USB AVR JTAGICE XPII
From Waveshare Wiki
Revision as of 03:23, 22 April 2015 by Wiki Editorial Team (talk | contribs)
[δΈζ]
Resources
FAQ
I connect the USB AVR JTAG to a PC, but the PC cannot identify it. Why?
- The PC may identify the USB AVR JTAG as a USB-to-COM interface. Normally, most PCs may have this driver:
- If the PC cannot identify the USB AVR JTAG, you can install this driver to your PC: Click here to download
- Notice: If the COM port occupied by the USB AVR JTAG is out of the range of COM1~COM4 (In this example, it is COM6 as the figure above shows), please modify the relative COM port number to the range of COM1~COM4, so that the USB AVR JTAG can work properly.
Support
Support
If you require technical support, please go to the Support page and open a ticket.