¡Hola! Acceder o Registrarse
APP Manual de datos Transmisión en vivo 290K likes UtsourceComprar(0)
Pida su cotización(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Añadir dirección
Nueva dirección de transporte
* Por favor, complete el número de teléfono celular correctamente para asegurarse de que puede recibir la información de seguimiento a tiempo.
Código de país
Favorita
Utsource certified used parts
Las piezas usadas certificadas por Utsource ofrecen las siguientes garantías:
1. Utsource inspeccionará los productos, incluida la inspección de apariencia (sin daños serios en la apariencia), seleccionará proveedores calificados y honestos, y asegurará una tasa de calificación del 98%.
2. Algunas partes son probadas por la máquina.
3. Las piezas certificadas de Utsource pueden devolverse y reembolsarse incondicionalmente dentro de los 60 días.
Descripción de producto
SmartSocket 256k
Todos los nombres de productos, marcas registradas, marcas y logotipos utilizados en este sitio son propiedad de sus respectivos dueños. La representación, descripción o venta de productos con estos nombres, marcas comerciales, marcas y logotipos es solo para fines de identificación y no pretende indicar ninguna afiliación o autorización por parte de ningún titular de derechos.
Description
The DS1213C SmartSocket is a 28-pin, 600 mil DIP socket with a built-in CMOS controller circuit and an embedded lithium energy source. It accepts a 32K x 8 JEDEC bytewide CMOS static RAM. When the socket is mated with a CMOS RAM, it provides a complete solution o problems associated with memory volatility. The SmartSocket monitors incoming VCC for an out-of- tolerance condition. When such a condition occurs, the internal lithium energy source is automatically switched on and write protection is unconditionally enabled to prevent data corruption.
Using the SmartSocket saves printed circuit board space since the SRAM/SmartSocket combination occupies no more area than the memory alone. The SmartSocket uses only Pins 20 and 28 for RAM control. All other pins are passed straight through. See the DS1213B SmartSocket data sheet for technical details.
DS1213C description
The DS1213C SmartSocket is a 28-pin, 600mil dual in-line package socket with a built-in Complementary Metal Oxide Semiconductor (CMOS) controller circuit and an embedded lithium energy source which is manufactured by Maxim integrated company. It allows a 32k x 8 JEDEC byte wide CMOS static RAM. When the socket DSC1213C is mated with a CMOS RAM, it provides a comprehensive solution of problems associated with memory volatility. This device monitors the incoming Vcc for an out-of-tolerance condition. When a condition like that happens, the internal lithium energy source is automatically going to the switching ON condition and write protection is unconditionally enabled to avoid the corruption of data.
DS1213C Pin Configuration
When we are using the DSC1213C SmartSocket, it saves the space in the printed circuit board since the SRAM/SmartSocket combination inhabits no more area than the memory alone. The DSC123C SmartSocket takes only Pins 20 and 28 for the controlling of RAM. All the other remaining pins are passed straight through.
DS1213C Features
Some of the key features of this device are given below.
· Standard 32k x 8 CMOS static RAMs are accepted.
· Embedded lithium energy cell which will keep RAM data
· Self-contained circuitry which safeguards the data
· With the proper RAM selection data retention time will be greater than 10 years.
· Fully optimized gas-tight socket contacts
· Operating temperature range 0℃ to 70℃
Function of DS1213C
The SmartSocket DS1213C performs five circuit functions necessary for implementing battery backup on a CMOS memory. The first function is the device has a switch that is provided to direct power from the battery or Vcc supply, depending on which is greater. This switch has a voltage drop which will not exceed 0.2V. The second function is power fail detection at input voltages less than 4.75V.DS1213C constantly monitors the Vcc supply. When Vcc falls below 4.75V, a precision comparator detects the condition and inhibits the enabling of the RAM chip.
The third function accomplishes write protection by holding the chip enable signal to the memory to within 0.2V of Vcc or battery supply. If the chip enables signal is active at the time power fail detection occurs, write protection is delayed until after the memory cycle is complete to avoid corruption of data. During nominal power supply conditions, the memory chip enables signal will be passed through to the socket receptacle with a maximum propagation delay of 20 nanoseconds.
The SmartSocket’s fourth function is to check battery status and warn of potential data loss. Each time that Vcc power is restored to the SmartSocket, the battery voltage is compared with a precision comparator. If the battery supply is below 2.0V, the second memory cycle is inhibited. Battery status can therefore be determined by performing a read cycle after powerup to any location in the memory recording the contents of that memory location. A subsequent write cycle can then be executed to the same memory location changing the data. If the next read cycle fails to verify the written data, the contents of the memory are questionable because the battery may not have retained it.
The fifth function is battery redundancy. In many applications data integrity is paramount. The DS1213C has internal batteries. During the battery backup time the battery with the highest voltage is selected for use. If one battery dies, the other automatically takes over. The switch between batteries is transparent to the user. A battery status warning occurs only if both batteries are less than 2.0V. Each of the two lithium cells contains 35mA per hour capacity.
DS1213C Applications
The DS1213C SmartSocket is outdated now, this can be replaced mostly using a pin-compatible, equivalent-density 5V NV SRAM DS1230 module. Below are some of its applications.
· Motor vehicle crash boxes
· Data logging applications
· Some medical equipment’s and high-end servers which needs to store data
5V NV SRAMDS1230 Which replaces DS1213C
Vista previa de las 3 primeras páginas de la ficha técnica
Algún número de pieza del mismo fabricante
Misma categoría
2011 reseñas de compradores de Spain
Kenneth Harris
Length of registration:7 years
I recently tested the Utsource DS1213C integrated circuit and was very pleased with the results. The circuit was easy to install and worked flawlessly. The circuit was well designed and provided reliable performance. I was also impressed with the quality of the components and the overall build quality of the circuit. I would highly recommend this product to anyone looking for a reliable and cost-e
0
0
Responder0
03/17/2023
Método de pago europeo
Método de pago asiático
Método de pago americano
Método de pago internacional
Pedido
Pago
Transporte de mercancía
Cupón Regalo/Servicio Plus
Retorno de mercancías
Normalmente se aceptan devoluciones cuando se completan dentro de los 60 días a partir de la fecha de entrega del paquete.
Defectuoso (proporcione un informe de calidad de terceros de productos no conformes)
Los gastos de devolución deben ser prepagos; No aceptaremos envíos contra reembolso.
Politica de garantía
Todas las compras de UTSOURCE tienen una política de devolución de dinero de 60 días, más una garantía de UTSOURCE de 90 días contra cualquier defecto de fabricación. Esta garantía no se aplicará a ningún artículo donde los defectos hayan sido causados por un montaje incorrecto del cliente, el incumplimiento del cliente de seguir las instrucciones, la modificación del producto , operación negligente o inadecuada.
DS1213C
DS1213C tiene varias marcas en todo el mundo que pueden tener nombres alternativos para DS1213C debido a diferencias o adquisiciones regionales. DS1213C también se conoce con los siguientes nombres:
OPCIONES DE COMPRA
Estado de existencia: 5000
Mínimo: 1
Precio Total:
Precio unitario:11.80541
UTSOURCE
País:
United States
Correo Express: (FEDEX, UPS, DHL, TNT)Envío gratuito para los primeros 0.5kg para pedidos superiores a €181.82,cargos adicionales por peso superior
JudyGerente de personalización
sales@utsource.com
(888) 766 5577
+86 15302769052
+1 (312)899-4831
(whatsapp only)
Su dedicado servicio al cliente, brindándole el mejor servicio en cualquier momento.
3 vendedores Elecciones
Detener a los expertos en producción, podemos proporcionar una gran cantidad de componentes electrónicos que se han detenido y que son difíciles de encontrar para facilitar la empresa de mantenimiento.
Reply to
submit