≥1:
US $1.62827
Buy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country CodeSearch results filter:
Home > Elec-component > IC Chips > Interface - Analog Switches, Multiplexers, Demultiplexers
Stock:10000
Minimum:2
Favorite
Description: CMOS Quad SPST Switches Features: Low On Resistance: RON = 0.7 Ω (max) Low Off Leakage Current: IOFF = 0.1 nA (max) Low Power Consumption: ICC = 1.5 μA (max) Fast Switching Speeds: tO
Stock:10000
Minimum:2
Favorite
Description: DG506ADN is a high-speed, low-on-resistance, low-capacitance, low-voltage, monolithic dual MOSFET array. Features: Low RDS(on) Low input capacitance Low input/output leakage High-spe
Stock:10000
Minimum:1
Favorite
SOP16
ADI
1121+
The ADG438F and ADG439F are CMOS analog multiplexers, with the ADG438F comprising eight single channels and the ADG439F comprising four differential channels. These multiplexers provide fault protection. Using a series n-channel, p-channel, and n-channel MOSFET structure, both device and signal source protection is provided in the event of an overvoltage or power loss. The multiplexer can withstand continuous overvoltage inputs from ?40 V to +55 V. During fault conditions with power supplies off, the multiplexer input (or output) appears as an open circuit and only a few nanoamperes of leakage current flows. This protects not only the multiplexer and the circuitry driven by the multiplexer, but also protects the sensors or signal sources which drive the multiplexer. The ADG438F switches one of eight inputs to a common output as determined by the 3-bit binary address lines, A0, A1, and A2. The ADG439F switches one of four differential inputs to a common differential output as determined by the 2-bit binary address lines, A0 and A1. An EN input on each device is used to enable or disable the device. When disabled, all channels are switched off. Product Highlights Fault Protection. The ADG438F and ADG439F can with-stand continuous voltage inputs up to ?40 V or +55 V. When a fault occurs due to the power supplies being turned off, all the channels are turned off and only a leakage current of a few nanoamperes flows. On channel saturates while fault exists. Low RON. Fast Switching Times. Break-Before-Make Switching. Switches are guaranteed break-before-make so that input signals are protected against momentary shorting. Trench Isolation Eliminates Latch-Up. A dielectric trench separates the p-channel and n-channel MOSFETs thereby preventing latch-up. Improved Off Isolation. Trench isolation enhances the channel-to-channel isolation of the ADG438F/ADG439F. Applications Data acquisition systems Industrial and process control systems Avionics test equipment Signal routing between systems High reliability control systems
Description: Quad SPST CMOS Analog Switch Features: Low On-Resistance: 0.5Ω (max) Low Power Consumption: 0.5μA (max) Fast Switching: tON = 4ns (max) Low Charge Injection: 5pC (max) ESD
Stock:10000
Minimum:2
Favorite
SOT109
PH3
The HEF4051BT is an 8-channel Analog Multiplexer/Demultiplexer with three address inputs (S1 to S3), an active low enable input (E\), eight independent inputs/outputs (Y0 to Y7) and a common input/output (Z). The device contains eight bidirectional analog switches, each with one side connected to an independent input/output (Y0 to Y7) and the other side connected to a common input/output (Z). The analog inputs/outputs (Y0 to Y7 and Z) can swing between VDD as a positive limit and VEE as a negative limit. Unused inputs must be connected to VDD, VSS or another input. For operation as a digital multiplexer/demultiplexer, VEE is connected to VSS (typically ground).
Description: The HEF4051BT is a CMOS analog multiplexer/demultiplexer with low ON-resistance and low power consumption. Features: Low ON-resistance Low power consumption High speed switching High
Stock:10000
Minimum:3
Favorite
Stock:10000
Minimum:1
Favorite
Description: Quad SPST CMOS Analog Switch Features: Low On Resistance: RON = 0.5 Ω (max) Low Power Consumption: 1.5 μA (max) Low Charge Injection: 10 pC (max) Low Crosstalk: –90 dB (max)
Stock:10000
Minimum:2
Favorite
The ADG507AKNZ is a low on-resistance, high-speed, CMOS analog multiplexer/demultiplexer. It is designed to operate from a single +5 V supply, and is available in a 28-pin DIP package. Features: *
Stock:10000
Minimum:2
Favorite
Description: DG309CY is a single-pole, double-throw (SPDT) analog switch manufactured by Harris Corporation. Features: Low On-Resistance: 0.7Ω max High Off-Isolation: -70dB @ 1MHz Low Crosstalk: -
Stock:10000
Minimum:1
Favorite
TSSOP-14
On Semiconductor
0717+
Quad Analog Switch/Multiplexer/Demultiplexer; Package: TSSOP-14; No of Pins: 14; Container: Tape and Reel; Qty per Container: 2500
Description: The MC74LVX4066DTR2G is a quad bilateral switch with low voltage CMOS logic. Features: - Low voltage CMOS logic - Low power consumption - High speed switching - Low on-state resistance -
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:2
Favorite
DIP-16
National Semiconductor
00+
Triple 2-Channel Analog Multiplexer/Demultiplexer; Package: DIP; No of Pins: 16; Container: Rail
Description: The CD4053BCN is a CMOS analog multiplexer/demultiplexer. Features: Low On-Resistance: 250Ω max Low Off-Leakage: 0.1μA max Low Power Consumption: 0.4μA max High Off-Isolation
Stock:10000
Minimum:4
Favorite
Stock:10000
Minimum:1
Favorite
Stock:5000
Minimum:1
Favorite
Description: 8-Channel SPST CMOS Analog Multiplexer/Demultiplexer Features: - Low On-Resistance: 0.5Ω (Max) - Low Off-Leakage Current: 0.1nA (Max) - Low On-Resistance Flatness: 0.2Ω (Max) - Low Power
Stock:10000
Minimum:2
Favorite
Description: The CD4097BE is a CMOS logic device from Texas Instruments. It is a high-speed CMOS logic quad S-R flip-flop with complementary outputs and an overriding set or reset. Features: High-s
Stock:10000
Minimum:2
Favorite
TSSOP-16
Analog Devices
Low-Voltage , 3-Wire Serially-Controlled , Matrix Switches
Stock:10000
Minimum:1
Favorite
DFN-6
On Semiconductor
0742+
Analog Multiplexers / Demultiplexers
Description: The NC7SB3157L6X is a single Dual-Input Single-Output (DISO) Non-Inverting Buffer with Schmitt-Trigger Inputs in a 6-Pin DFN package. Features: Low Input Current: 1 μA Max High Output
Stock:10000
Minimum:4
Favorite
Description: Quad Single-Supply CMOS Analog Multiplexer Features: Low On-Resistance: 150Ω max Low Off-Leakage Current: 1nA max Low Power Consumption: 1.5μA max Low Crosstalk: -65dB max Wide Oper
Stock:10000
Minimum:1
Favorite
DIP-18
Analog Devices
LC2MOS Latchable 4-/8-Channel High Performance Analog Multiplexers
Description: The ADG428BN is a 4-channel, single-supply, low-voltage, CMOS analog multiplexer/switch. Features: Low On-Resistance: RON = 0.7 Ω (max) Low Off-Leakage Current: 10 nA (max) Low Power C
Stock:10000
Minimum:1
Favorite
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company