Difference between revisions of "USB AVR JTAGICE XPII"

From Waveshare Wiki
Jump to: navigation, search
Line 25: Line 25:
  
 
==FAQ==
 
==FAQ==
−
I connect the USB AVR JTAG to a PC, but the PC cannot identify it. Why?
+
'''Q:''' To use this downloader, is it necessary to install the drive?
 +
*Yes, the driver is required. XPII is compatible with MKII, and XPII and MKII share the same driver provided by AVR Studio. After installed the software, you can find the corresponding MKII device under the option Jungo in the Device Manager.
 +
 
 +
'''Q:'''Does this downloader support Win8 OS?
 +
*Yes, it supports, but you should install the latest version of software provide by Atmel [http://www.atmel.com/tools/atmelstudio.aspx?tab=overview AVR Studio].
 +
*Click here to check: [https://www.waveshare.comhttp://www.atmel.com/Images/AStudio6_2sp1_1502-readme.pdf New version system list]
 +
 
 +
'''Q:'''My OS is win8, and I want to use this software under IAR. But there is a "FATAL ERROR ..." appeared, why? (PS: Environment: win8 OS, AVR Studio 6.2, IAR in old version)
 +
 
 +
*To solve the incompatible problem between IAR software and win8 OS, you can install the IAR 6.4 PATCH provided by [http://www.iar.com/ IAR official].---"''Thank for David C** to share his experience''"
 +
 
 +
'''Q:''' What are the common errors and corresponding resolutions in using USB AVR JTAGICE XPII or AT AVR JTAG ICE MKII?
 +
*Click here to check the data provided by Atmel: [http://www.atmel.com/webdoc/jtagicemkii/jtagicemkii.known_issues.html Exhaustive list].
  
−
*The PC may identify the USB AVR JTAG as a USB-to-COM interface. Normally, most PCs may have this driver:[[File:USB-AVRISP-1.png]]
 
−
*If the PC cannot identify the USB AVR JTAG, you can install this driver to your PC: [[:File:FT232-Driver.7z|Click here to download]]
 
−
*'''Notice: '''If the COM port occupied by the USB AVR JTAG is out of the range of COM1~COM4 (In this example, it is COM6 as the figure above shows), please modify the relative COM port number to the range of COM1~COM4, so that the USB AVR JTAG can work properly.
 
  
 
==Support==
 
==Support==
 
{{Service00}}
 
{{Service00}}

Revision as of 03:30, 22 April 2015

[中文]

Resources

http://www.waveshare.com/product/USB-AVR-JTAGICE-XPII.htm" target="_blank" title="Introduction"> http://www.waveshare.com/img/preview/USB-AVR-JTAGICE-XPII_L.jpg" width="300" height="225" class="thumbimage">

http://www.waveshare.com/img/preview/USB-AVR-JTAGICE-XPII_L.jpg" target="_blank" class="internal" title="Full View">

USB AVR JTAGICE XPII

FAQ

Q: To use this downloader, is it necessary to install the drive?

  • Yes, the driver is required. XPII is compatible with MKII, and XPII and MKII share the same driver provided by AVR Studio. After installed the software, you can find the corresponding MKII device under the option Jungo in the Device Manager.

Q:Does this downloader support Win8 OS?

Q:My OS is win8, and I want to use this software under IAR. But there is a "FATAL ERROR ..." appeared, why? (PS: Environment: win8 OS, AVR Studio 6.2, IAR in old version)

  • To solve the incompatible problem between IAR software and win8 OS, you can install the IAR 6.4 PATCH provided by IAR official.---"Thank for David C** to share his experience"

Q: What are the common errors and corresponding resolutions in using USB AVR JTAGICE XPII or AT AVR JTAG ICE MKII?


Support

Support

If you require technical support, please go to the Support page and open a ticket.

Retrieved from "https://www.waveshare.com/w/index.php?title=USB_AVR_JTAGICE_XPII&oldid=3176"