SN74ALS638AN
DIP-20
Texas Instruments
02+
OCTAL BUS TRANSCEIVERS
Utsource sitesine girmek için Buraya Tıklayın
Merhaba! Oturum aç veya Şimdi kaydolun
APP Veri sayfası 380K likes UtsourceOturum aç
Satın Al(0)
Sorgulama(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Adres Ekle
Yeni Gönderi Adresi
* Takip bilgilerini zamanında alabileceğinizden emin olmak için lütfen cep telefonu numarasını doğru bir şekilde doldurun.
Ülke KoduArama sonuçları filtresi:
Ana sayfa > Elektrik bileşeni > IC Yongaları > Mantık - Tamponlar Sürücüler Alıcılar Telsizler
DIP-20
Texas Instruments
SN74ALS639AN is a 20-pin DIP (dual in-line package) integrated circuit (IC) manufactured by Texas Instruments (TI). It is a high-speed 8-bit bidirectional universal shift register. Description: The S
These octal bus transceivers are designed for asynchronous two-way communication between open-collector and 3-state buses. The devices transmit data from the A bus (open-collector) to the B bus (3 state) or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable () input can be used to disable the device so the buses are isolated. The -1 version of SN74ALS638A is identical to the standard version, except that the recommended maximum IOL is increased to 48 mA. The SN74ALS638A, SN74ALS639A, SN74AS638A, and SN74AS639 are characterized for operation from 0°C to 70°C.
DIP-24750PCS
Texas Instruments
Universal shift / storage registers 20-SOIC 0 to 70
DIP-16
Motorola
3.3V LDO + Dual Switch For USB Peripherals, Active-High Enables 8-MSOP-PowerPAD -40 to 85
DIP
National Semiconductor
Parameter Description Min Typ Max Unit Supply Voltage (VCC) Operating supply voltage range 4.75 - 5.25 V Output High Level Voltage (VOH) Voltage at output when high - 2.4 - V (at IOH = -0.4 m
Octal 3-STATE Bus Transceivers
SOP-20
National Semiconductor
Description: Octal Bus Transceiver with 3-State Outputs Features: - Low power TTL compatible - High output drive capability - Outputs source/sink 24 mA - Bus hold data inputs eliminate the
3-STATE Octal Bus Transceiver
DIP24
Texas Instruments
Description: The 74ACT11240NT is a high-speed CMOS octal buffer/line driver with 3-state outputs. Features: High-speed performance: tpd = 8.5 ns (typical) at VCC = 5.0 V Low power consumption: ICC
OCTAL BUFFER/LINE DRIVER WITH 3-STATE OUTPUTS
DIP-20
National Semiconductor
Octal Buffer/Line Driver with 3-STATE Outputs; Package: DIP; No of Pins: 20; Container: Rail
DIP
Motorola
Hex Buffer with Enable; Package: PDIP-16; No of Pins: 16; Container: Rail; Qty per Container: 25
DIP20
Texas Instruments
Hex Buffer; Package: SOIC 14 LEAD; No of Pins: 14; Container: Tape and Reel; Qty per Container: 2500
DIP16
Texas Instruments
Parameter Symbol Min Typ Max Unit Supply Voltage VCC 2.0 - 6.0 V Input Low Voltage VIL - - 1.5 V Input High Voltage VIH 3.5 - - V Output Low Voltage VOL - 0.1 0.4 V Output High Voltage
HEX BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS
DIP-24
Texas Instruments
The SN74BCT25244NT is a 24-pin DIP (Dual In-line Package) buffer/line driver from Texas Instruments. It is a high-speed, low-power, low-voltage, octal buffer/line driver with 3-state outputs. It is de
25-ohm OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS
DIP-14
Texas Instruments
Parameter Symbol Min Typical Max Unit Conditions Supply Voltage VCC 2.0 - 6.0 V - Input Low Voltage VIL - 0.8 - V VCC = 4.5V to 5.5V Input High Voltage VIH - 2.0 - V VCC = 4.5V to 5.5V Ou
Single Non Inverting Buffer, 3-State ; Package: SC-88A, SOT-353, SC-70 5 LEAD; No of Pins: 5; Container: Tape and Reel; Qty per Container: 3000
Üretimi durdurma uzmanları, bakım şirketini kolaylaştırmak için üretimi durdurulmuş ve bulunması zor olan çok sayıda elektronik bileşen sağlayabiliriz