IO Expansion Shield

From Waveshare Wiki
Jump to: navigation, search
IO Expansion Shield
IO-Expansion-Shield

Arduino IO Expansion Shield
{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Primary Attribute
Category: Arduino, Shields, Moduiles, LCD
{{{userDefinedInfo}}}: {{{userdefinedvalue}}}
Brand: Waveshare
Website
International: UTSOURCE website
Chinese: 官方中文站点
Onboard Interfaces
I2C
Related Products

Introduction

Arduino IO Expansion Shield

More

Resources

Related Modules

FAQ

Question:
Can I use the RESET key on the IO Expansion Shield to reset Arduino development board?
Answer:
No, this RESET key can be used to reset the XBee and the WIFI-LPT100 only.


Question:
Can I configure the XBee or the WIFI-LPT100 installed on the IO Expansion Shield via the serial interface of the Arduino development board?
Answer:
Yes, you can. The IO Expansion Shield provides some conversion interfaces for the Arduino development board to make configuration and communication to the XBee or the WIFI-LPT100. So you can apply the Arduino development board to configure the XBee or the WIFI-LPT100 by setting the corresponding jumpers on the IO Expansion Shield.



Support

Please contact us by Email/Skype/WeChat for technology support.Our response may be delay, you can just leave your questions, we will reply to you as soon as possible in working time.

Service email.png [email protected]
Service skype.png [email protected]
Service wechat.png Webchat Linzeru.png
Service time.png 09:00 - 18:00 (UTC+8 Monday to Staturday)