UTSOURCE（）サイトは、ここをクリック
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ アドレスの追加
新運送先
*追跡情報を時間内に受信できるように、携帯電話番号を正しく入力してください。
国コード検索結果フィルタ:
Utsource
DIP
Texas Instruments
06+
Parameter Symbol Conditions Min Typ Max Unit Supply Voltage VCC Operating 4.75 5.0 5.25 V Output Current IO Continuous - - 35 mA Output Voltage Swing VOL IO = 15mA - 0.4 0.6 V Output Volt
IC DRIVER 4/0 16DIP
SOP8
National Semiconductor
13+
Description: The DS75176B is a differential line driver designed to meet the requirements of EIA-422-B and ITU Recommendation V.11. Features: Differential line driver EIA-422-B and ITU Recommendat
IC TRANSCEIVER HALF 1/1 8SOIC
DIP-16
Maxim Integrated
93+
Description: The MAX232EPE is a dual driver/receiver that includes a capacitive voltage generator to supply EIA-232 voltage levels from a single 5V supply. Features: Operates from a single 5V supp
+5V-Powered, Multichannel RS-232 Drivers/Receivers The MAX220–MAX249 family of line drivers/receivers is intended for all EIA/TIA-232E and V.28/V.24 communications interfaces, particularly applications where ±12V is not available. These parts are especially useful in battery-powered systems, since their low-power shutdown mode reduces power dissipation to less than 5μW. The MAX225, MAX233, MAX235, and MAX245/MAX246/MAX247 use no external components and are recommended for applications where printed circuit board space is critical.
SOP-8
ADI
1035+
Manufacturer: Analog Devices Package: SOP-8 Description: The ADM1485ARZ is a low-power, low-voltage, differential line transceiver designed for RS-485 and RS-422 communication. Features: Low power
The ADM1485 is a differential line transceiver suitable for high speed bidirectional data communication on multipoint bus transmission lines. It is designed for balanced data transmission and complies with both EIA Standards RS-485 and RS-422. The part contains a differential line driver and a differential line receiver. Both the driver and the receiver may be enabled independently. When disabled, the outputs are tristated. The ADM1485 operates from a single +5 V power supply. Excessive power dissipation caused by bus contention or by output shorting is prevented by a thermal shutdown circuit. This feature forces the driver output into a high impedance state if during fault conditions a significant temperature increase is detected in the internal driver circuitry. Up to 32 transceivers may be connected simultaneously on a bus, but only one driver should be enabled at any time. It is important therefore that the remaining disabled drivers do not load the bus. To ensure this, the ADM1485 driver features high output impedance when disabled and also when powered down. This minimizes the loading effect when the transceiver is not being utilized. The high impedance driver output is maintained over the entire common-mode voltage range from -7 V to +12 V. The receiver contains a fail safe feature which results in a logic high output state if the inputs are unconnected (floating). The ADM1485 is fabricated in BiCMOS, an advanced mixed technology process combining low power CMOS with fast switching bipolar technology. All inputs and outputs contain protection against ESD; all driver outputs feature high source and sink current capability. An epitaxial layer is used to guard against latch-up. The ADM1485 features extremely fast switching speeds. Minimal driver propagation delays permit transmission at data rates up to 30 Mbits/s while low skew minimizes EMI interference. The part is fully specified over the commercial and industrial temperature range and is available in an 8-pin DIL/SOIC package.
SOP14
Maxim Integrated
07+
Description: Low-Power, Single Supply, RS-485/RS-422 Transceivers Features: Operates From a Single 5V Supply Low-Power Shutdown Mode Reduces Supply Current to Less Than 1μA ±15kV ESD Protect
IC TRANSCEIVER FULL 1/1 14SOIC
SOP-16
STI
09
Parameter Symbol Min Typ Max Unit Conditions Supply Voltage VCC 4.5 - 5.5 V Output High-Level Voltage VOH 2.4 4.0 5.0 V IO = -4 mA Output Low-Level Voltage VOL 0.0 0.4 0.6 V IO = 16 mA I
SOP
National Semiconductor
01+PB
Description: Dual Differential Line Receiver Features: Low power consumption High common-mode rejection Low input capacitance Low input bias current Low output skew High data rate TTL compatibl
IC DRIVER 2/0 16SOIC
SO-8
Analog Devices
05+
Description: The ADM1485ARZ is a low-power, low-voltage, differential line transceiver that meets the specifications of the RS-485 and RS-422 standards. Features: Low power consumption: 0.8 mA (typ
IC TRANSCEIVER HALF 1/1 8SOIC
SO
NXP Semiconductors
Parameter Symbol Min Typical Max Unit Conditions Supply Voltage VCC 3.5 - 5.5 V Operating Range Standby Current ISB - 10 20 μA VCC = 5V, TA = 25°C Active Current IOP - 8.5 13 mA VCC = 5V, T
CAN 1Mbps Standby 5V Automotive 8-Pin SO T/R
SSOP
Maxim Integrated
05+
Manufacturer: Maxim Description: RS-232 Transceiver Features: ±15kV ESD Protection on All Ports Low Power Consumption: 5μA Max 0.1μF Capacitors Required for Operation Low Supply Voltage: 3V
IC TRANSCEIVER FULL 5/3 28SSOP
SOP-8
Maxim Integrated
09+
Description: RS-485/RS-422 Transceiver Features: Half-Duplex Communication Slew-Rate Limited Transmitter for Reduced EMI and Improved Noise Immunity Low-Power Shutdown Mode High-Speed Data Rates u
IC TRANSCEIVER HALF 1/1 8SOIC
DIP
Texas Instruments
01+
Description: The AM26LS31PC is a quad differential line receiver designed for digital data transmission over balanced lines. It is designed to meet the requirements of ANSI TIA/EIA-422-B and ITU Recom
IC DRIVER 4/0 16DIP
SOP16
EXAR
1303+PB
Parameter Symbol Min Typ Max Unit Notes Operating Voltage Vcc 4.75 5 5.25 V Operating Current (TX) Icc(TX) 100 300 500 μA Operating Current (RX) Icc(RX) 100 300 500 μA Data Rate 120
IC TRANSCEIVER FULL 2/2 16SOIC
64-TQFP Exposed Pad
Texas Instruments
Description: The TSB41AB1PAPG4 is a IEEE 1394a-2000 compliant single-chip digital controller for high-speed serial bus applications. It is designed to provide a low-cost, low-power solution for consum
2/2 Transceiver Half IEEE 1394 64-HTQFP (10x10)
SOP16
Maxim Integrated
03+
Description: Dual RS-232 Line Driver/Receiver Features: - Low Supply Current: 5.5mA - Low Input/Output Capacitance: 5pF - Low Input/Output Leakage: 0.1μA - Low Input/Output Offset Voltage: 0.3V - Low
IC TRANSCEIVER FULL 2/2 16SOIC
SOP-8
Microchip Technology
0817+
Description: The MCP2551-E/SN is a high-speed CAN, Controller Area Network, tranceiver from Microchip. It is designed to provide robust communication links for automotive, industrial, medical, and oth
IC TRANSCEIVER HALF 1/1 8SOIC
SOP-8
Texas Instruments
06
Parameter Symbol Conditions Min Typ Max Unit Supply Voltage VCC 4.75 5.25 V Output Voltage High VOH IO = -4mA 3.9 V Output Voltage Low VOL IO = 16mA 0.4 V Input Current (High) IIH V
生産の専門家を停止し、生産を停止し、見つけるのが難しい多数の電子部品を提供し、メンテナンス会社を促進することができます
在庫
フリーダイヤル
(888) 766 5577 USA & カナダ
+52 5515436027
+52 5515436028 メキシコ
+49 6931090199 ドイツ
国際支払
グローバルロジスティクス
1.2 Million+ Like Utsource
Required
