≥1:
£1.33547
Buy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country CodeSearch results filter:
Home > Elec-component > IC Chips > Interface - Drivers, Receivers, Transceivers
SOP8
SPX
The SP483 and SP485 are a family of half-duplex transceivers that meet the specifications of RS-485 and RS-422. Their BiCMOS design allows low power operation without sacrificing performance. The SP485 meets the requirements of RS-485 and RS-422 up to 5Mbps. Additionally, the SP483 is equipped with a low power Shutdown mode. The SP483 is internally slew rate limited to reduce EMI and can meet the requirements of RS-485 and RS-422 up to 250kbps.
Description: The SP483CN-L/TR is a low power, half-duplex transceiver designed for RS-485 and RS-422 communication. It is designed to meet the requirements of EIA Standard RS-485 and RS-422. Features
Stock:10000
Minimum:2
Favorite
TSSOP-16
National Semiconductor
03
3V LVDS Quad CMOS Differential Line Driver
Description: The DS90LV047ATMTC is a low voltage differential signaling (LVDS) transceiver designed to support data rates in excess of 250 Mbps (125 MHz). Features: - Low power consumption - Low volt
Stock:10000
Minimum:3
Favorite
SOP-16
NS3
DS34C87T CMOS Quad TRI-STATE Differential Line Driver; Package: SOIC NARROW; No of Pins: 16; Qty per Container: 2500/Reel
Description: The DS34C87TMX/NOPB is a high-speed, low-power, quad differential line receiver designed to meet the requirements of EIA/TIA-422-B and ITU Recommendation V.11. Features: Low power dissi
Stock:10000
Minimum:2
Favorite
SOP8
Maxim Integrated
06/
Automotive Catalog EMC Optimized CAN Transceiver 8-SOIC -40 to 125
Manufacturer: Maxim Integrated Description: RS-485/RS-422 Transceivers Features: Low Power Consumption: 200mW Slew-Rate Limited for Error-Free Data Transmission High Data Rates: 10Mbps High Noise
Stock:10000
Minimum:2
Favorite
Description: ST485CDR is a single-channel transceiver IC from STMicroelectronics. It is designed to meet the specifications of the EIA/TIA-485 standard for balanced communication. Features: Low po
Stock:10000
Minimum:4
Favorite
SN65LBC175D is a low-power differential line transceiver manufactured by Texas Instruments. It is a dual transceiver designed to meet the requirements of the EIA/TIA-485-A standard for balanced commun
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:2
Favorite
SOP-16
Texas Instruments
06+
Octal 3-State Noninverting Buffer/Line Driver/Line Receiver, TTL Level; Package: SOIC-20 WB; No of Pins: 20; Container: Tape and Reel; Qty per Container: 1000
Description: The SN65LVDS32D is a low-voltage differential signaling (LVDS) transceiver with integrated termination resistors. Features: 3.3-V power supply Low power dissipation Low-voltage diffe
Stock:10000
Minimum:2
Favorite
Description: The SN75ALS176DR is a quad differential line receiver designed for balanced digital data transmission over long lines. Features: High-speed operation: tPD = 4.0 ns (typ) Low power dis
Stock:10000
Minimum:2
Favorite
Description: Quadruple Differential Line Receiver Features: Low-power Schottky TTL-compatible inputs High-impedance inputs Outputs source/sink 24 mA Latch-up performance exceeds 100 mA per JESD 78
Stock:10000
Minimum:2
Favorite
TSSOP38
Texas Instruments
06+
Octal 3-State Inverter Transceiver/Latch; Package: SOIC-20 WB; No of Pins: 20; Container: Rail; Qty per Container: 38
Description: The SN65LVDT388ADBTR is a low-voltage differential signaling (LVDS) transceiver designed for high-speed data transmission over twisted-pair cables. Features: - Low-voltage differential s
Stock:5000
Minimum:1
Favorite
SSOP-20
Maxim Integrated
06+
3.0V, 【15kV ESD-Protected RS-232 Transceiver for PDAs and Cell Phones
Stock:10000
Minimum:1
Favorite
SOP
Texas Instruments
07/
Multiple RS-232 Drivers And Receivers 20-SOIC 0 to 70
Description: Dual High-Speed, Low-Power, High-Current, Low-Voltage, High-Side Power Switch Features: Low RDS(ON) of 0.4 Ω (typ) Low operating voltage of 2.7 V High current capability of 2
Stock:10000
Minimum:2
Favorite
The ST485CN is a transceiver IC from STMicroelectronics. It is a differential bus transceiver designed for balanced data transmission over long distances. It is available in an 8-pin DIP package. Fea
Stock:10000
Minimum:2
Favorite
SOP-8
SPX
15kV ESD-Protected, 3.3V, 1/8 Load, Failsafe RS-485/RS422 Transceivers
Description: SP3072EEN-L/TR is a low voltage, low power, dual N-channel MOSFET with logic level gate drive. Features: * Low on-state resistance * Low input capacitance * Low threshold voltage * Low g
Stock:10000
Minimum:2
Favorite
SOP8
Texas Instruments
06/
HIGH-SPEED CONTROLLER AREA NETWORK CAN TRANSCEIVERS
Description: The SN65LBC031QD is a low-power, low-skew, quad differential line receiver designed for digital data transmission over balanced lines. Features: - Low-power CMOS design - Low-skew output
Stock:10000
Minimum:2
Favorite
Description: Low Power Half Duplex RS-485 Transceiver Features: Low power consumption: 0.25 mA typical supply current 1.5 mA maximum supply current Low propagation delay: 20 ns typi
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:3
Favorite
TSSOP16
National Semiconductor
03
3V LVDS Quad CMOS Differential Line Receiver
Description: The DS90LV048ATMTC is a low voltage differential signaling (LVDS) transceiver designed for data transmission over balanced transmission lines. Features: Low voltage differential signali
Stock:10000
Minimum:1
Favorite
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company