IO Expansion Shield
From Waveshare Wiki
Revision as of 09:10, 16 November 2015 by Wiki Editorial Team (talk | contribs)
[δΈζ]
Introduction
Arduino IO Expansion Shield
Resources
Related Modules
FAQ
Answer:
No, this RESET key can be used to reset the XBee and the WIFI-LPT100 only.
{{{5}}}
Answer:
Yes, you can. The IO Expansion Shield provides some conversion interfaces for the Arduino development board to make configuration and communication to the XBee or the WIFI-LPT100. So you can apply the Arduino development board to configure the XBee or the WIFI-LPT100 by setting the corresponding jumpers on the IO Expansion Shield.
{{{5}}}
Support
Support
If you require technical support, please go to the Support page and open a ticket.