IO Expansion Shield

From Waveshare Wiki
Revision as of 06:15, 3 November 2016 by Waveshare-admin (talk | contribs) (Text replace - " [http://www.waveshare.com/" to " {{Amazon|default=display |More = [http://www.waveshare.com/")
Jump to: navigation, search
IO Expansion Shield
IO-Expansion-Shield

Arduino IO Expansion Shield
{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Introduction

Arduino IO Expansion Shield

{{Amazon|default=display |More = More

Resources

Related Modules

FAQ

 Answer:
No, this RESET key can be used to reset the XBee and the WIFI-LPT100 only.
{{{3}}}
{{{4}}}

{{{5}}}


 Answer:
Yes, you can. The IO Expansion Shield provides some conversion interfaces for the Arduino development board to make configuration and communication to the XBee or the WIFI-LPT100. So you can apply the Arduino development board to configure the XBee or the WIFI-LPT100 by setting the corresponding jumpers on the IO Expansion Shield.
{{{3}}}
{{{4}}}

{{{5}}}


Support

Support

If you require technical support, please go to the Support page and open a ticket.