Bonjour! Se connecter ou Inscrivez-vous immédiatement
APP Fiche technique Direct 290K likes UtsourceSe connecter
acheter(0)
Demandes d'offres (0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Ajouter l'adresse
Nouvelle adresse de transport
* Veuillez remplir correctement le numéro de téléphone portable pour vous assurer que vous pouvez recevoir les informations de suivi à temps.
Code pays
Favoris
Utsource certified used parts
Les pièces d'occasion certifiées Utsource offrent les garanties suivantes:
1. Utsource inspectera les marchandises, y compris l'inspection de l'apparence (aucun dommage grave à l'apparence), sélectionnera des fournisseurs qualifiés et honnêtes et garantira un taux de qualification de 98%.
2. Certaines pièces sont testées par la machine.
3. Les pièces certifiées Utsource peuvent être retournées et remboursées sans condition dans les 60 jours.
Description du produit
This 8-bit noninverting bus transceiver uses two separate configurable power-supply rails. The SN74AVC8T245 is optimized to operate with VCCA/VCCB set at 1.4 V to 3.6 V. The device is operational with VCCA/VCCB as low as 1.2 V. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.2 V to 3.6 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, and 3.3-V voltage nodes.
The SN74AVC8T245 is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the outputs so the buses are effectively isolated.
The SN74AVC8T245 is designed so that the control pins (DIR and OE) are supplied by VCCA.
The SN74AVC8T245 solution is compatible with a single-supply system and can be replaced later with a ’245 function, with minimal printed circuit board redesign.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, thus preventing damaging current backflow through the device when it is powered down.
The VCC isolation feature ensures that if either VCC input is at GND, both ports are in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE shall be tied to VCC through a pullup resistor
the minimum value of the resistor is determined by the current-sinking capability of the driver.
Titre
8-Bit Dual-Supply Bus Transceiver with Configurable Voltage-Level Shifting and 3-State Outputs
Tous les noms de produits, marques commerciales, marques et logos utilisés sur ce site sont la propriété de leurs propriétaires respectifs. La description, la description ou la vente de produits comportant ces noms, marques, marques et logos est uniquement destinée à des fins d’identification et ne vise en aucun cas à indiquer une affiliation avec un détenteur des droits ou une autorisation de celui-ci.
Aperçu des 3 premières pages de la fiche technique
Aperçu du document
SN74AVC8T245 8-Bit Dual-Supply Bus Transceiver With Configurable Voltage Translation and 3-State Outputs
ESD Protection Exceeds JESD 8000-V Human-Body Model 200-V Machine Model 1000-V Charged-Device Model (C101)
Control Inputs VIH/VIL Levels Are Referenced to VCCA VoltageVCC Isolation Feature If Either VCC Input Is at GND, All I/O Ports Are in the High-Impedance State
Ioff Supports Partial Power-Down Mode Operation Fully Configurable Dual-Rail Design Allows EachPort to Operate Over the Full to 3.6-V Power-Supply Range I/Os Are 4.6-V Tolerant Maximum Data Rates 170 Mbps (VCCA V or VCCB 320 Mbps (VCCA 1.8 V and VCCB 1.8 V)
This 8-bit noninverting bus transceiver uses two separate configurable power-supply rails. The SN74AVC8T245 is optimized to operate with VCCA/VCCB set 3.6 V. The device is operational with VCCA/VCCB as low 1.2 V. The A port is designed to track VCCA. VCCA accepts any supply voltage from 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 3.6 V. This allows for universal low-voltage bidirectional translation between any of the 1.8-V, 2.5-V, and 3.3-V voltage nodes.
The SN74AVC8T245 is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the outputs so the buses are effectively isolated.
The SN74AVC8T245 is designed so that the control pins (DIR and OE) are supplied by VCCA.The SN74AVC8T245 solution is compatible with a single-supply system and can be replaced later with a '245 function, with minimal printed circuit board redesign.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, thus preventing damaging current backflow through the device when it is powered down.
The VCC isolation feature ensures that if either VCC input is at GND, both ports are in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE shall be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA.
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.Changed MAX value for Operating free-air temperature, TA from: 85°C to: : 5 Added values for +125°C in Electrical Characteristics and all Switching Characteristics tables : 6 Added Documentation Support section, Receiving Notification of Documentation Updates, and Community
Added Pin Configuration and Functions section, ESD Rating table, Feature Description section, Device Functional Modes, Application and Implementation section, Power Supply Recommendations section, Layout section, Device and Documentation Support section, and Mechanical, Packaging, and Orderable Information section : 1
DESCRIPTIONCertains numéros de pièce de la même fabrication
Même catégorie
433 avis d'acheteurs de France
Edouard
Length of registration:3 years
Arduino's great. Not expensive. Other details. Sold good
0
0
Réponse0
11/10/2022
Manuel Anastasi
Length of registration:1 years
Chip working! It arrived ahead of schedule and arrived in excellent condition very satisfied with the purchase.
0
0
Réponse0
11/08/2022
Juffroy
Length of registration:1 years
The are good headers, and stand up to soldering well. A good price for the bunch too.
0
0
Réponse0
10/10/2022
JEAN-LUC MARIETTE
Length of registration:1 years
Hi, for electronics products, I always get them from this website call Utsource. There is a lot of interesting product there. One of my favorite products is MB91F366GB. That is really amazing.!
0
0
Réponse0
09/29/2022
LERUS
Length of registration:1 years
ok
0
0
Réponse0
11/14/2017
SARDOU CHRISTINE
Length of registration:9 years
bien
0
0
Réponse0
04/11/2017
Pascal GEHIN
Length of registration:1 years
good product
0
0
Réponse0
12/08/2016
fils excellent
Length of registration:7 years
correct
0
0
Réponse0
11/19/2016
Mickael NAILLON
Length of registration:12 years
Good product
0
0
Réponse0
09/23/2016
DAGAUD Jacky
Length of registration:7 years
Livraison effectuée dans de bonnes conditions, parcours parfait et respecté. Merci pour le délai, la bonne qualité d'emballage et le conditionnement. TRES SERIEUX
0
0
Réponse0
09/18/2016
Mode de paiement Européen
Mode de paiement Asiatique
Mode de paiement Américain
Mode de paiement international
Commande
Paiement
Transport de marchandises
Coupon cadeau/service Plus
Retour
En règle générale, les retours sont acceptés lorsqu'ils sont effectués dans un délai de 60 jours à compter de la date de livraison du colis.
Produit défectueux (veuillez fournir un rapport de qualité d'un tiers sur la non conformité du produit)
Les frais de retour doivent être prépayés ; nous n'acceptons pas les envois contre remboursement.
Politique de garantie
Tous les achats effectués sur UTSOURCE bénéficient d'une politique de remboursement de 60 jours, en plus d'une garantie UTSOURCE de 90 jours pour tout défaut de fabrication. Cette garantie ne s'applique pas aux articles dont les défauts ont été causés par un assemblage incorrect par le client, le non-respect des instructions par le client, une modification du produit ou un usage négligent ou inapproprié du produit.
SN74AVC8T245PW
SN74AVC8T245PW possède plusieurs marques dans le monde entier qui peuvent avoir des noms alternatifs pour SN74AVC8T245PW en raison de différences régionales ou d'acquisitions. SN74AVC8T245PW peut également être connu sous les noms suivants
OPTIONS D'ACHAT
Pays:
United States
Express : (FEDEX, UPS, DHL, TNT)Livraison gratuite sur le premiers 0.5 kg à partir de €181.82 de commande,le surpoids sera facturé séparément
JudyResponsable Clientèle
sales@utsource.com
(888) 766 5577
+86 15302769052
+1 (312)899-4831
(whatsapp only)
Votre service client dédié, vous offrant le meilleur service à tout moment.
Experts en arrêt de production, nous pouvons fournir un grand nombre de composants électroniques dont la production a été arrêtée et qui sont difficiles à trouver, pour faciliter l'entreprise de maintenance
Reply to
submit