≥1:
£1.00161
Buy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country CodeSearch results filter:
TSSOP48
02+
Low Voltage 16-Bit D-Type Flip-Flop with 5V Tolerant Inputs and Outputs; Package: TSSOP; No of Pins: 48; Container: Rail
Stock:10000
Minimum:2
Favorite
Description: The 74AC74SC is a dual D-type flip-flop with a clock (CP) and a reset (R) input. It is a high-speed CMOS device with a propagation delay of 8.5 ns. Features: High-speed CMOS Low po
Stock:10000
Minimum:2
Favorite
SOP-20
TI9
These monolithic, positive-edge-triggered flip-flops utilize TTL circuitry to implement D-type flip-flop logic with an enable input. The 'LS377, 'LS378, and 'LS379 devices are similar to 'LS273, 'LS174, and 'LS175, respectively, but feature a common enable instead of a common clear. Information at the D inputs meeting the setup time requirements is transferred to the Q outputs on the positive-going edge of the clock pulse if the enable input G\ is low. Clock triggering occurs at a particular voltage level and is not directly related to the transition time of the positive-going pulse. When the clock input is at either the high or low level, the D input signal has no effect at the output. The circuits are designed to prevent false clocking by transitions at the G\ input. These flip-flops are guaranteed to respond to clock frequencies ranging from 0 to 30 MHz while maximum clock frequency is typically 40 megahertz. Typical power dissipation is 10 milliwatts per flip-flop.
Stock:10000
Minimum:3
Favorite
DIP24
Texas Instruments
00+
ti SN74ALS577A, Octal D-type Edge-triggered Flip-flops With 3-State Outputs
Description: The SN74ALS577ANT is a high-speed, low-power, octal D-type flip-flop with 3-state outputs. Features: * Low power consumption * High-speed operation * 3-state outputs * TTL-compatible inp
Stock:10000
Minimum:2
Favorite
SOP-20
FSC
Octal D Flip-Flop with Clear; Package: SOIC-Wide; No of Pins: 20; Container: Rail
Stock:10000
Minimum:4
Favorite
Description: The 74ACTQ18823SSC is a high-speed CMOS octal bus transceiver featuring non-inverting 3-state outputs and is designed for 2.7V to 3.6V VCC operation. Features: - High-speed operation: tp
Stock:5000
Minimum:1
Favorite
TSSOP14
FSC
MR, Active low P-P internal pullup, Active high P-P, -40C to +125C, 5-SOT-23, T/R
Stock:10000
Minimum:3
Favorite
DIP22
Texas Instruments
00+
Octal D-Type Latch 3-State Outputs; Package: SOEIAJ-20; No of Pins: 20; Container: Tape and Reel; Qty per Container: 2000
Description: The SN74AS823ANT is a 8-bit priority encoder with three-state outputs from Texas Instruments. It is a part of the 74AS logic family. Features: - 8-bit priority encoder - Three-state outp
Stock:10000
Minimum:1
Favorite
The NL17SZ74USG is a high-speed, low-power, single-pole double-throw (SPDT) analog switch from ON Semiconductor. It is designed for use in applications requiring low on-resistance and low power consum
Stock:10000
Minimum:3
Favorite
Description: The 74HC174D is a high-speed CMOS logic device containing four D-type flip-flops with individual data, set, reset, and clock inputs. The device is designed for 2-V to 6-V VCC operation.
Stock:10000
Minimum:2
Favorite
DIP-16
National Semiconductor
Zener Diode 225 mW 2.4 V ±5%SOT-23; Package: SOT-23 TO-236 3 LEAD; No of Pins: 3; Container: Tape and Reel; Qty per Container: 10000
Description: Quad D-Type Flip-Flop Features: Low power consumption High noise immunity High speed operation Inputs accept voltages up to 5.5V Outputs source/sink 24mA Compatible with TTL
Stock:10000
Minimum:3
Favorite
Stock:10000
Minimum:4
Favorite
SOP20
FSC
Octal D-Type Flip-Flop; Package: SOIC-Wide; No of Pins: 20; Container: Rail
Stock:10000
Minimum:2
Favorite
DIP
STMicroelectronics
Low-Voltage Adjustable Precision Shunt Regulator 3-TO-92 -40 to 85
Description: The M74HC74B1R is a dual D-type flip-flop with reset. It has two independent D-type flip-flops with complementary outputs. The flip-flops are edge-triggered and are clocked by the positiv
Stock:10000
Minimum:2
Favorite
DIP-14
Fairchild
Dual Positive-Edge-Triggered D Flip-Flops with Preset, Clear and Complementary Outputs
Description: The DM74LS74AN is a dual D-type flip-flop with individual data (D) and clock (CP) inputs, set (S) and reset (R) inputs, and complementary Q and Q outputs. Features: Positive-edge trigg
Stock:10000
Minimum:3
Favorite
Description: CMOS Quad Exclusive-OR Gate Feature: High Speed: tPD = 10 ns (Typical) at VDD = 10 V Low Power Consumption: ICC = 0.4 μA (Max) at TA = 25°C Wide Operating Voltage Range: VDD = 2 V to
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:3
Favorite
Description: The MM74C107N is a dual J-K flip-flop with reset in a 14-pin DIP package. Features: High Speed Operation Low Power Consumption Positive Edge-Triggered Inputs Reset Inputs
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:2
Favorite
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company