Buy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country Code
Favorite
Utsource certified used parts
Utsource certified used parts provide the following guarantees:
1. Utsource will inspect the goods, including appearance inspection (no serious damage to the appearance), select qualified and honest suppliers, and ensure 98% qualification rate.
2. Some parts are tested by machine.
3. Utsource certified parts can be returned and refunded unconditionally within 60 days.
Description
SmartSocket 256k
All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
Description
The DS1213C SmartSocket is a 28-pin, 600 mil DIP socket with a built-in CMOS controller circuit and an embedded lithium energy source. It accepts a 32K x 8 JEDEC bytewide CMOS static RAM. When the socket is mated with a CMOS RAM, it provides a complete solution o problems associated with memory volatility. The SmartSocket monitors incoming VCC for an out-of- tolerance condition. When such a condition occurs, the internal lithium energy source is automatically switched on and write protection is unconditionally enabled to prevent data corruption.
Using the SmartSocket saves printed circuit board space since the SRAM/SmartSocket combination occupies no more area than the memory alone. The SmartSocket uses only Pins 20 and 28 for RAM control. All other pins are passed straight through. See the DS1213B SmartSocket data sheet for technical details.
DS1213C description
The DS1213C SmartSocket is a 28-pin, 600mil dual in-line package socket with a built-in Complementary Metal Oxide Semiconductor (CMOS) controller circuit and an embedded lithium energy source which is manufactured by Maxim integrated company. It allows a 32k x 8 JEDEC byte wide CMOS static RAM. When the socket DSC1213C is mated with a CMOS RAM, it provides a comprehensive solution of problems associated with memory volatility. This device monitors the incoming Vcc for an out-of-tolerance condition. When a condition like that happens, the internal lithium energy source is automatically going to the switching ON condition and write protection is unconditionally enabled to avoid the corruption of data.
DS1213C Pin Configuration
When we are using the DSC1213C SmartSocket, it saves the space in the printed circuit board since the SRAM/SmartSocket combination inhabits no more area than the memory alone. The DSC123C SmartSocket takes only Pins 20 and 28 for the controlling of RAM. All the other remaining pins are passed straight through.
DS1213C Features
Some of the key features of this device are given below.
· Standard 32k x 8 CMOS static RAMs are accepted.
· Embedded lithium energy cell which will keep RAM data
· Self-contained circuitry which safeguards the data
· With the proper RAM selection data retention time will be greater than 10 years.
· Fully optimized gas-tight socket contacts
· Operating temperature range 0℃ to 70℃
Function of DS1213C
The SmartSocket DS1213C performs five circuit functions necessary for implementing battery backup on a CMOS memory. The first function is the device has a switch that is provided to direct power from the battery or Vcc supply, depending on which is greater. This switch has a voltage drop which will not exceed 0.2V. The second function is power fail detection at input voltages less than 4.75V.DS1213C constantly monitors the Vcc supply. When Vcc falls below 4.75V, a precision comparator detects the condition and inhibits the enabling of the RAM chip.
The third function accomplishes write protection by holding the chip enable signal to the memory to within 0.2V of Vcc or battery supply. If the chip enables signal is active at the time power fail detection occurs, write protection is delayed until after the memory cycle is complete to avoid corruption of data. During nominal power supply conditions, the memory chip enables signal will be passed through to the socket receptacle with a maximum propagation delay of 20 nanoseconds.
The SmartSocket’s fourth function is to check battery status and warn of potential data loss. Each time that Vcc power is restored to the SmartSocket, the battery voltage is compared with a precision comparator. If the battery supply is below 2.0V, the second memory cycle is inhibited. Battery status can therefore be determined by performing a read cycle after powerup to any location in the memory recording the contents of that memory location. A subsequent write cycle can then be executed to the same memory location changing the data. If the next read cycle fails to verify the written data, the contents of the memory are questionable because the battery may not have retained it.
The fifth function is battery redundancy. In many applications data integrity is paramount. The DS1213C has internal batteries. During the battery backup time the battery with the highest voltage is selected for use. If one battery dies, the other automatically takes over. The switch between batteries is transparent to the user. A battery status warning occurs only if both batteries are less than 2.0V. Each of the two lithium cells contains 35mA per hour capacity.
DS1213C Applications
The DS1213C SmartSocket is outdated now, this can be replaced mostly using a pin-compatible, equivalent-density 5V NV SRAM DS1230 module. Below are some of its applications.
· Motor vehicle crash boxes
· Data logging applications
· Some medical equipment’s and high-end servers which needs to store data
5V NV SRAMDS1230 Which replaces DS1213C
Preview of the first 3 pages of the data sheet
Some Part number from the same manufacture
Same catergory
204 buyer reviews from Australia
Kenneth Harris
Length of registration:7 years
I recently tested the Utsource DS1213C integrated circuit and was very pleased with the results. The circuit was easy to install and worked flawlessly. The circuit was well designed and provided reliable performance. I was also impressed with the quality of the components and the overall build quality of the circuit. I would highly recommend this product to anyone looking for a reliable and cost-e
0
0
Reply0
03/17/2023
European payment method
Asia payment method
America payment method
International payment method
Latest shipping video More
Order
Payment
Shipping
Gift Coupon/Plus service
Returning
Returns are normally accepted when completed within 60 days from the date of the parcel delivered.
Defective ( Please provide a third party quality report of nonconforming products)
Return Freight charges must be prepaid; we will not accept COD shipments.
Warranty
All UTSOURCE purchases have a 60 days money back return policy, plus a 90 days UTSOURCE warranty against any manufacturing defects.This warranty shall not apply to any item where defects have been caused by improper customer assembly, failure by customer to follow instructions, product modification, negligent or improper operation.
DS1213C
DS1213C has several brands around the world that may have alternate names for DS1213C due to regional differences or acquisition. DS1213C may also be known as the following names:
BUYING OPTIONS
Stock Status: 5000
Minimum: 1
Total Price:
Unit Price:19.16187
UTSOURCE
Country:
United States
Express:(FEDEX, UPS, DHL, TNT)Free shipping on first 0.5kg for orders over AU $295.12,Overweight will be charged separately
JudyCustomer Manager
sales@utsource.com
(888) 766 5577
+86 15302769052
+1 (312)899-4831
(whatsapp only)
Your dedicated customer service, providing you the best service at any time.
3 sellers Choices
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company
Reply to
submit