Buy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country Code
Favorite
Utsource certified original
Utsource certified original parts provide the following guarantees:
1. Utsource guarantees 100% original.
2. Utsource certified original parts can be returned and refunded unconditionally within 90 days.
Description
Quad Single Supply Comparators
All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
Description
The LM339 is a complete remote control decoder in an 8 pin package. With the addition of a standard infrared receiver module, three individual outputs can be simultaneously controlled using a television remote control transmitter. This circuit responds to Sony television control codes, chosen because most universal remotes default to them when initially powered up.
The LM339 continuously monitors the stream of data from an infrared receiver module looking for these Sony type remote control codes. If an appropriate three digit code is detected, the selected output either turns on, turns off, or switches its state.
Features
● Low power CMOS design - typically 1mA at 5V
● Three separate outputs
● Pulse output for momentary controls
● Signal received output for visual feedback
● Easy interface to standard receiver modules
● Works with universal TV remote transmitters
● High current drive outputs - up to 25mA
Water Tank Level Indicator Using LM339
Project Overview
In this project we are going to discuss how to build a water tank level indicator using LM339 as the main component and using few other components. We are going to show four water levels using four LEDs. We are going to use all four differential comparators inside the LM339 IC. Let’s identify our main component LM339 and it’s characteristics.
What is LM339?
LM339 is a “Quad Differential Comparators”. In this quad means four hence the LM339 has four differential comparators in a single package.
What is a differential comparator?
Differential comparator is an operational amplifier configuration which compares two inputs and give an output according to the input voltage.
Output of the differential comparator is always either high or low it doesn’t give a discrete or analog output. Differential comparators have two inputs, named inverting input and non-inverting input. Symbol of a comparator is shown in the below image.
Figure1 Symbol of differential comparator
When the voltage level in inverting input is greater than non-inverting input differential comparator will output the low level (this is the voltage connected to -Vcc of the differential comparator). When the voltage level in non-inverting input is greater than voltage level in inverting input differential comparator will output the High level (this is the voltage connected to +Vcc of the differential comparator). Characteristic graph of input Vs output of a differential comparator like LM339 is given below.
Figure2 Characteristic graph of input Vs output of a differential comparator
There is something special about the output of the LM339. It has open collector output. Which means when the output should be low the output pin will be connected to the GND as it should be. But when the output should be high it is not actually giving out any voltage it will act as a floating connection instead. A large resistance connected to Vcc is used to generate thins to a voltage level.
Pinout of LM339
LM339 come in 14 pin or 20 pin packages. As the 14 pin packages are most used, we are going to refer it. As mentioned before LM339 has four differential comparators inside. All four of these differential comparators are powered using a single power supply. Positive voltage input should be connected to the pin number 3 of the package. Pin 12 should be connected to the ground of the power supply. Each differential comparator in LM339 IC have 3 pins each. Below image shows the pinout of the 14 pin package of LM339 IC.
Figure3 Pinout and physical look of LM339 IC
From the below image you can get a clear idea how the four differential comparators are configured and connected inside the IC.
Figure3 Differential comparator layout of LM339 IC
Main Components
Lets see what are the required components for our project and what are the purpose of the components.
● LM339 Quad Differential Comparators
● BC547 NPN Transistors
● LEDs (Green, Yellow and Red)
● 1MΩ Resistors
● 100kΩ Resistors
● 10kΩ Resistors
● 220Ω Resistors
● Bare copper wires (used as probes)
Let’s find out what are purposes of these main components.
● LM339 Quad Differential Comparators
As mentioned before this the component that sense the water level. To do that we need a voltage difference.
We are going to use the resistivity difference of the water and air to get this done. This will be explained later in the tutorial.
● BC547 NPN Transistors
LM339 can only drive loads which draws current less than 20mA. But some LEDs can draw more than 20mA of current it can be harmful to LM339 IC to directly drive the LEDs. That is where the BC547 transistor comes in to play. It can drive higher current load using the signal from the LM339 IC’s differential comparator output.
● LEDs and Resistors.
LEDs are used to indicate the water level sensed by LM339 and resistors are used for current limiting and create voltage dividers in this circuit
Circuit Diagram of LM339 Water Level Indicator
Shown below is the circuit diagram of the LM339 tank water level indicator circuit. If the tank is full all four LEDs will be turned ON, if three quarter of the tank is full only the bottom three LEDs will be turned ON. If half of the tank is full only the bottom two LEDs will be illuminated and if tank is filled just more than quarter only the bottom LED will be lit. if the tank is empty none of the LEDs will be illuminated.
Figure 4 Circuit diagram
How this circuit works.
As you can see in above image there are five bare copper wires act as level probes. Longest one of these wires is connected to GND and other four are connected to one of the four differential comparators each, in the LM339 IC. R1 and R2 are forming a voltage divider of 2.5V it is fed in to inverting input of one of the comparators in LM339 and there R9 and water will form another voltage divider.
As water have less than 1MΩ resistance it will have less voltage than 2.5V that means when the probe is dip in water comparator output is set to logic low. This means R13 is connected to ground across the LM339 having a small voltage drop hence sending a base current to the BC547 transistor and LED is illuminated. All for differential comparators inside LM339 are connected to similar circuit to achieve four levels.
Preview of the first 3 pages of the data sheet
Some Part number from the same manufacture
Same catergory
6 buyer reviews from Philippines
Vytautas Kasparavicius
Length of registration:4 years
Consistent with the description, the quality is very good, it is genuine, very good and the price is affordable
0
0
Reply0
08/31/2022
Katherine Edwards
Length of registration:7 years
The LM339P is a quad voltage comparator integrated circuit from Texas Instruments. It is designed to provide high accuracy and low power consumption in a wide range of applications. It features a wide common-mode range, low offset voltage, and low input bias current. The LM339P is a popular choice for applications such as voltage monitoring, motor control, and power supply sequencing. Utsource is
0
0
Reply0
03/17/2023
VE366236 PEDRO PENUELA
Length of registration:10 years
Fast and everything according to what is requested
0
0
Reply0
09/23/2021
HS Electronics GST:27ARUPS0829C1ZH
Length of registration:9 years
Very satisfied with
0
0
Reply0
10/10/2020
mauricio galvez ve17343
Length of registration:5 years
Very satisfied with
0
0
Reply0
07/24/2020
mostafa fathallah
Length of registration:3 years
GOODS ARE PERFECT.Delivery very satisfied. THANK YOU VERY MUCH
0
0
Reply0
06/27/2020
Arthur Pieters
Length of registration:4 years
Very satisfied with
0
0
Reply0
06/30/2019
Гончаров Николай Викторович
Length of registration:7 years
Very satisfied with
0
0
Reply0
06/03/2019
Ruben Chuga
Length of registration:5 years
Responde apropiadamente
0
0
Reply0
11/05/2018
Sakun Pinto
Length of registration:11 years
Very satisfied with
0
0
Reply0
12/17/2017
European payment method
Asia payment method
America payment method
International payment method
Latest shipping video More
Order
Payment
Shipping
Gift Coupon/Plus service
Returning
Returns are normally accepted when completed within 60 days from the date of the parcel delivered.
Defective ( Please provide a third party quality report of nonconforming products)
Return Freight charges must be prepaid; we will not accept COD shipments.
Warranty
All UTSOURCE purchases have a 60 days money back return policy, plus a 90 days UTSOURCE warranty against any manufacturing defects.This warranty shall not apply to any item where defects have been caused by improper customer assembly, failure by customer to follow instructions, product modification, negligent or improper operation.
LM339
LM339 has several brands around the world that may have alternate names for LM339 due to regional differences or acquisition. LM339 may also be known as the following names:
BUYING OPTIONS
Stock Status: 10000
Minimum: 4
Total Price:
Unit Price:40.01344
Utsource Original Store
Total products: 2398063Total sales: 12735602
Country:
United States
Express:(FEDEX, UPS, DHL, TNT)Free shipping on first 0.5kg for orders over PHP11045.15,Overweight will be charged separately
JudyCustomer Manager
sales@utsource.com
(888) 766 5577
+86 15302769052
+1 (312)899-4831
(whatsapp only)
Your dedicated customer service, providing you the best service at any time.
6 sellers Choices
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company
Reply to
submit