Interface - Drivers, Receivers, Transceivers

Description: Low-Power, +3.0V to +5.5V, ±15kV ESD-Protected, True RS-232 Transceivers Features: ±15kV ESD Protection on All Pins Low Supply Current: 5.5mA (Max) Low Shutdown Current: 0.1μA (

Description: The ST3232ECDR is a low-power, dual-channel RS-232 transceiver with an integrated charge pump from Silead. Features: - Low power consumption - Low voltage operation - High data rate - ES

Description: MAX3243CPWRG4 is a low-power, low-voltage, 3.3V-powered, RS-232 transceiver with auto-shutdown and ±15kV ESD protection. Features: * Low-power operation: 3.3V supply voltage * Low-voltag

Description: The MAX487ESA+ is a low-power transceiver for RS-485 and RS-422 communication. It is a single-channel device that features a fail-safe receiver with ±15kV ESD protection. Features: Lo

MAX1489ECPD is a low-power, low-voltage, quad-channel RS-232 transceiver manufactured by Maxim Integrated. It is available in a 14-pin DIP package. Description: The MAX1489E is a quad-channel RS-232

Description: The HIN232CP is a high-speed, low-power, true RS-232 transceiver. Features: - High-Speed Data Rates up to 250 kbps - Low Power Consumption: 5 mA Typical - ±15 kV ESD Protection on all

Description: RS-485/RS-422 Transceiver Feature: ±15kV ESD Protection on RS-485/RS-422 Ports Slew-Rate-Limited Drivers Reduce EMI and Undesirable Overshoot Low Power Consumption: 5μA (MAX)

Description: RS-485/RS-422 Transceiver, 3.3V, 5V, 10Mbps, SSOP Features: Low-Power Consumption: 2.7mA Max 10Mbps Data Rate ±15kV ESD Protection on RS-485/RS-422 Ports Slew-Rate-Limited Drivers Red

Package: SO-8 Manufacturer: ST Description: The ST485EBDR is a half-duplex transceiver for RS-485 communication. It is designed to meet the requirements of EIA Standard RS-485 and ISO 8482:1987. Fea

Description: Low-Power, Slew-Rate-Limited, RS-485/RS-422 Transceivers Features: - Low-Power Shutdown Mode: <1μA - Slew-Rate Limited for Error-Free Data Transmission: 0.5V/μs - High-Impedance Inputs an

Description: The MAX3071EESA+T is a low-power, single-channel, low-voltage differential signaling (LVDS) line driver and receiver pair with integrated termination resistors. Features: Low-Power, Si

Description: SP3220EBEY-L/TR is a low voltage, low dropout (LDO) linear regulator from Sipex. It is designed to provide a regulated output voltage from a wide input voltage range. Features: Output v

Description: SP3238ECA-L/TR is a 3.3V powered, full-duplex, RS-232 transceiver with an integrated charge pump from Exar Corporation. Features: Low power consumption Low EMI/RFI Low supply current

Description: The SN75C1406NSR is a high-speed, low-power, quad differential line driver designed to meet the requirements of ANSI TIA/EIA-422-B and ITU Recommendation V.11. Features: * Low power cons

Description: USB1T11AM is a SOP14 package, FSC (Field-Effect Transistor) type device. Features: Low on-resistance Low input capacitance Low input leakage current High-speed switching High-tempera

Description: RS-232 Transceiver, 3.3V, 0.1μF, TSSOP Features: Low Supply Current: 5.5mA Low Shutdown Current: 0.1μA ±15kV ESD Protection on All Pins 3.3V Supply Operation ±5V Tolerant Inputs 0.1

Description: MAX202CSE+ is a dual RS-232 line driver/receiver with ±15kV ESD protection. It is designed to meet the requirements of EIA/TIA-232-F and ITU V.28/V.24 communications standards. Features:

Description: The MC33399DR2 is an integrated motor driver IC from Motorola. It is designed to drive two DC motors in a bidirectional manner. Features: * Output current: 2A (peak) * Operating voltage: