Utsource 사이트에 들어가려면 여기를 클릭하세요
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ 주소추가
새로운화물운송주소
* 추적 정보를 제때받을 수 있도록 휴대폰 번호를 정확하게 입력하십시오.
국가 코드
Utsource
SOP20
Fairchild
05+
Description: 74F377SJ is a 20-pin SOP (Small Outline Package) logic device manufactured by Fairchild Semiconductor. It is a 4-bit register with 3-state outputs. Features: 4-bit register with 3-state
Octal D-type Flip-flop With Clock Enable
DIP-16
HAR
99+
Parameter Symbol Conditions Min Typ Max Unit Supply Voltage VCC Continuous operation 3.0 - 18 V Input Low Voltage VIL VCC = 5V 0.8 - 1.5 V Input High Voltage VIH VCC = 5V 3.5 - 5.0 V Outp
4-Bit D-Type RegistersD
DIP20
Ns/fsc
Parameter Symbol Conditions Min Typ Max Unit Supply Voltage VCC Operating 4.75 5.0 5.25 V Input Voltage (High Level) VIH VIL ≤ VIH ≤ VCC 2.0 - VCC V Input Voltage (Low Level) VIL 0 ≤ VIL ≤
Quad Buffer with 3-STATE Outputs; Package: SOIC; No of Pins: 14; Container: Rail
SOP-14
Ns/fsc
Description: The MM74HC74AM is a dual D-type flip-flop with set and reset inputs. It is a high-speed, low-power, dual-in-line CMOS device. Features: High-speed operation Low-power consumption High
1.5 A 280kHz/560kHz Boost Regulators; Package: SOIC-8 Narrow Body; No of Pins: 8; Container: Rail; Qty per Container: 98
DIP14
National Semiconductor
Description: The DM7473N is a dual 4-bit static flip-flop with common Clock and Master Reset. Features: - Inputs include Clock, Master Reset, Set and Reset for each flip-flop - Outputs from each flip
Dual Master-Slave J-K Flip-Flops with Clear and Complementary Outputs
N/A
RCA
02+
Parameter Symbol Conditions Min Typical Max Unit Supply Voltage VCC Operating 2.0 - 6.0 V Input Low Voltage VIL VCC = 4.5V to 5.5V 0.8 - - V Input High Voltage VIH VCC = 4.5V to 5.5V - - 2.
High Speed CMOS Logic Octal D-Type Flip-Flop, Three-State Positive-Edge Triggered
DIP-16
National Semiconductor
Description: Dual JK Flip-Flop Features: - Low power Schottky TTL (LSTTL) - Inputs compatible with standard TTL outputs - Outputs source/sink 24 mA - Typical propagation delay: 8 ns - Typical p
Dual J-K Flip-Flops with Clear and Preset
DIP-16
FSC
0516+
Parameter Symbol Conditions Min Typ Max Unit Supply Voltage VCC Operating 4.75 5.0 5.25 V Input Low Voltage VIL Input 0.0 - 0.8 V Input High Voltage VIH Input 2.0 - VCC V Output Low Volta
16-Bit Buffer/Line Driver with 3-STATE Outputs; Package: SSOP; No of Pins: 48; Container: Tape & Reel
TSSOP-16
Fairchil
04+
Description: Quad D-Type Flip-Flop Features: Low Power Consumption Low Input Current High Noise Immunity High Speed Performance Outputs Source/Sink 24 mA Inputs Accept Voltages to 5
Quad D-Type Flip-Flop
SOP-16
Phil
99
Description: The 74HC175D is a high-speed CMOS logic quad D-type flip-flop with reset. Features: - High speed: tpd = 8.0 ns (typical) at VCC = 5 V - Low power consumption: ICC = 4 μA (maximum) at Ta
DIP-14
Ti/mot
Description: The SN74LS73AN is a dual positive edge-triggered J-K flip-flop with individual J, K, clock, set and reset inputs, and complementary Q and Q outputs. Features: - Positive edge-triggere
500mA, 5V,±4% Tolerance, Negative Voltage Regulator, Ta = 0°C to +125°C; Package: TO-220, SINGLE GAUGE; No of Pins: 3; Container: Rail; Qty per Container: 50
SOP-20
Philips
0321+
Description: The 74HC574D is an 8-bit D-type flip-flop with 3-state outputs from NXP Semiconductors. Features: High-speed operation: tpd = 10 ns (typical) at VCC = 5 V Low power consumption: I
Octal D-type flip-flop; positive edge-trigger; 3-state
SOP-14
Ti/fsc/ns
01+
Package: SOP-14 Manufacturer: TI/FSC/NS Description: Dual D-Type Flip-Flop with Set and Reset Features: Low power Schottky TTL (LSTTL) Inputs accept voltages up to 5.5V Outputs sour
Dual D-Type Positive Edge-Triggered Flip-Flop
SOP-14
FSC
06+
Description: The 74AC74SJ is a dual D-type flip-flop with separate data (D) and clock (CP) inputs. Features: High-speed performance Low power consumption Outputs source/sink 24 mA Inputs
Dual D-Type Positive Edge-Triggered Flip-Flop
DIP-14
National Semiconductor
Parameter Symbol Conditions Min Typ Max Unit Supply Voltage VCC Operating 4.75 5.0 5.25 V Input Voltage (High) VIH Input High Level 3.15 - 5.25 V Input Voltage (Low) VIL Input Low Level 0 -
Dual D Positive-Edge-Triggered Flip-Flops with Preset and Clear; Package: DIP; No of Pins: 14; Container: Rail
DIP-20
Fsc/ns
02+
Description: The DM74LS273N is a 20-pin dual J-K flip-flop with reset. Features: High-Speed Operation Low Power Consumption TTL Compatible Inputs and Outputs Direct Clear Input Outputs Source/Si
Quad 2-Input NAND Gate; Package: SOP; No of Pins: 14; Container: Tape & Reel
SOP-14
04+
Description: Dual D-Type Flip-Flop Features: - High-Speed Operation - Low Power Consumption - Outputs Source/Sink 24 mA - 5V Tolerant Inputs - CMOS Compatible Inputs - Outputs Directly Interfa
Dual D-type flip-flop with set and reset; positive-edge trigger
DIP-14
National Semiconductor
The 74C74 is a dual D-type flip-flop with a clock and clear inputs. It is a 14-pin dual in-line package (DIP-14) manufactured by Texas Instruments (TI) and National Semiconductor (NS). Description: T
IC FF D-TYPE DUAL DIE
생산 전문가 중지, 우리는 유지 보수 회사를 용이하게하기 위해 생산이 중단되고 찾기 어려운 많은 전자 부품을 제공 할 수 있습니다
재고
수신자 부담 전화
(888) 766 5577 USA & 캐나다
+52 5515436027
+52 5515436028 멕시코
+49 6931090199 독일
글로벌 결제
글로벌 물류
1 Million+ Like Utsource
Required
