≥1:
€0.65869
Bonjour! Se connecter ou Inscrivez-vous immédiatement
APP Fiche technique Direct 290K likes UtsourceSe connecter
acheter(0)
Demandes d'offres (0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Ajouter l'adresse
Nouvelle adresse de transport
* Veuillez remplir correctement le numéro de téléphone portable pour vous assurer que vous pouvez recevoir les informations de suivi à temps.
Code paysFiltrer les résultats de recherche:
Accueil > Composants Électroniques > Puces CI > Logique - Flip Flops
Package: SOP-14 Manufacturer: NS/FSC Description: The 74ACT74 is a dual D-type flip-flop with individual data, set, reset, and clock inputs, and complementary Q and Q outputs. Features: High speed:
En stock:10000
Minimum:5
Favoris
DIP14
Texas Instruments
07+
These devices contain two independent D-type positive-edge-triggered flip-flops. A low level at the preset or clear inputs sets or resets the outputs regardless of the levels of the other inputs. When preset and clear are inactive (high), data at the D input meeting the setup time requirements are transferred to the outputs on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not directly related to the rise time of the clock pulse. Following the hold time interval, data at the D input may be changed without affecting the levels at the outputs. The SN54' family is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74' family is characterized for operation from 0°C to 70°C.
SN74LS74AN is a dual positive-edge triggered D-type flip-flop with individual data (D) and clock (CP) inputs. It is a 14-pin dual in-line package (DIP) manufactured by Texas Instruments. Description:
En stock:10000
Minimum:3
Favoris
Description: The CD4013BCN is a dual D-type flip-flop with set and reset. Features: Set and reset Clock inhibit Low power consumption High noise immunity High speed operation High
En stock:10000
Minimum:4
Favoris
En stock:150
Minimum:100
Favoris
En stock:235
Minimum:100
Favoris
DIP
Texas Instruments
01+
LMC7101 Tiny Low Power Operational Amplifier with Rail-To-Rail Input and Output; Package: SOT-23; No of Pins: 5
En stock:10000
Minimum:1
Favoris
Favoris
DIP-14
National Semiconductor
93+
Dual D-Type Positive Edge-Triggered Flip-Flop; Package: DIP; No of Pins: 14; Container: Rail
Description: The 74F74PC is a dual D-type flip-flop with a positive-edge trigger. Features: High speed Low power consumption Outputs source/sink 24 mA Inputs compatible with TTL levels Outputs
En stock:10000
Minimum:3
Favoris
En stock:10000
Minimum:3
Favoris
SN74HC175N is a Quad D-type flip-flop IC with a DIP-16 package manufactured by Texas Instruments. It is a high-speed CMOS logic device that is designed for low-power operation. Description: The SN74H
En stock:10000
Minimum:2
Favoris
En stock:10000
Minimum:2
Favoris
Description: The 74HC574D is an 8-bit D-type flip-flop with 3-state outputs from NXP Semiconductors. Features: High-speed operation: tpd = 10 ns (typical) at VCC = 5 V Low power consumption: I
En stock:10000
Minimum:4
Favoris
Description: Dual D-Type Flip-Flop with Preset and Clear Features: - High-speed operation - Low power consumption - Inputs accept voltages up to 5.5V - Outputs source/sink 24mA - Outputs compatible wi
En stock:331
Minimum:26
Favoris
En stock:10000
Minimum:16
Favoris
SOP-20
Texas Instruments
0244+
Dual D-type Positive Edge-triggered Flip-flop
Description: Octal D-Type Flip-Flop with Clear Features: - Inputs Include Clamp Diodes - Outputs Source/Sink 24 mA - Outputs Directly Interface to CMOS, NMOS and TTL - Input Clamping Diodes Simpl
En stock:10000
Minimum:3
Favoris
DIP-16
Motorola
99+
Hex D-Type Master-Slave Flip-Flop; Package: PDIP-16; No of Pins: 16; Container: Rail; Qty per Container: 25
En stock:10000
Minimum:2
Favoris
Description: Dual D-Type Flip-Flop Features: - High-Speed Operation - Low Power Consumption - Outputs Source/Sink 24 mA - 5V Tolerant Inputs - CMOS Compatible Inputs - Outputs Directly Interfa
En stock:10000
Minimum:5
Favoris
20-SOIC (0.209", 5.30mm Width)
Texas Instruments
Dual D-type Positive Edge-triggered Flip-flop
En stock:10000
Minimum:2
Favoris
En stock:10000
Minimum:2
Favoris
Description: Octal D-Type Flip-Flop with Clear Features: High-speed: tpd = 8.3 ns (typical) at VCC = 5 V Low power consumption: ICC = 4 μA (maximum) at Ta = 25°C Fully static operation Synchronous
En stock:10000
Minimum:3
Favoris
Experts en arrêt de production, nous pouvons fournir un grand nombre de composants électroniques dont la production a été arrêtée et qui sont difficiles à trouver, pour faciliter l'entreprise de maintenance