≥1:
US $0.81840
Utsource 사이트에 들어가려면 여기를 클릭하세요
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ 주소추가
새로운화물운송주소
* 추적 정보를 제때받을 수 있도록 휴대폰 번호를 정확하게 입력하십시오.
국가 코드DIP14
Texas Instruments
07+
SN74LS74AN is a dual positive-edge triggered D-type flip-flop with individual data (D) and clock (CP) inputs. It is a 14-pin dual in-line package (DIP) manufactured by Texas Instruments. Description:
These devices contain two independent D-type positive-edge-triggered flip-flops. A low level at the preset or clear inputs sets or resets the outputs regardless of the levels of the other inputs. When preset and clear are inactive (high), data at the D input meeting the setup time requirements are transferred to the outputs on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not directly related to the rise time of the clock pulse. Following the hold time interval, data at the D input may be changed without affecting the levels at the outputs. The SN54' family is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74' family is characterized for operation from 0°C to 70°C.
DIP-14
FSC
Description: The CD4013BCN is a dual D-type flip-flop with set and reset. Features: Set and reset Clock inhibit Low power consumption High noise immunity High speed operation High
Dual D-type Flip-flop
DIP-16
Ti/hit
Description: The SN74LS76AN is a dual J-K flip-flop with set and reset inputs. Features: - Wide supply voltage range: 3V to 15V - Low power consumption - High speed operation - High noise immunity -
Dual J-k Flip-flop With Set & Clear, Package: Pdip, Pins=16
DIP-14
National Semiconductor
84+
Description: Dual J-K Flip-Flop Features: - Dual J-K flip-flop with common clock and common reset - Inputs include clock, reset, J, K, set and clear - Outputs include Q and Q - Outputs sou
Dual J-K Flip-Flops with Clear and Preset
DIP20
National Semiconductor
Description: Octal D-Type Flip-Flop with 3-State Outputs Features: - 8-bit D-type flip-flop - 3-state outputs - Outputs source/sink 24 mA - Outputs are TTL compatible - Inputs accept TTL levels
3-STATE Octal D-Type Latch . 3-STATE Octal D-Type Flip-Flop
DIP20
Ns/fsc
Parameter Symbol Conditions Min Typ Max Unit Supply Voltage VCC Operating 4.75 5.0 5.25 V Input Voltage (High Level) VIH VIL ≤ VIH ≤ VCC 2.0 - VCC V Input Voltage (Low Level) VIL 0 ≤ VIL ≤
Quad Buffer with 3-STATE Outputs; Package: SOIC; No of Pins: 14; Container: Rail
DIP-20
National Semiconductor
Description: The 74F574PC is a high-speed, low-power, octal D-type flip-flop with 3-state outputs. Features: - High-speed performance: tpd = 6.5 ns (typical) at VCC = 5V - Low-power consumption: ICC
Octal D-Type Flip-Flop with 3-STATE Outputs; Package: DIP; No of Pins: 20; Container: Rail
DIP-14
National Semiconductor
Description: The MM74C74N is a dual D-type flip-flop with individual data, set, reset, and clock inputs and Q and Q outputs. Features: Positive-edge triggered Individual data, set, reset, and cloc
Dual D-Type Flip-Flop
N/A
RCA
02+
Parameter Symbol Conditions Min Typical Max Unit Supply Voltage VCC Operating 2.0 - 6.0 V Input Low Voltage VIL VCC = 4.5V to 5.5V 0.8 - - V Input High Voltage VIH VCC = 4.5V to 5.5V - - 2.
High Speed CMOS Logic Octal D-Type Flip-Flop, Three-State Positive-Edge Triggered
DIP-16
Texas Instruments
Description: Dual J-K Flip-Flop Features: - Inputs Include Clocks, Set, Reset, and Direct Clear - Outputs Source/Sink 24 mA - Fanout of 10 LSTTL Loads - Balanced Propagation Delay and Transition Times
500mA, 5V,±2% Tolerance, Voltage Regulator, Ta = 0°C to +125°C; Package: DPAK 4 LEAD Single Gauge Surface Mount; No of Pins: 4; Container: Tape and Reel; Qty per Container: 2500
DIP-16
National Semiconductor
Description: Dual JK Flip-Flop Features: - Low power Schottky TTL (LSTTL) - Inputs compatible with standard TTL outputs - Outputs source/sink 24 mA - Typical propagation delay: 8 ns - Typical p
Dual J-K Flip-Flops with Clear and Preset
DIP-16
FSC
0516+
Parameter Symbol Conditions Min Typ Max Unit Supply Voltage VCC Operating 4.75 5.0 5.25 V Input Low Voltage VIL Input 0.0 - 0.8 V Input High Voltage VIH Input 2.0 - VCC V Output Low Volta
16-Bit Buffer/Line Driver with 3-STATE Outputs; Package: SSOP; No of Pins: 48; Container: Tape & Reel
SOP-14
FSC
00+
Description: The CD4013BCM is a dual D-type flip-flop with a common Clock (CP) and Master Reset (MR) inputs. Features: High noise immunity Low power consumption Outputs source/sink 24 mA High-spe
Dual D-Type Flip-Flop; Package: SOIC; No of Pins: 14; Container: Rail
SOP-20
Philips
0321+
Description: The 74HC574D is an 8-bit D-type flip-flop with 3-state outputs from NXP Semiconductors. Features: High-speed operation: tpd = 10 ns (typical) at VCC = 5 V Low power consumption: I
Octal D-type flip-flop; positive edge-trigger; 3-state
DIP-14
National Semiconductor
Parameter Symbol Conditions Min Typ Max Unit Supply Voltage VCC Operating 4.75 5.0 5.25 V Input Voltage (High) VIH Input High Level 3.15 - 5.25 V Input Voltage (Low) VIL Input Low Level 0 -
Dual D Positive-Edge-Triggered Flip-Flops with Preset and Clear; Package: DIP; No of Pins: 14; Container: Rail
DIP-14
National Semiconductor
The 74C74 is a dual D-type flip-flop with a clock and clear inputs. It is a 14-pin dual in-line package (DIP-14) manufactured by Texas Instruments (TI) and National Semiconductor (NS). Description: T
IC FF D-TYPE DUAL DIE
DIP-14
Motorola
05+
Description: Dual D-Type Flip-Flop Features: - High Speed Operation - Low Power Consumption - Input Clamp Diodes - Outputs Source/Sink 24 mA - Outputs Directly Interface to CMOS, NMOS and
Quad 2-Input NAND Gate with LSTTL-Compatible Inputs
생산 전문가 중지, 우리는 유지 보수 회사를 용이하게하기 위해 생산이 중단되고 찾기 어려운 많은 전자 부품을 제공 할 수 있습니다