≥1:
US $8.75520
Delivery Address
+ 添加地址
新的货运地址
*为了您能及时收到到货信息,请正确填写手机号。
国家代码DIP-14
Burr-Browm
0524/
Digitally Controlled Programmable-Gain INSTRUMENTATION AMPLIFIER
库存:5000
起订量:1
添加到收藏夹
SOP-14
Texas Instruments
06+
The TLE206x series of low-power JFET-input operational amplifiers doubles the bandwidth of the earlier generation TL06x and TL03x BiFET families without significantly increasing power consumption. Texas Instruments Excalibur process also delivers a lower noise floor than the TL06x and TL03x. On-chip zener trimming of offset voltage yields precision grades for dc-coupled applications. The TL206x devices are pin-compatible with other TI BiFETs; they can be used to double the bandwidth of TL06x and TL03x circuits, or to reduce power consumption of TL05x, TL07x, and TL08x circuits by nearly 90%. BiFET operational amplifiers offer the inherently-higher input impedance of the JFET-input transistors, without sacrificing the output drive associated with bipolar amplifiers. This makes them better suited for interfacing with high-impedance sensors or very low-level ac signals. They also feature inherently better ac response than bipolar or CMOS devices having comparable power consumption. The TLE206x family features a high-output-drive circuit capable of driving 100- loads at supplies as low as ±5 V. This makes them uniquely suited for driving transformer loads in modems and other applications requiring good ac characteristics, low power, and high output drive. Because BiFET operational amplifiers are designed for use with dual power supplies, care must be taken to observe common-mode input voltage limits and output swing when operating from a single supply. DC biasing of the input signal is required and loads should be terminated to a virtual ground node at mid-supply. Texas Instruments TLE2426 integrated virtual ground generator is useful when operating BiFET amplifiers from single supplies. The TLE206x are fully specified at ±15 V and ±5 V. For operation in low-voltage and/or single-supply systems, Texas Instruments LinCMOS families of operational amplifiers (TLC- and TLV-prefixes) are recommended. When moving from BiFET to CMOS amplifiers, particular attention should be paid to slew rate and bandwidth requirements, and output loading. The Texas Instrument TLV2432 and TLV2442 CMOS operational amplifiers are excellent choices to consider.
The TLE2064ACD is a high-speed, low-power operational amplifier manufactured by Texas Instruments. It is a single-channel, low-noise, low-distortion, wide-bandwidth amplifier with a gain bandwidth of
库存:10000
起订量:2
添加到收藏夹
Description: The LF356N is a low power JFET input operational amplifier. Features: * Low power consumption * High input impedance * Low noise * High slew rate * Wide bandwidth * High common mode reje
库存:10000
起订量:4
添加到收藏夹
Description: The AD711JR is a low power, precision CMOS operational amplifier. It is designed to operate on a single supply of 2.7 V to 5.5 V and is specified over the extended industrial temperature
库存:10000
起订量:2
添加到收藏夹
Description: The AMP02FP is a high-speed, low-power, low-noise, rail-to-rail output operational amplifier from Analog Devices. Features: * Rail-to-rail output * Low noise: 4.5 nV/√Hz * Low power: 1.2
库存:5000
起订量:1
添加到收藏夹
库存:10000
起订量:4
添加到收藏夹
DIP-14
Ti/st
07+
Zener Diode; Package/Case:SOT-23; Breakdown Voltage Max:6.8V; Leaded Process Compatible:Yes; Mounting Type:Surface Mount; Peak Reflow Compatible 260 C:Yes; Power Dissipation:300mW
Manufacturers: TI/ST Package: DIP-14 Description: The TL084ACN is a low-power JFET-Input operational amplifier from Texas Instruments. It offers high-speed performance at modest cost and is suitable f
库存:10000
起订量:2
添加到收藏夹
库存:10000
起订量:1
添加到收藏夹
Description: The MC33174D is a high-speed, low-power CMOS operational amplifier. Features: High Speed: 4.5 V/μs Low Power: 2.5 mA/Amplifier Low Input Offset Voltage: 0.5 mV Low Input Bias Current:
库存:10000
起订量:2
添加到收藏夹
TO-220
Ti/bb
n/a
High-Voltage, High-Current Op Amp, Excellent Output Swing 7-TO-220 -40 to 85
Description: The OPA547T is a high-speed, high-voltage, high-current operational amplifier from Texas Instruments. It is designed to drive high-power loads such as motors, solenoids, and lamps. Featu
库存:5000
起订量:1
添加到收藏夹
OPA445BM is a high-performance operational amplifier from Texas Instruments. It is a single-channel, low-power, low-noise, rail-to-rail input/output amplifier. It is available in a CAN-8 and BB packag
库存:5000
起订量:1
添加到收藏夹
Description: The LM10CLN is a monolithic integrated circuit designed for use as a voltage regulator in a wide variety of applications. Features: Output voltage range of 1.2V to 37V Output current u
库存:10000
起订量:2
添加到收藏夹
Description: Dual Low-Noise JFET-Input Operational Amplifier Features: Low noise: 15nV/√Hz Low input bias current: 20pA Low distortion: 0.005% High slew rate: 16V/μs Output short-circ
库存:10000
起订量:2
添加到收藏夹
Description: The NE5532N is a dual low-noise operational amplifier from Philips Semiconductors. It is designed for high-performance audio applications. Features: * Low noise: 4.5 nV/√Hz * Low distort
库存:10000
起订量:3
添加到收藏夹
TL052ACP is a dual low-power operational amplifier from Texas Instruments. It is a monolithic integrated circuit with two independent, high-gain, internally frequency-compensated operational amplifier
库存:10000
起订量:2
添加到收藏夹
LT) Description: The LT1010CH is a low-power, high-performance, low-dropout, three-terminal adjustable linear regulator. Features: * Low quiescent current: 10μA (typical) * Low dropout voltage: 0.3V
库存:5000
起订量:1
添加到收藏夹
Description: The LM348M is a quad operational amplifier with high gain and internal frequency compensation. Features: Wide common-mode (up to VCC +) and differential voltage range Low power consumpt
库存:10000
起订量:2
添加到收藏夹
库存:10000
起订量:2
添加到收藏夹
The AD708BQ is an 8-pin CMOS analog switch designed by Analog Devices. It is a single-pole, double-throw (SPDT) switch with a low on-resistance of 0.5Ω. The device is designed to operate from a single
库存:5000
起订量:1
添加到收藏夹
SOP-14
National Semiconductor
06+
Quad Operational Amplifier JFET; Package: SOP; No of Pins: 14; Container: Rail
Description: Quad JFET-Input Operational Amplifier Features: Low Input Offset Voltage: 1.0mV max Low Input Bias Current: 500pA max Low Input Offset Current: 500pA max High Open Loop Gain: 120dB mi
库存:10000
起订量:5
添加到收藏夹
停止生产专家,我们可以提供大量已经停止生产且难以找到的电子零件,以方便维修公司