≥1:
US $2.59200
Buy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country CodeSearch results filter:
Home > Elec-component > IC Chips > Interface - Drivers, Receivers, Transceivers
Description: 8-Bit, High-Speed, Multiplying A/D Converter Features: 8-Bit Resolution Up to 500ksps Conversion Rate Low Power: 1.7mA (Typ) On-Chip Reference Single +5V Supply Low Cost 8-Lead SS
Stock:10000
Minimum:2
Favorite
Description: 3.3V, +5V Tolerant, RS-232 Transceivers with AutoShutdown Plus Features: Low Supply Current: 5.5mA (Typ) AutoShutdown Plus: Reduces Supply Current to 0.1μA (Typ) +5V Tolerant I/O Pins
Stock:10000
Minimum:1
Favorite
#PBF Description: The LTC1485IS8#PBF is a high-speed, low-power, 8-pin SOP (Small Outline Package) CMOS (Complementary Metal-Oxide Semiconductor) analog switch designed for use in a variety of applic
Stock:10000
Minimum:2
Favorite
Manufacturer: Maxim Integrated Package/Case: SSOP-24 Description: RS-232 Transceiver Features: Low Power Consumption: 4.5mA Max ±15kV ESD Protection on All Pins ±25kV EFT Protection on All Pi
Stock:10000
Minimum:1
Favorite
Stock:10000
Minimum:1
Favorite
DIP8
STMicroelectronics
2013
3.3V POWERED, 15KV ESD PROTECTED, TRASMIT AT UP TO 12MBPS TRUE RS-485/RS-422 TRANSCEIVER
Stock:10000
Minimum:2
Favorite
Stock:5000
Minimum:1
Favorite
Description: Half-Duplex RS-485 Transceiver Features: - High-Speed Data Rates up to 250 kbps - Low Power Consumption - Low Input and Output Capacitance - High ESD Protection - Low Skew - Slew R
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:1
Favorite
SOP
Texas Instruments
Quadruple Differential Line Receiver 27mW 16-Pin TSSOP T/R
Description: The AM26LV32EIPWR is a quad differential line driver designed for digital data transmission over balanced lines. It is designed to meet the requirements of ANSI TIA/EIA-422-B and ITU Reco
Stock:10000
Minimum:2
Favorite
Description: SP335EER1-L is a low-power, high-speed, low-skew, quad-channel RS-485/RS-422 transceiver. Feature: 1. Low-power operation 2. High-speed data rates up to 1 Mbps 3. Low-skew design 4. Quad-
Stock:10000
Minimum:1
Favorite
SOIC
Linear Technology
RS-485 Line Drivers and Receivers, Linear Technology Linear Technology’s RS485 standards are widely used in local networks as well as data transfer over long distances and they are ideal in industrial and commercial applications. The Profibus (Process Field Bus) protocol is carried out for fieldbus solutions in factory and process automation environments. The RS422 standard is similar to the RS485 standard but does not permit multiple drivers on a bus. The RS485 Transceiver (formally TIA-485) defines a differential data transmission up to 10Mbps.The low power CMOS RS485/RS422 Interface transceivers feature failsafe receivers, high voltage, high data rates, high ESD protection types and transceivers (TXRX) featuring pin-controlled switchable 120 Ohm termination resistors. Balanced line offers excellent noise rejection
The LTC2850IS8#PBF is an 8-pin SOIC (Small Outline Integrated Circuit) from Linear Technology. It is a dual-channel, low-power, high-speed CAN transceiver. The device is designed to interface between
Stock:10000
Minimum:2
Favorite
SOP-20
Texas Instruments
Triple Transmitter/Receiver RS-422/RS-485 20-Pin SOIC Tube
Description: The SN75ALS170ADW is a quad differential line receiver designed to meet the requirements of EIA-422-B and ITU Recommendation V.11. Features: Differential Inputs and Outputs High Inp
Stock:10000
Minimum:2
Favorite
Description: The LT1791AIS#PBF is a high voltage, low noise, low dropout linear regulator with a wide input voltage range of 4.5V to 80V. Features: Wide Input Voltage Range: 4.5V to 80V Low Dropout
Stock:5000
Minimum:1
Favorite
Stock:10000
Minimum:3
Favorite
Description: The AM26LS31CDRE4 is a Quad Differential Line Driver designed to meet the requirements of ANSI TIA/EIA-422-B and ITU Recommendation V.11. Features: Complies with TIA/EIA-422-B and ITU R
Stock:10000
Minimum:2
Favorite
Description: The SN65HVD231DG4 is a high-speed differential line transceiver from Texas Instruments. It is designed for bidirectional data communication on multipoint bus transmission lines. Featur
Stock:10000
Minimum:2
Favorite
SOP-16
Texas Instruments
0549+
DUAL RS-232 LINE DRIVER / RECEIVER WITH + -15KV ESD PROTECTION
Stock:10000
Minimum:2
Favorite
16-SOIC (0.209", 5.30mm Width)
Texas Instruments
1/1 Transceiver Full RS422, RS485 16-SO
Description: The SN751178NSRE4 is a low-power, high-speed, low-skew, quad differential line driver designed for applications such as high-speed data transmission over balanced lines. Features: Low
Stock:10000
Minimum:2
Favorite
Description: LTC1387CSW#PBF is a high-speed, low-power, low-noise, precision, rail-to-rail, CMOS operational amplifier. Features: Low Noise: 0.9nV/√Hz Low Power: 1.2mA/amplifier Rail-to-Rail Input
Stock:10000
Minimum:1
Favorite
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company