≥1:
S$48.40095
Buy(0)
Inquiry(0)
Dear customers, due to the implementation of the GDPR policy in Europe, UTSOURCE has also made adjustment accordingly to meet the policy requirements. Please read the new privacy policy carefully and this window will no longer pop up after you accept it.
Delivery Address
+ Add Address
The new shipping address
* Please fill in the cell phone number correctly to make sure that you can receive the tracking info in time.
Country CodeSearch results filter:
Home > Elec-component > IC Chips > PMIC - V/F and F/V Converters
CAN-10
Analog Devices
96+
The AD537 is a monolithic V-F converter consisting of an input amplifier, a precision oscillator system, an accurate internal reference generator and a high current output stage. Only a single external RC network is required to set up any full-scale (F.S.) frequency up to 100 kHz and any F.S. input voltage up to ±30 V. Linearity error is as low as ±0.05% for 10 kHz F.S., and operation is guaranteed over an 80 dB dynamic range. The overall temperature coefficient (excluding the effects of external components) is typically ±30 ppm/°C. The AD537 operates from a single supply of 5 V to 36 V and consumes only 1.2 mA quiescent current. A temperature-proportional output, scaled to 1.00 mV/K, enables the circuit to be used as a reliable temperature-to-frequency converter; in combination with the fixed reference output of 1.00 V, offset scales such as 0°C or 0°F can be generated. The low drift (1μV/°C typ) input amplifier allows operation directly from small signals (e.g., thermocouples or strain gages) while offering a high (250 M(Ohm) input resistance. Unlike most V-F converters, the AD537 provides a square-wave output, and can drive up to 12 TTL loads, LEDs, very long cables, etc. The excellent temperature characteristics and long-term stability of the AD537 are guaranteed by the primary bandgap reference generator and the low T.C. silicon chromium thin film resistors used throughout. The device is available in either a TO-116 ceramic DIP or a TO-100 metal can; both are hermetically sealed packages. The AD537 is available in three performance/temperature grades; the J and K grades are specified for operation over the 0°C to +70°C range while the AD537S is specified for operation over the extended temperature range, -55°C to +125°C.
AD537JH is a monolithic integrated circuit from Analog Devices. It is a precision, low-cost, low-power, single-supply, 8-bit analog-to-digital converter (ADC). Description: The AD537JH is an 8-bit, l
Stock:2000
Minimum:1
Favorite
Description: The AD652KP is a low power, low cost, monolithic, temperature compensated, voltage-to-frequency converter. Features: Low power: 5 mW max Low cost Monolithic construction Tempe
Stock:5000
Minimum:1
Favorite
SOP8
National Semiconductor
0514+
LM2907/LM2917 Frequency to Voltage Converter; Package: SOIC NARROW; No of Pins: 8; Qty per Container: 2500; Container: Reel
Stock:10000
Minimum:1
Favorite
The LM331N is a precision voltage to frequency converter manufactured by National Semiconductor. It is available in an 8-pin DIP package. Description: The LM331N is a voltage-to-frequency converter t
Stock:10000
Minimum:2
Favorite
Description: The AD537SD is a monolithic, low cost, precision, temperature-compensated, voltage-to-frequency converter. Features: Low Cost Wide Supply Range: 4.5V to 18V Low Temperature Coefficien
Stock:5000
Minimum:1
Favorite
SOP-8
Analog Devices
1323+
Low Cost Monolithic Voltage-to-Frequency Converter
Package: SOP-8 Manufacturer: AD Description: The AD654JRZ-REEL is a low cost, low power, monolithic voltage-to-frequency converter. It is designed to provide a linear output frequency response over a
Stock:2000
Minimum:1
Favorite
PLCC-20
Analog Devices
Volt to Frequency and Frequency to Volt Converter IC 1MHz ±0.02% 20-PLCC (9x9)
Description: The AD650JPZ is a low power, low noise, wide bandwidth, precision, monolithic, voltage-to-frequency converter (VFC). Features: Low power: 5 mW Low noise: 0.5 Hz/V Wide bandwidth: 0.1
Stock:5000
Minimum:1
Favorite
DIP-14
Texas Instruments
03+
Voltage-to-Frequency and Frequency-to-Voltage CONVERTER
Stock:5000
Minimum:1
Favorite
PLCC-20
Analog Devices
Voltage to Frequency Converter IC 2MHz ±0.02% 20-PLCC (9x9)
Stock:2000
Minimum:1
Favorite
Stock:10000
Minimum:1
Favorite
Description: The LM2917M is a low power, wide supply voltage range, low-noise, voltage-controlled oscillator (VCO). Features: Wide supply voltage range: 2.7 V to 5.5 V Low power consumption: 1.3 mA
Stock:10000
Minimum:2
Favorite
Description: The LM2917N-8 is a precision frequency-to-voltage converter designed to convert a frequency input into a linear voltage output. Features: Input Frequency Range: 0.1 Hz to 1 MHz Input V
Stock:10000
Minimum:2
Favorite
Stock:10000
Minimum:1
Favorite
Description: The LM2917N-8 is a precision frequency-to-voltage converter designed to convert a frequency input into a linear voltage output. Features: Input Frequency Range: 0.1 Hz to 1 MHz Input V
Stock:10000
Minimum:2
Favorite
PDIP-14
Analog Devices
O614
Voltage-to-Frequency and Frequency-to-Voltage Converter
Stock:5000
Minimum:1
Favorite
Stock:2000
Minimum:1
Favorite
Description: The AD650BD is a low power, low noise, precision instrumentation amplifier. Features: Low power: 1.7 mA max Low noise: 0.9 μVrms max Wide bandwidth: 1 MHz Low offset voltage:
Stock:2000
Minimum:1
Favorite
DIP8
National Semiconductor
LM231A/LM231/LM331A/LM331 Precision Voltage-to-Frequency Converters; Package: MDIP; No of Pins: 8; Qty per Container: 40/Rail
Description: The LM331N/NOPB is an adjustable precision voltage to frequency converter from Texas Instruments. Features: * Wide supply voltage range: 3V to 32V * Low power consumption * High accuracy
Stock:10000
Minimum:2
Favorite
TEL:83664990
Analog Devices
13+
3 V/5 V Low Power, Synchronous Voltage-to-Frequency Converter
Stock:10000
Minimum:1
Favorite
DIP-14
Texas Instruments
2012+
Voltage-to-Frequency and Frequency-to-Voltage CONVERTER
Stock:5000
Minimum:1
Favorite
Stop production experts, we can provide a large number of electronic components that have been stopped production and are difficult to find, to facilitate the maintenance company