≥1:
S$3.73852
Buy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country CodeSearch results filter:
Stock:10000
Minimum:2
Favorite
SOP-16
Maxim Integrated
04+
Microprocessor Supervisory Circuits The MAX691A/MAX693A/MAX800L/MAX800M microprocessor (μP) supervisory circuits are pin-compatible upgrades to the MAX691, MAX693, and MAX695. They improve performance with 30μA supply current, 200ms typ reset active delay on power-up, and 6ns chip-enable propagation delay. Features include write protection of CMOS RAM or EEPROM, separate watchdog outputs, backup-battery switchover, and a RESET-bar output that is valid with VCC down to 1V. The MAX691A/MAX800L have a 4.65V typical reset-threshold voltage, and the MAX693A/MAX800M\'s reset threshold is 4.4V typ
Description: Low-Voltage, Low-Power, Reset Circuits with Watchdog and Manual Reset Features: Low Supply Current: 0.9μA Watchdog Timer: - Time-Out Period: 1.6ms to 8.3s - Selectable Time-Out Period
Stock:10000
Minimum:2
Favorite
SOP-8
Maxim Integrated
Low-Cost, μP Supervisory Circuits The MAX705–MAX708/MAX813L microprocessor (μP) supervisory circuits reduce the complexity and number of components required to monitor power-supply and battery functions in μP systems. These devices significantly improve system reliability and accuracy compared to separate ICs or discrete components. The MAX705/MAX706/MAX813L provide four functions: 1. A reset output during power-up, power-down, and brownout conditions. 2. An independent watchdog output that goes low if the watchdog input has not been toggled within 1.6 seconds. 3. A 1.25V threshold detector for power-fail warning, low-battery detection, or for monitoring a power supply other than +5V. 4. An active-low manual-reset input. The MAX707/MAX708 are the same as the MAX705/MAX706, except an active-high reset is substituted for the watchdog timer. The MAX813L is the same as the MAX705, except RESET is provided instead of active-low RESET. Two supply-voltage monitor levels are available: The MAX705/MAX707/MAX813L generate a reset pulse when the supply voltage drops below 4.65V, while the MAX706/MAX708 generate a reset pulse below 4.40V. All four parts are available in 8-pin DIP, SO and μMAX? packages.
Description: Low-Dropout, 150mA, Adjustable and Fixed-Voltage Regulators Features: 150mA Output Current Low Dropout Voltage: 200mV (Typ) at 150mA Adjustable Output Voltage: 1.2V to 15V Fixed Outpu
Stock:10000
Minimum:2
Favorite
Description: The DS1232N is a nonvolatile memory supervisor from Dallas Semiconductor. Features: - Low power CMOS technology - Battery backup input - Manual reset input - Watchdog timer - Power-on re
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:1
Favorite
Description: Low-Dropout, Low-Noise, High-Current, +5V/±12V Supervisory Circuits Features: Low-Dropout Voltage: 200mV at 200mA Low-Noise Output: 0.1μVrms High-Current Output: 200mA +5V/±12
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:2
Favorite
TO-92
On/mot
4.59V Voltage Detector with Active Low Open Collector Output for 5V Systems, Pb- Free Device; Package: TO-92 TO-226 5.33mm Body Height; No of Pins: 3; Container: Bag/Envelope; Qty per Container: 2000
Description: The MC34064P-5G is a low-cost, low-power, PWM control circuit with an internal 5V reference voltage. Features: * Internal 5V reference voltage * Low-cost and low-power * PWM control circ
Stock:10000
Minimum:1
Favorite
SOP-8
Analog Devices
Low Cost Microprocessor Supervisory Circuit; Package: SOIC; No of Pins: 8; Temperature Range: Industrial
The ADM705ARZ is an 8-pin SOP (Small Outline Package) voltage supervisor from Analog Devices. It is a low-power, low-voltage reset IC with an active-low reset output. It is designed to monitor power s
Stock:10000
Minimum:1
Favorite
Description: The MAX691ACSE is a low-power, low-dropout, microprocessor reset circuit with manual reset capability. Features: Low-Power CMOS Technology Low-Dropout Voltage: 0.8V (Typ) Manual Reset
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:2
Favorite
SOP-8
Maxim Integrated
N/A
Quadruple 2-Input Multiplexers With Storage 16-CFP -55 to 125
Description: Low-Dropout, Low-Noise, 150mA Linear Regulator Features: - Output voltage range: 1.5V to 5.5V - Low dropout voltage: 200mV (typ) at 150mA - Low noise: 40μVrms (typ) at 10mA - Low qui
Stock:10000
Minimum:2
Favorite
The MB3771PF-G-BND-JNE1 is a SOP-8 (Small Outline Package) integrated circuit (IC) manufactured by Fuji. It is a voltage detector IC that monitors the voltage level of a power supply and generates a r
Stock:10000
Minimum:3
Favorite
DIP-8
Maxim Integrated
0527+
Power Supply Management Circuit, Fixed, 1 Channel, CMOS, PDIP8, PLASTIC, DIP-8
Description: Low-Voltage, Low-Power Reset Circuits with Watchdog and Manual Reset Features: Low-Voltage Operation: 2.7V to 5.5V Low Quiescent Current: 0.3μA (Typ) Watchdog Timer: 100ms to 1.6s
Stock:10000
Minimum:2
Favorite
Description: Low-Voltage, Low-Power, Microprocessor Supervisory Circuits Features: Low Supply Current: 0.8μA (Typ) Low Voltage Reset: 1.25V (Typ) Low Reset Threshold Accuracy: ±1.5% (Max) Low Rese
Stock:10000
Minimum:1
Favorite
DIP-8
MAX
93/00+
Microprocessor Voltage Monitors with Programmable Voltage Detection
Description: Low-Voltage, Low-Power, Microprocessor System Power-Supply Monitor Features: - Low-Voltage Operation: 2.7V to 5.5V - Low Power Consumption: 2.7μA - Monitors +5V, +3.3V, +2.5V, +1.8V,
Stock:10000
Minimum:2
Favorite
DIP-8
Motorola
00+
Tag-itTM HF-I Pro Standard Transponder Inlays CD 0-RFIDN -25 to 70
The MC33161P is a high-performance, low-power, monolithic, high-speed, dual operational amplifier from Motorola. It is designed for use in a wide range of applications, including audio, video, and ins
Stock:10000
Minimum:3
Favorite
Stock:10000
Minimum:2
Favorite
Description: The MAX8212CPA is a low-dropout (LDO) linear regulator with a wide input voltage range of 2.7V to 5.5V and a fixed output voltage of 3.3V. Features: - Output Voltage: 3.3V - Input Voltag
Stock:10000
Minimum:2
Favorite
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company