≥1:
US $6.82000
UTSOURCE()サイトは、ここをクリック
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ アドレスの追加
新運送先
*追跡情報を時間内に受信できるように、携帯電話番号を正しく入力してください。
国コード検索結果フィルタ:
DIP16
On/mot
00+
The MC3479P is a dual full-bridge motor driver integrated circuit (IC) designed for use in motion control applications. It is manufactured by ON Semiconductor and comes in a 16-pin dual in-line packag
Stepper Motor Driver
SOP-20
STMicroelectronics
08+
Description: The L297D is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and bipolar stepping motors. Features: Dual full-bridge driver High output current
The L297D is a Stepper Motor Controller IC generates 4-phase drive signals for 2-phase bi-polar and 4-phase uni-polar step motors in micro-computer controlled applications. The motor can be driven in half step, normal and wave drive modes and on-chip PWM chopper circuits permit switch-mode control of the current in the windings. A feature of this device is that it requires only clock, direction and mode input signals. Since the phase are generated internally the burden on the microprocessor and the programmer, is greatly reduced. This can be used with monolithic bridge drives such as the L298N
SOP8
Texas Instruments
15+
Description: The DRV8872 is a dual-channel H-bridge motor driver IC designed to drive two brushed DC motors. Features: - Operating voltage range: 4.5 V to 36 V - Output current: 2 A (peak) - Internal
IC MOTOR DRVR UNIPLR 8SO PWRPAD
HSOP20
STMicroelectronics
12+
Description: STMicroelectronics L9958 is a high-side power switch IC with integrated protection features. Features: High-side power switch Over-current protection Over-temperature protection Short
Low RDSON SPI controlled H-Bridge
SOP48
Freescale
11+12+
Description: MCZ33937EK is a low-voltage, low-power, high-speed, low-saturation, low-dropout linear regulator from Freescale. Features: Low quiescent current: 0.4mA Low dropout voltage: 0.2V Outpu
PRE-DRIVER 3PHASE 54-SOIC
SOP-24
On/mot
05+
Part Description: MC33035DW is an integrated circuit manufactured by ON Semiconductor. It is a low-side current-sensing IC that provides accurate current sensing from 0–1.5A. Features: Low-side cur
BRUSHLESS DC MOTOR CONTROLLER
SOP-24
Allegro
08+
Description: The A3973SLB is a complete microstepping motor driver with built-in translator for easy operation. It is designed to operate bipolar stepper motors in full-, half-, quarter-, and eighth-s
DUAL DMOS FULL-BRIDGE MICROSTEPPING PWM MOTOR DRIVER
DIP-24
STMicroelectronics
Description: The L6227N is a monolithic integrated circuit in a DIP-24 package, designed for use in the control and drive of two-phase bipolar stepping motors. Features: - Output current up to 2.5A -
DUAL DMOS FULL BRIDGE MOTOR DRIVER
ZIP-25
Toshiba America Electronic Components
Description: The TB6600HG is a bipolar stepper motor driver IC from Toshiba America Electronic Components. It is a high-performance, low-voltage driver IC for two-phase bipolar stepper motors. Feat
IC MTR DRVR BIPOLAR 8-42V 25HZIP
DIP-24
Allegro
00+
Parameter Symbol Min Typ Max Unit Supply Voltage VCC 8.0 - 40.0 V Logic Input Voltage VLOGIC 2.7 - 5.5 V Operating Temperature TOPR -40 - 150 °C Storage Temperature TSTG -65 - 150 °C Ma
DMOS FULL-BRIDGE PWM MOTOR DRIVER
SOP-20
STMicroelectronics
11+
Description: The L9904 is a monolithic integrated circuit made by STMicroelectronics. It is a dual-channel high-side driver with integrated power MOSFETs. Features: Dual-channel high-side driver I
MOTOR BRIDGE CONTROLLER
SOP-20
STMicroelectronics
Description: L6205PD is a full bridge motor driver IC, manufactured by STMicroelectronics. It is designed to drive two DC motors in a wide range of applications, such as automotive, industrial, and co
DMOS DUAL FULL BRIDGE DRIVER
SOP-20
Motorola
08+
Description: The MC33887DH is a high-performance, high-voltage, high-current, three-phase motor driver integrated circuit (IC). Features: High-voltage, high-current, three-phase motor driver Integr
5.0 A H-Bridge with Load Current Feedback
DIP-20
STMicroelectronics
Description: The L6205N is a full bridge motor driver IC from STMicroelectronics. Features: Output current up to 2A Supply voltage range from 8V to 45V Internal thermal shutdown Internal
DMOS DUAL FULL BRIDGE DRIVER
ZIP-23
Sanken Electric
04+
Description: The SLA7077MR is a bipolar stepping motor driver IC manufactured by Sanken Electric Co., Ltd. It is designed to drive two-phase bipolar stepping motors with a maximum current of 2.5A. Fe
Motor Driver IC Family
DIP-16
Allegro
Parameter Symbol Min Typical Max Unit Supply Voltage VCC 8 - 50 V Standby Current ISB - 10 - μA Operating Temperature Range Toper -40 - 125 °C Storage Temperature Range Tstg -65 - 150 °C
DUAL FULL-BRIDGE PWM MOTOR DRIVER
SIP-9
ROHM Semiconductor
04+
The BA6956AN is a 9-pin SIP (Single In-line Package) integrated circuit manufactured by ROHM. It is a dual full-bridge motor driver IC designed for use in driving small DC motors. Description: The BA
Silicon Monolithic Intergrated Circuit(Reversible Motor Driver)
SSOP-36
Allegro Microsystems
00+
The A3935KLQ is an integrated circuit (IC) from Allegro MicroSystems. It is a high-performance, low-cost, three-phase brushless DC motor driver IC. It is designed to drive brushless DC motors in a wid
Automotive Power MOSFET Controller
On Semiconductor
Description: The STK621-033D-E is a 3-phase brushless motor driver IC from ON Semiconductor. It is a high-performance, low-cost, low-voltage motor driver IC designed to drive 3-phase brushless motors.
Motor Driver
SOP-16
Allegro
07+
Description: The A3955SLBTR-T is a monolithic integrated circuit designed for use in motion control applications such as stepper motor control. It is a full bridge microstepping driver that is capable
LEAD FREE A3955SLB-T WITH TAPE & REEL
生産の専門家を停止し、生産を停止し、見つけるのが難しい多数の電子部品を提供し、メンテナンス会社を促進することができます