≥1:
US $9.86400
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ 주소추가
새로운화물운송주소
* 추적 정보를 제때받을 수 있도록 휴대폰 번호를 정확하게 입력하십시오.
국가 코드검색 결과 필터:
재고:5000
최소:1
즐겨 찾기
DIP24
Analog Devices
The AD7710 is a complete analog front end for low frequency measurement applications. The device accepts low level signals directly from a strain gage or transducer and outputs a serial digital word. It employs a sigma-delta conversion technique to realize up to 24 bits of no missing codes performance. The input signal is applied to a proprietary programmable gain front end based around an analog modulator. The modulator output is processed by an on-chip digital filter. The first notch of this digital filter can be programmed via the on-chip control register allowing adjustment of the filter cutoff and settling time. The part features two differential analog inputs and a differential reference input. Normally, one of the channels will be used as the main channel with the second channel used as an auxiliary input to periodically measure a second voltage. It can be operated from a single supply (by tying the VSS pin to AGND) provided that the input signals on the analog inputs are more positive than -30 mV. By taking the VSS pin negative, the part can convert signals down to -VREF on its inputs. The AD7710 thus performs all signal conditioning and conversion for a single or dual channel system. The AD7710 is ideal for use in smart, microcontroller based systems. Input channel selection, gain settings and signal polarity can be configured in software using the bidirectional serial port. The AD7710 contains self-calibration, system calibration and background calibration options and also allows the user to read and write the on-chip calibration registers. CMOS construction ensures low power dissipation and a software programmable power down mode reduces the standby power consumption to only 7 mW typical. The part is available in a 24-pin, 0.3 inch-wide, plastic and hermetic dual-in-line package (DIP) as well as a 24-lead small outline (SOIC) package.
The AD7710ANZ is a 24-pin DIP integrated circuit from Analog Devices. It is a low power, low noise, 24-bit sigma-delta analog-to-digital converter (ADC) with an on-chip temperature sensor. Features:
재고:2000
최소:1
즐겨 찾기
Description: The AD678BD is a high speed, low power, monolithic 8-bit multiplying digital-to-analog converter (MDAC) from Analog Devices. Features: Low power consumption: 2.5 mW High speed: 1.5 μs
재고:2000
최소:1
즐겨 찾기
Description: The AD1376JD is a low power, low noise, monolithic, dual operational amplifier with rail-to-rail input and output. Features: - Low noise: 2.3 nV/√Hz - Low power: 1.3 mA/amplifier - Rail-
재고:2000
최소:1
즐겨 찾기
SOP-28
Maxim Integrated
07+
400ksps, +5V, 8-/4-Channel, 12-Bit ADCs with +2.5V Reference and Parallel Interface
재고:2000
최소:1
즐겨 찾기
DIP20
National Semiconductor
N/A
8-Bit uP Compatible A/D Converters with Multiplexer Options
Description: The ADC0844CCN is an 8-bit successive approximation analog-to-digital converter (ADC) manufactured by Texas Instruments. Features: 8-bit resolution Successive approximation conversion
재고:10000
최소:2
즐겨 찾기
Description: 8-Bit Serial Input, Voltage Output, Multiplying DAC Features: 8-Bit Resolution Voltage Output Serial Input Low Power Consumption Low Cost Low Offset and Gain Errors Low No
재고:5000
최소:1
즐겨 찾기
TSSOP16
National Semiconductor
12+
8-Channel, 50 kSPS to 200 kSPS, 10-Bit A/D Converter
재고:10000
최소:2
즐겨 찾기
Description: The ADC1005CCJ-1 is a 10-bit, monolithic, CMOS analog-to-digital converter (ADC) with a serial interface. Features: 10-bit resolution Monolithic CMOS construction Low power consumption
재고:2000
최소:1
즐겨 찾기
재고:2000
최소:1
즐겨 찾기
DIP-28
Burr-Browm
07+
Replaced by ADS8505 : 16-Bit 10us Sampling CMOS Analog-to-Digital Converter 28-PDIP
Description: 5V, Low Power, Low Dropout, CMOS Voltage Regulator Features: Output Voltage: 5V Output Current: 500mA Dropout Voltage: 0.4V Operating Temperature Range: -40°C to +85°C Low
재고:5000
최소:1
즐겨 찾기
SOP-24
Maxim Integrated
n/a
Low-Power, 12-Bit Sampling ADCs with Internal Reference and Power-Down
Description: 8-Channel, 12-Bit, Serial A/D Converters with +5V/±10V Input Ranges Features: 8 Single-Ended or 4 Differential Inputs 12-Bit Resolution ±10V, 0V to +5V Input Ranges 2MHz Conversi
재고:10000
최소:2
즐겨 찾기
재고:10000
최소:1
즐겨 찾기
SOP-28
National Semiconductor
10-Bit 600 ns A/D Converter with Input Multiplexer and Sample/Hold
재고:10000
최소:2
즐겨 찾기
Description: The AD574AJN is a precision 8-bit successive approximation analog-to-digital converter (ADC) with an on-chip track-and-hold amplifier. Features: 8-bit resolution On-chip track-and-hold
재고:5000
최소:1
즐겨 찾기
Description: The ADS122C04IPWR is a low-power, 24-bit delta-sigma analog-to-digital converter (ADC) with integrated temperature sensor from Texas Instruments. Features: - 24-bit resolution - Low powe
재고:2000
최소:1
즐겨 찾기
TQFP-48
Texas Instruments
Octal Channel Single ADC Delta-Sigma 780sps 24-bit Serial 48-Pin TQFP T/R
재고:5000
최소:1
즐겨 찾기
재고:5000
최소:1
즐겨 찾기
재고:2000
최소:1
즐겨 찾기
DIP-20
Analog Devices
90+
LC2MOS HIGH-SPEED uP-COMPATIBLE 8-BIT ADC WITH TRACK/HOLD FUNCTION
재고:10000
최소:1
즐겨 찾기
생산 전문가 중지, 우리는 유지 보수 회사를 용이하게하기 위해 생산이 중단되고 찾기 어려운 많은 전자 부품을 제공 할 수 있습니다