Buy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country CodeSearch results filter:
Home > Elec-component > IC Chips > Interface - Drivers, Receivers, Transceivers
Utsource
TSSOP-16
Maxim Integrated
00+
Leaded Cartridge Fuse; Current Rating:250mA; Voltage Rating:250V; Fuse Terminals:Axial Lead; Fuse Type:Time Delay; Voltage Rating:250V; Body Material:Glass; Diameter:5.2mm; Fuse Size/Group:5 x 20 mm; Lead Length:38.1mm RoHS Compliant: Yes
The MAX3232CUE is a low-power, low-voltage, 3.0V to 5.5V, RS-232 transceiver from Maxim Integrated. It is designed to provide a full-duplex, asynchronous communication interface between a controller a
Stock:10000
Minimum:2
Favorite
DIP-16
Maxim Integrated
00/98
+5V-Powered, Multichannel RS-232 Drivers/Receivers The MAX220–MAX249 family of line drivers/receivers is intended for all EIA/TIA-232E and V.28/V.24 communications interfaces, particularly applications where ±12V is not available. These parts are especially useful in battery-powered systems, since their low-power shutdown mode reduces power dissipation to less than 5μW. The MAX225, MAX233, MAX235, and MAX245/MAX246/MAX247 use no external components and are recommended for applications where printed circuit board space is critical.
Manufacturer: Maxim Integrated Description: RS-232 Transceiver Features: - Operates from a single 5V supply - Low power consumption (5.5 mA) - Low shutdown current (0.1 μA) - ESD protection exceeds J
Stock:10000
Minimum:2
Favorite
SOP-16
Intersil
+/-15kV, ESD-Protected, +5V Powered,RS-232 Transmitters/Receivers
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:1
Favorite
Description: The MAX485CPA is a low-power transceiver for RS-485 and RS-422 communication. It is designed to meet the requirements of both half-duplex and full-duplex communication. Features: Low-p
Stock:10000
Minimum:4
Favorite
Stock:10000
Minimum:1
Favorite
Description: The DS26C31TN is a differential line transceiver designed for digital data transmission over balanced lines. Features: - Low power CMOS technology - High speed: tpd = 3.5ns - Low power d
Stock:10000
Minimum:2
Favorite
QFP-64
Texas Instruments
IEEE 1394a Two-Port Cable Transceiver/Arbiter 64-HTQFP 0 to 70
The TSB41AB2PAPG4 is a 64-pin quad flat package (QFP) integrated circuit (IC) manufactured by Texas Instruments (TI). It is a low-power IEEE 1394a-2000 Link-Layer Controller designed to provide a cost
Stock:10000
Minimum:2
Favorite
Description: The BU2099FV-E2 is an IC (Integrated Circuit) from ROHM Semiconductor. It is a low voltage, low power, high speed, low noise, low distortion, low EMI (electromagnetic interference) audio
Stock:10000
Minimum:2
Favorite
Description: The MAX232CPE is a dual driver/receiver that includes a capacitive voltage generator to supply TIA/EIA-232-F voltage levels from a single 5V supply. Each receiver converts TIA/EIA-232-F i
Stock:10000
Minimum:4
Favorite
SOP-16
Maxim Integrated
0546/
+5V-Powered, Multichannel RS-232 Drivers/Receivers
Stock:10000
Minimum:2
Favorite
Description: Dual, High-Speed, Low-Power, 8-Bit DACs with SPI Interface Features: 8-Bit Resolution Low Power: 2.7 mW/DAC High Speed: 1.2 μs Settling Time SPI Compatible Serial Interface Low Glit
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:2
Favorite
TQFP-80
Texas Instruments
00+
IEEE 1394a THREE-PORT CABLE TRANSCEIVER/ARBITER
Stock:5000
Minimum:1
Favorite
SOP-14
Maxim Integrated
97+
Low-Power, Slew-Rate-Limited RS-485/RS-422 Transceivers
Description: The MAX491CSD is a low-power, single-supply, fault-protected, RS-485/RS-422 transceiver. Feature: Low-Power Consumption: 2.2mA Typical Fault-Protected RS-485/RS-422 Transceiver ±15kV
Stock:10000
Minimum:2
Favorite
The DS275 is a dual-channel, low-power, temperature-to-voltage converter from Dallas Semiconductor. It is housed in an 8-pin DIP package and is designed to provide a linear output voltage proportional
Stock:5000
Minimum:1
Favorite
Description: Dual RS-232 Line Driver/Receiver Features: +5V Single Supply Operation Low Power Consumption Low Input and Output Leakage 0.2μA Max Shutdown Supply Current ±15kV ESD Protection
Stock:10000
Minimum:2
Favorite
The SN75116N is a quad differential line driver designed for balanced digital data transmission over twisted-pair cables. It is manufactured by Texas Instruments and comes in a 16-pin DIP package. Fe
Stock:10000
Minimum:2
Favorite
The DS3695N is an integrated circuit (IC) from Texas Instruments that functions as a dual supply differential line receiver. It is suitable for applications requiring improved receiver sensitivity, co
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:2
Favorite
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company
Stock
Toll-Free Call
(888) 766 5577 USA & Canada
+52 5515436027
+52 5515436028 Mexico
+49 6931090199 Germany
+55 21 3609 8727 Brazil
(800) 137235 Italy
(900) 649657 Spain
+1 (312) 899-4831 USA
+49 15217848563 Germany
+52 55 7637 4368 Mexico
GLOBAL PAYMENTS
Global logistics
Required
