, 500 MSPS Analog-to-Digital Converter with Buffered Input 80-HTQFP
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:2
Favorite
The AD7528KN is a low power, 8-bit, multiplying digital-to-analog converter (DAC) from Analog Devices. It is available in a 20-pin DIP package. Description: The AD7528KN is a low power, 8-bit, multip
Stock:10000
Minimum:2
Favorite
Description: The AD7244 is a low power, low noise, 16-bit, successive approximation analog-to-digital converter (ADC). Features: 16-bit resolution Low power: 1.2 mW at 3 V Low noise: 0.7 μV RMS L
Stock:5000
Minimum:1
Favorite
DIP-16
Maxim Integrated
08+
Calibrated, Quad, 12-Bit Voltage-Output DACs with Serial Interface
Stock:2000
Minimum:1
Favorite
DIP-18
Analog Devices
10-Bit High Speed Multiplying D/A Converter Universal Digital Logic Interface
Stock:10000
Minimum:1
Favorite
Manufacturer: Maxim Integrated Description: High-Voltage, High-Current, Low-Dropout Linear Regulator Features: Output Voltage Range: 0.8V to 24V Output Current: 500mA Dropout Voltage: 0.3V (Typ) L
Stock:10000
Minimum:2
Favorite
Stock:5000
Minimum:1
Favorite
TQFP-80
Analog Devices
06/
12-Bit, 160 MSPS, 2×/4×/8× Interpolating Dual TxDAC® D/A Converter
Stock:2000
Minimum:1
Favorite
DIP-28
Burr-Browm
0523+
Microprocessor-Compatible 12-Bit Digital-to-Analog Converter
Description: The DAC811JP is a monolithic CMOS 8-bit digital-to-analog converter (DAC) with a voltage output. Features: - 8-bit resolution - Low power consumption - Low output impedance - Low voltage
Stock:5000
Minimum:1
Favorite
Stock:2000
Minimum:1
Favorite
Stock:5000
Minimum:1
Favorite
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company