≥1:
S$1.16425
Buy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country CodeSearch results filter:
SOP-20
FSC
04+
The MM74HC573 high speed octal D-type latches utilize advanced silicon-gate P-well CMOS technology. They possess the high noise immunity and low power consumption of standard CMOS integrated circuits, as well as the ability to drive 15 LS-TTL loads. Due to the large output drive capability and the 3-STATE feature, these devices are ideally suited for interfacing with bus lines in a bus organized system. When the LATCH ENABLE(LE) input is HIGH, the Q outputs will follow the D inputs. When the LATCH ENABLE goes LOW, data at the D inputs will be retained at the outputs until LATCH ENABLE returns HIGH again. When a HIGH logic level is applied to the OUTPUT CONTROL OC input, all outputs go to a HIGH impedance state, regardless of what signals are present at the other inputs and the state of the storage elements. The 74HC logic family is speed, function and pinout compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.
Description: The MM74HC573WM is a high-speed CMOS 8-bit register fabricated with silicon gate C2MOS technology. Features: High-speed operation Low power dissipation Low input current High noise im
Stock:10000
Minimum:3
Favorite
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:2
Favorite
SOP-16
Nexperia
The HEF4043BT is a quad R/S Latch with 3-state outputs with a common OE. Each latch has an active high set input (1S to 4S), an active high reset input (1R to 4R) and an active high 3-state output (1Q to 4Q). When OE is high, the latch output (nQ) is determined by the nR and nS inputs. When OE is low, the latch outputs are in the high impedance OFF-state. OE does not affect the state of the latch. The high impedance OFF-state feature allows common bussing of the outputs. It operates over a recommended VDD power supply range of 3 to 15V referenced to VSS (usually ground). Unused inputs must be connected to VDD, VSS or another input.
Description: The HEF4043BT is a quad 2-input NAND Schmitt trigger. Features: Low power consumption High noise immunity High input impedance Low output impedance High speed Low input current Lo
Stock:10000
Minimum:2
Favorite
SOP20
Texas Instruments
The TPIC6273DW is a monolithic high-voltage high-current power logic octal D Latch with DMOS transistor outputs designed for use in systems that require relatively high load power. The device contains a built-in voltage clamp on the outputs for inductive transient protection. Power driver applications include relays, solenoids and other medium-current or high-voltage loads. The TPIC6273 contains eight positive-edge-triggered D-type flip-flops with a direct clear input. Each flip-flop features an open-drain power DMOS transistor output. When clear (CLR\) is high, information at the D inputs meeting the setup time requirements is transferred to the DRAIN outputs on the positive-going edge of the clock pulse. clock triggering occurs at a particular voltage level and is not directly related to the transition time of the positive-going pulse. When the clock input (CLK) is at either the high or low level, the D input signal has no effect at the output.
Stock:5000
Minimum:1
Favorite
SOIC-20
Texas Instruments
D-Type Transparent Latch 1 Channel 8:8 IC Tri-State 20-SOIC
Stock:10000
Minimum:2
Favorite
Description: CD4099BM96 is a CMOS logic device manufactured by Texas Instruments. It is a 16-pin small-outline package (SOP) that contains four independent, high-speed, non-inverting buffers. Feature
Stock:10000
Minimum:11
Favorite
SOP24
Texas Instruments
81
9-BIT BUS-INTERFACE D-TYPE LATCHES WITH 3-STATE OUTPUTS
Description: Octal Bus Transceiver with 3-State Outputs Features: - Octal bus transceiver with 3-state outputs - High-impedance bus-hold data inputs eliminate the need for external pullup or
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:4
Favorite
DIP-20
Texas Instruments
100mA, 9V,±5% Tolerance, Voltage Regulator, Ta = -40°C to +125°C; Package: SOIC-8 Narrow Body; No of Pins: 8; Container: Tape and Reel; Qty per Container: 2500
Description: The SN74HCT573N is a high-speed CMOS logic octal D-type flip-flop device with 3-state outputs. Features: Inputs accept voltages up to 7V Outputs in 3-state for bus-oriented application
Stock:10000
Minimum:2
Favorite
SOIC-16
Texas Instruments
08+
3.3-V ABT OCTAL TRANSPARENT D-TYPE LATCHES WITH 3-STATE OUTPUTS
Stock:10000
Minimum:2
Favorite
DIP20
Moto
Octal 3-State Noninverting Transparent Latch with LSTTL-Compatible Inputs
Description: The MC74HCT373AN is a high-speed CMOS Octal D-Type Flip-Flop fabricated with silicon gate C2MOS technology. Features: - High-speed performance similar to equivalent Bipolar Schottky TTL
Stock:10000
Minimum:2
Favorite
TSSOP48
STMicroelectronics
D-Type Transparent Latch 2 Channel 8:8 IC Tri-State 48-TSSOP
Stock:10000
Minimum:2
Favorite
DIP-20
National Semiconductor
Octal Transparent Latch with 3-STATE Outputs; Package: DIP; No of Pins: 20; Container: Rail
Description: Octal D-Type Flip-Flop with 3-State Outputs Features: High-Speed Operation: tPD = 10 ns (typical) at VCC = 5.0 V Low Power Consumption: ICC = 4 μA (maximum) at TA = 25°C Outputs S
Stock:10000
Minimum:2
Favorite
SOP-20
On Semiconductor
D-Type Transparent Latch 1 Channel 8:8 IC Tri-State 20-SOIC
Description: The MC74VHC573DWR2G is a high-speed CMOS logic octal D-type flip-flop with 3-state outputs. Features: - High-speed CMOS logic - Octal D-type flip-flop - 3-state outputs - Output enable (
Stock:10000
Minimum:2
Favorite
TSSOP-48
Texas Instruments
Latch Transparent 3-ST 16-CH D-Type 48-Pin TSSOP T/R
Stock:10000
Minimum:1
Favorite
Stock:10000
Minimum:4
Favorite
Stock:10000
Minimum:3
Favorite
Description: The CY74FCT841BTPC is an 8-bit non-inverting buffer/line driver with 3-state outputs. Features: High-speed operation Low power consumption Outputs source/sink 24 mA Outputs can be wir
Stock:10000
Minimum:2
Favorite
Description: The CD4099BE is a quad 2-input exclusive-OR gate integrated circuit manufactured by Texas Instruments. Features: Four independent 2-input exclusive-OR gates Inputs accept voltages
Stock:10000
Minimum:3
Favorite
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company